How To Reset Maintenance Light Toyota Sienna 2006

Photodisc/Getty Images/Ryan McVay

Your 2006 Sienna’s MAIN REQD light may occasionally remain on after you’ve changed the oil. The warning light, which flashes when it’s time for an oil change, ordinarily appears every 5,000 to 7,500 miles. You must reset the light by carrying out a few simple actions in order to turn it off.

Step 1

When the LCD odometer display appears to the left of the steering wheel, your automobile has started. Pushing down the PUSH ODO/TRIP button until ODO appears on the display will then set the odometer to total miles as opposed to trip A or trip B.

Step 2

Hold down the odometer button while you turn off the car. With the automobile not running, turn the key to the on position.

Holding down the button, wait for the maintenance light to flicker and then turn off. Release the button, then flip the switch to the off position. Your maintenance light ought to be turned off by now.

In a Toyota Sienna, how do I turn the maintenance light back on?

In many vehicles, persistent maintenance lights are a regular problem. Typically, there is no electrical issue; instead, your mechanic just neglected to reset the alert after your service was finished.

Just adhere to these simple steps to reset the maintenance required light on your Toyota Sienna:

  • Put your ignition key in accessory mode. You shouldn’t start your engine.
  • Find the ODO/TRIP button and press it until ODO appears on the display.
  • OFFSET your Sienna.
  • As you continue to hold down the ODO/TRIP button, turn on your car.
  • You have reset the maintenance light when the odometer display shows just zeros.
  • Once more, turn off your car.

Your car is not in need of maintenance, so you can drive with a little more confidence now that the maintenance light is off. Check out the Jerry app to see how much you could be saving on auto insurance before you get back on the road.

After you download Jerry, all you need to do is respond to a few questions that will take you around 45 seconds to do, and you’ll get car insurance rates for coverage that is identical to your current plan right away. Customers of Jerry save $879 year on average.

How can I dim the maintenance is necessary light?

How do I turn the “Maint Reqd” light back on?

  • Switch the ignition to the ON position.
  • Set the trip display to TRIP A mode on the odometer.
  • Activate the OFF position on the ignition switch.
  • Turn the ignition switch to the ON position while pressing and holding the Trip Meter RESET button.
  • It will do so via the service maintenance reminder light.

Where is the 2006 Toyota Sienna’s Trac Off button?

If you push the TRAC OFF button, which is probably found on the left side of the steering wheel, you will see the TRAC OFF light appear on your Toyota dashboard. Whether you intentionally or unintentionally hit the button, it disables the traction control and/or vehicle stability control systems in your car. The VSC indicator has the word OFF and the image of a car sliding.

When should you turn off TRAC?

You might need to turn off TRAC or VSC if your Toyota becomes stuck in mud or snow. When you’re stuck, the systems could restrict the amount of power going from the engine to the wheels, which is not ideal. It may be simpler to rock your car out of the mud or snow if the systems are disabled. You only need to press the TRAC OFF button to turn it off. When your dashboard displays the TRAC OFF indicator, you will know you were successful. Just press the button once more to turn it back on.

Do you have any questions about the additional buttons or indicators in your Toyota? For further information, feel free to contact our staff at Toyota Vacaville or your nearby Toyota dealer.

What does the Toyota Sienna’s check engine light signify?

Your Toyota Sienna’s check engine light should be brought in right away if it starts flashing, which indicates that the issue requires immediate repair. Typically, this blinking light denotes a severe engine misfire that allows unburned fuel to escape into the exhaust system.

Why does my maintenance light come on after I change the oil?

  • The ODO display will briefly flash before beginning to display only zeros.
  • Turn the key in the ignition while maintaining pressure on the ODO button. till the dash lights turn on. Avoid starting the car.
  • Release the ODO button once it starts to show zeros, then flip the key back to the “off” position.
  • If the car is on, turn it off.
  • Verify that the odometer’s (ODO) total mileage displaytypically the ‘A’ displayis on.
  • Now the light will read “MAINT REQD.”
  • Press and hold the ODO reset / readout button while the engine is off.

What ‘MAINT REQD’ Means

Within 5000 miles of the last reset, the “MAINT REQD” indicator illuminates. It is merely a mileage counter meant to serve as a reminder to the user that an oil change is required and in no way indicates any system failure. If a specialist has always performed maintenance on your Toyota, they reset it after each oil change. It should be noted that the recommended oil change interval is not always 5000 miles. To find out how frequently the oil in your Camry needs to be changed, consult the owner’s manual and your usual technician.

Need Help?

Our service team would be delighted to assist you. Our entire staff of experts is Toyota-certified and adept in resolving even the most challenging problems with your Toyota. Make an appointment right away!

My maintenance is necessary light is on, why?

The mileage is the only factor that activates the maintenance required light, also known as the service required light. When this light turns on, different automakers have varying standards. For instance, the maintenance needed light on a car might turn on once every 10,000 lights and stay lit until it is manually turned off.

The oil change, spark plug replacement, new tire, etc. are just a few examples of the routine maintenance that should be performed on a vehicle.

When servicing your vehicle, mechanics typically reset the maintenance required light. The process for resetting the maintenance required light differs based on the make and type of the car, yet, if they don’t, you can do it yourself.

How can my Toyota maintenance be reset?

In order to start the car, turn the ignition to position one after inserting your key. Turn your key to position two after pressing and holding the trip meter reset button on the dashboard. Hold the odometer button down for a further ten seconds. The light should then begin to flash and potentially beep before turning off.

What does the maintenance needed light on a Toyota Highlander from 2006 mean?

Toyota Maintenance Required Light: This light illuminates to notify you that your oil needs to be changed. 5,000 miles after the last reset, it turns on.

This light only turns on as a result of those miles; it has no means of knowing if your oil has been changed or not since then, and it never, ever indicates a problem.

When changing the oil, shops occasionally forget to reset the maintenance-required meter if the light isn’t yet on. Simply said, many quick-lube businesses are unable to reset it.

Resetting the maintenance needed light is simple. On most Toyotas, you can just:

  • Next, check to see if the odometer reading is visible. (On some models, the trip-meter is included.) “A that you desire to be visible.)
  • Back off the key after that.
  • Now press and hold the trip meter reset button. (Same button as for switching between the trip meters and the odometer.)
  • A key is turned to the on position.
  • Turn the key back to the “on position, but not all the way to the “start position, while keeping the reset button down. There should be a string of dashes on the odometer display that gradually vanish. A string of zeros will appear after they have all vanished. Hold the reset button down while waiting for the trip meter’s (or the odometer’s) zeros to disappear “A) Reading comes back.

The car should now be counting down to the next 5,000 interval, at which point the maintenance-required signal will turn back on.

When I turn on my automobile, why does the maintenance required light flash?

If you’re unsure of what a warning light on your dashboard indicates, it can make you feel uneasy. Thankfully, you normally don’t need to worry about it.

A flashing maintenance light is typically your car’s method of telling you that it needs to be serviced soon. The light’s purpose is to alert drivers when it might be time for an oil change or a tune-up by turning on at predetermined intervals.

You have roughly 500 miles left before you need to have your automobile serviced when the light first starts flashing. Your maintenance light will inform you by turning on and staying on when it’s due for service.

Download Jerry, the super insurance expert app, to find the answers to all of your maintenance-related concerns.

Jerry is a powerful tool for finding vehicle insurance discounts, and it can do so in just 45 seconds! Jerry will evaluate prices from the leading insurance companies in the country to get you the cheapest offers, and if you decide to transfer, he can even cancel your current policy!