Why Is My Nissan Key Fob Not Working?

Even if the battery in your Nissan fob is still good, there may be times when the car doesn’t recognize it. The battery is usually either dead or low, but your Nissan’s remote key functions could not be working properly. Reach out to our service department and we’ll be pleased to help if changing the battery doesn’t work.


Imagine that after replacing the Nissan key fob’s battery, it abruptly ceased functioning.

This is because your key needs to be reset and reprogrammed to function with the car. Although this is the most typical cause, other possibilities include broken key fobs and problems with your car.

You can perform the programming yourself onboard older models of vehicles. To get this done, however, you might need to go to your locksmith or the dealership if the vehicle is keyless.

You can quickly and easily replace the battery in your key fob at home if it recently died and you need to.

It is that simple, but if you seek professional assistance, the cost to replace it could reach $50.

Understanding your key fob is simple, and by handling it yourself rather than having a professional do it, you can save hundreds of dollars.

Battery for a key fob

Failure of the battery is one of the frequent reasons why a key fob stops functioning. There is no way to utilize it with a weak battery. Verify that the battery is the only issue. Change the outdated battery with a fresh one. Make absolutely certain that the battery in question is the one you have. To be certain, look up its specs in the owner’s manual.

Nissan Key Fob Not Working After Battery Change: Causes and Solutions

Many Nissan automobile owners continue to report that their key fob stopped working after changing the battery. This occurs rather frequently, especially after changing the batteries in your automobile key fob. Modern automobile key fob technology is helpful to us, but there are times when it won’t function, which can be frustrating. It can’t be a battery issue as you just replaced the key fob batteries.

The fact that the key fob automatically resets after a battery change is one of the primary causes of your car key not functioning after a battery change. Other potential explanations for this problem include a broken key fob, a broken ignition cylinder, or a defective car door circuit.


After changing the batteries in a key, there is typically no need for any re-programming. Just make sure you have a high-quality battery that is the right type and is oriented correctly. The type of battery (CR2032) and battery orientation (which side goes on top/bottom) are also marked within the key after it is opened.

You might not get a response because this is an old thread, and you might be restarting an old thread. Consider starting a new thread, please.

Why does my Nissan claim that my key ID is wrong?

Although automotive technology is constantly evolving, there are still issues with this cutting-edge technology. Nissan owners may have encountered a problem where their car reports that the key ID is wrong. What’s the deal with this? We have answers for you after doing study on this issue.

The key ID on your keys not being recognized by a Nissan can be attributed to three primary factors:

  • The key fob’s batteries might be dead. By changing the battery, you can resolve this.
  • The key fob can sustain damage. You might need to change the key fob as a result of this.
  • Perhaps the key fob hasn’t been connected to the car yet. If necessary, you can program the key fob yourself.

Don’t worry if you still have some concerns about resolving this problem. This post will examine the key ID error message that your Nissan is reporting as well as your options for fixing it. We’ll also look into other relevant issues, such how to reset a Nissan key fob. Read on to discover more.

Let us first state that we hope you find the links provided here beneficial before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!

My Nissan key fob needs to be reset.

Reprogramming Nissan Intelligent Key Fob Do not turn the car on after inserting the key. Take the key out and carry out this action around six more times. Remember that success might not come for up to ten attempts. When the Nissan Intelligent Key is accepted by the vehicle, the hazard lights will flash twice.

Why is my key fob unable to unlock my car?

It can be quite aggravating and even hazardous if your key fob won’t open the door to your car, especially if you have a young child or pet locked inside. Here are a few explanations for why your smart or remote key fob isn’t opening the door, along with solutions.

Any of the following could be the source of your issue if nothing happens when you push the unlock button on your remote control or key fob:

Your remote control or smart key fob’s battery is either dead or too low to maintain a strong signal. Replace the battery by opening the fob.

Your vehicle’s receiver(s) for the keyless entry system may not be receiving the signal from the key fob. When pressing the unlock button, try holding the fob close to the door handle. If it opens the door, there might be an issue with the key fob’s battery, the keyless entry antenna, or the wiring.

The unlock button on the key fob itself can be problematic. Try the panic, trunk release, and lock buttons. If the other buttons function properly, a faulty unlock button is the issue. You’ll require a fresh key fob (which will have to be programmed to your vehicle). The fob may be damaged, the keyless entry antenna, or the wiring may be at fault if none of the other buttons function after you have tried a new battery in the fob.

