Two versions of the 2013 Toyota Camry are available, one with a 3.5L engine and the other with a 2.5L engine. Toyota advises using a totally synthetic motor oil that complies with the dexos certification standards for both of these vehicles. While the larger 3.5 L engine can hold up to 6.4 quarts, the smaller 2.5 L engine can hold up to 4.4 quarts. The greatest results are obtained for both autos when using sae 5w-30 viscosity oil, while semi-synthetic lubricants are also acceptable substitutes. Toyota advises getting your oil changed every 5,000 miles or so. Depending on where you live, this procedure normally costs between $100 and $200 and entails replacing both the oil and the oil filter.
SAE 0W-20 is the recommended oil for the 2013 Toyota Camry. SAE 5W-20 oil may be used if SAE 0W-20 is unavailable. At the subsequent oil change, SAE 0W-20 must be used in its place. SAE 5W-30 is the recommended engine oil for the 2013 Toyota Camry 3.5L. The 2013 Toyota Camry’s 3.5L engine can hold 6.4 quarts (6.1 liters) of oil, while the 2.5L engine can hold 4.4 quarts (4.2 liters).
If the 2013 Camry SE’s 3.5L engine needs to be serviced, it will consume 6.4 quarts (and it always should be). It requires synthetic oil 0W20. An oil change is possible every 5,000 miles.
In This Article...
What sort of oil will fit in a Toyota Camry?
The Toyota Camry 2020 requires 0W-20 synthetic motor oil. Toyota sells an additive at Toyota dealerships that is applied to their OEM oil. However, any ILSAC-certified 0W-20 synthetic oil will function. If 0W-20 synthetic oil is not available, 5W-30 mineral oil will function in its place. At the subsequent oil change, it must be replaced with 0W-20 synthetic oil.
How often should I change the oil in my Camry?
The owner’s manual for your Camry contains a list of the precise service intervals. However, the interval for the most majority of synthetic oil situations is every 10,000 miles or 12 months*. The interval for older Camry vehicles that utilize 5W-30 mineral oil is 5,000 miles/6 months. Even in vehicles with a 10,000-mile/12-month oil change interval, other maintenance like tire rotation and fluid adjustments still needs to be done every 5,000 miles/6 months.
*According to Toyota standards, this period is reduced to 5,000 miles/6 months if you frequently make short excursions (i.e., only in cities) in below-freezing conditions or with heavy idling.
Does my Toyota Camry require synthetic oil?
Only Solution. Only Toyota cars (apart from 3UR-FBE Engines*) that require 0w-20 synthetic oil have been given the go-ahead for longer oil change intervals of 10,000 miles or 12 months. (You should, though, keep checking the oil level frequently and topping off as necessary.
What is engine oil 0W-20?
In colder temperatures, 0W-20 motor oil flows as freely as 0 Weight oil, but once the engine reaches operating temperature, it behaves more like 20 Weight oil. This guarantees that oil will begin to flow through the engine right away, lubricating important engine components even in cold weather.
The ‘W’ in viscosity descriptions does not, contrary to popular belief, stand for weight. In actuality, it represents Winter. This means that synthetic 0W-20 oil performs as a 0 Weight oil in cold areas but becomes as thick and viscous as a 20 Weight oil once the typical engine temperature has been attained.
Castrol EDGE, a cutting-edge full synthetic 0W-20 motor oil, is part of the company’s line of low viscosity 0W-20 lubricants. It is our toughest oil and is made to endure high temperatures and pressure. For those who want to push their car to the limit, it’s the perfect choice. Full synthetic 0W-20 motor oil liquid Castrol GTX MAGNATEC is designed with protective, clever ingredients that offer outstanding wear prevention.
Is 5w30 a viable alternative to 5w20?
Yes. Using an oil with a greater viscosity, like 5w30, won’t cause short-term damage to your engine. To create uniform criteria for achieving realistic fuel efficiency and engine operating conditions, automakers collaborate closely with industry oil specialists like the SAE. These guidelines enable automakers to use particular oil grades and viscosities to achieve MPG and engine life objectives. The SAE claims that using low viscosity engine oil to increase fuel efficiency not only reduces frictional loss of the engine oil seal but also has no performance flaws.
Even though there are few practical differences between 5w30 and 5w20 in terms of fuel economy and engine wear, utilizing the recommended oil grade could void your powertrain warranty if the manufacturer. However, if your warranty is no longer valid, you can use any oil without any problems.
While using a thicker oil, such as 5w30, won’t cause your engine any short-term harm. It is advised that you, whenever feasible, abide by manufacturer recommendations.
Can I substitute 5W20 for 0W20?
One of the low-temperature grades added to the SAE J300 EOVC system after 1952 is 0W20 motor oil (0W20 oil). It is a liquid designed to behave as an SAE 20 once the engine reaches its operating temperature but flow as easily as an SAE 0 in subzero conditions.
Even at -35C/-31F, this type of oil will still start to flow through the engine’s oil channels. This oil lubricates important engine components, making it simpler for you to start your engine cold in the winter.
W20 vs 5W20 Fuel Economy
Another low-temperature grade often advised for winter use is 5W20 motor oil, with 10W-30 serving as an option for higher temperatures. Because it offers the best fuel economy, reduces fuel consumption, and produces fewer exhaust pollutants, this oil type is widely used. Motor companies and governments all around the world, led by those in Japan, Europe, and the US, are looking for 5W20.
Low viscosity, high-quality synthetic grades 0W20 and 5W20 can both significantly improve fuel economy. When employed in fair-weather temperatures, their attributes are identical. When utilized in cold temperatures, there is little to no difference between the two variants.
Toyota uses what kind of synthetic oil?
For brand-new vehicles, Toyota suggests using Toyota Genuine SAE 0W-20 Full-Synthetic motor oil. Older models might need Toyota Genuine 5W-30 motor oil; if in doubt, check with one of our service consultants or the owner’s manual.
How much oil does a 4-cylinder 2013 Camry consume?
For instance, a 4-cylinder engine needs at least 5 quarts of oil, whereas a 6-cylinder engine needs about 6 quarts.
Toyota 0W-20 oil is synthetic, right?
Finding the ideal motor oil for your car is more challenging now that there are so many options available. Oil types like OW-20 are currently becoming much more widespread. Why should you use this oil? What is it?
Toyota car owners now favor the new 0W-20 Oil over other types of oils.
The cost of a quart of the pure synthetic 0W-20 oil is approximately $6.36. Although a quart costs quite a bit, it is the best oil you can use in your Toyota.
The use of synthetic oil is spreading. Simply said, it outperforms traditional motor oil in a wider range of driving circumstances and doesn’t degrade as quickly. Toyota advises using it in all of their vehicles, with the exception of select 4Runner/Tacoma and Flex Fuel Tundra/Sequoia models, because it is so well-liked (see: is Synthetic Oil Good or Bad).
Visit your local Toyota dealership soon and ask about this new, lighter oil. These days, it is the ideal option for your Toyota automobile.
When did Toyota begin using synthetic oil?
Vehicles from Toyota and Scion will start using synthetic lubricants starting with the 2010 model year (SAE 0W-20). Toyota’s shift keeps it in front of the most recent pollution standards for automakers.