Your key fob’s entry code is missing. Every time you use the key fob to unlock or start your car, the rolling code that many automobiles employ changes. It can be necessary to have the fob reprogrammed by a car dealer if a communication error has corrupted the coding inside.

The electric door locks might be broken. The power door locks could not be able to unlock due to a problem with the wiring or control circuitry or even a blown fuse. To find the defect, the electrical system will need to be further diagnosed.

Your car’s battery is nearly dead or very low. Before the power doors may unlock, the car battery may need to be changed or given a jump start. Of course, you won’t be able to open the hood until you find another way to enter the car.

What caused my key fob to malfunction so suddenly?

The most frequent cause of a keyless entry system failing to send signals is a faulty battery in the key fob. Use the extra key fob to unlock the car and turn on the ignition if one is available.

Use the key that is included in the spare fob if it is not available to unlock the door. Check your owner’s manual for information on how to start your automobile when the key fob malfunctions.

Why won’t my key fob operate now that the battery has been changed?

A dead battery is the most frequent cause of a key fob not functioning. Having said that, your keyfob might be having more serious issues. You might require a key fob replacement or perhaps auto door lock repair if your key fob stops operating after a battery change.

Can my Nissan be started without a key fob?

However, if the Nissan key fob battery alone needs to be replaced, your Nissan might still start even with a dead key fob battery: Put the key fob in the port if your Nissan car, truck, or SUV has one, then push the START/STOP button while tapping the clutch or brake pedal.

How is a Nissan key fob push-button start reprogrammed?

Any button on your keychain fob should be pressed and held until the door locks start to flash. It ought to take three seconds or so. Release your programming button as soon as the lock lights stop flashing. A continuous light that indicates that the key fob has been programmed should then appear.

Can a Nissan key fob be reprogrammed to work with another vehicle?

I was wondering whether it was feasible to reset or overwrite that key fob to my vehicle because I have a used remote control with the same button configurations (including remote start). I presently only have one remote that is set up for the automobile.

I’m here. As long as the key is the same for each vehicle, you can reprogram a key fob to work with that vehicle. In this situation, if the key can open the doors, you would need to take the following actions:

  • The key fob’s battery should be removed and then replaced (unless you put in a new battery)
  • After unplugging the vehicle’s battery wires, wait 30 seconds, then reconnect them (reset computer).
  • Turn the key to the aONa position after inserting it in the ignition.
  • The key should be in the aOFFa position.
  • Using both your hand and the remote control, lock the door after turning the key to the aONa position.
  • While simultaneously using the remote and your hand to unlock the door, turn the key to the aONa position.
  • Remove the ignition switch’s key.
  • the driver door with the key.
  • Push the lock and unlock buttons on the key fob simultaneously with locking and unlocking the door with the key – (do this 3 times).
  • Try using the remote to unlock the doors while the door is closed after taking the key out of the lock.
  • Put the key in the ignition switch and attempt to start the engine if the doors will lock.

After completing these procedures, the key fob has been successfully reprogrammed to your car if the engine starts. If the key does not lock the doors or start the engine, it may be completely different, and you will need to get a new key. Seek out a specialist, like one from Your Mechanic, if you require more help with your keyless entry system.

The informative nature of the aforementioned claims warrants independent verification. kindly visit our

How can I tell if my key fob is defective?

In most cases, a key fob that is fully functional can open a car’s doors with a single click. The battery is likely worn out and has to be changed if it starts to require more effort to open the car’s doors. The majority of keyless remote fob batteries are available in hardware stores, including big box stores like Target, Walmart, and others. Since remote controls are sometimes offered in pairs, it is advisable to change the batteries in every remote at once.

Can AutoZone repair key fobs?

AutoZone does offer key duplication services for cars made by Toyota, Ford, Honda, Dodge, GMC, Mercedes, Kia, and other manufacturers. These services include key duplication, transponder keys, key fobs, and vehicle key blanks.

Why won’t my automobile accept my key?

The key fob won’t be recognized by your car because the remote’s battery is dead. The actual remote is damaged or is no longer programmed to your vehicle. Low automobile battery voltage. The keyless entry system is broken.