If you’ve recently added a radio, new vehicle seats, or other electrical components in your Nissan Maxima, the airbag light might be blinking. Your automobile believes there is a problem with the airbag deployment system, which is why your airbag light is flashing.
In This Article...
First, the clock spring needs to be replaced.
The airbag clock spring’s primary job is to keep the electrical wiring and the driver’s airbag in sync by entwining in and out in relation to the steering wheel.
The airbag on the driver’s seat may send a Soft-code error to the airbag control module as a result of the thin circuit bands becoming worn or brittle. This may cause the airbag light to begin blinking. The circuit bands’ typical use is the cause of their deterioration.
Without the aid of a good OBD2 scan tool that helps identify the issue, it is impossible to diagnose the clock spring issue on your own. Even if you are certain that your clock spring is broken, we advise having it replaced by a professional.
If you replace parts of an airbag system on your own without taking the proper safety precautions, serious injury could result.
Step 4
After 5 seconds, repeat step 1 again. Three times should be put into this. At this time, the status light can be blinking in a different way. Just stick to the same easy instructions. Turn the ignition to ON after inserting the key. Blinking should begin after the light has stopped, and the key should be swiftly turned to the OFF position and removed. Repeat this procedure a total of twice.
Blinking airbag indicator?
A light on your instrument cluster turning on, or worse, continuing to blink, is one of the most annoying things that may happen. Please allow me to explain what you can do to disable the airbag light if you are having this issue personally.
It’s crucial to first understand why your car’s airbag light initially illuminated. There are several causes. It can indicate that your battery backup is dead, that your airbag clock spring is broken, or that the SRS airbag control module is malfunctioning. It might potentially indicate a problem with your impact sensors or seat belts. Whatever the cause of the airbag light may be, the major concern you should have is that unless the problem is resolved, your airbags won’t deploy in subsequent collisions. This implies that every time you get in your car to drive, you put yourself at risk for harm or perhaps death.
Airbag Clock Spring that is worn out
The spring fulfills its task of preserving continuity between the electrical wire and airbag in the driver’s seat. It features some delicate circuit bands that could get frayed or brittle over time, resulting in the bag sending a soft-code fault report to the airbag control module and a flashing light as a result.
You must take it to the repair shop in this situation to get the spring replaced.
How can I stop the flashing of my airbag light?
The airbag light connects the seat belt system and the airbag system as part of the Supplement Restraint System (SRS) in automobiles (and vice-versa). When you turn on your automobile, the airbag light comes on for around seven seconds before going out, signifying that the internal system check was successful and finished. When the airbag light either never turns on or stays on while blinking, an issue exists. The airbag light needs to be reset at this stage.
Examining seat belt components, fixing bad clock springs, and replacing faulty sensors are a few techniques for turning off an airbag light. New bulbs or a fully charged battery are other options. While most repairs can be done without a professional, others may.
The following 10 steps will reset your airbag light:
- Turn on and off your ignition.
- Test drive your car when it has been restarted.
- Check the airbag switch for the passenger.
- Check to see if the seat belts are in place and functioning properly.
- Check to see if the passenger seat sensor is off.
- Use a scanner with the ability to reset the SRS or airbag light.
- Fix the broken airbag sensors.
- Replace or repair a broken clock spring.
- Check to see if the airbag is working properly.
- seek for a specialist’s help.
Although not exhaustive, the list above includes tried-and-true methods for tackling the problem. Some of them might not apply to your vehicle because compatibility is always based on the year, make, and model. It is recommended that you have your service manual on hand when carrying out any of these fixes. Always follow the manufacturer’s recommendations, too. Let’s get started on resetting your airbag light right away.
Why did my airbag light turn on overnight?
When this light illuminates, a system issue has been found, and one or more airbags may not deploy in the event of a collision. Even while it’s feasible for all airbags to function as intended even with an SRS warning light, an airbag malfunction is a serious safety risk.
On a Nissan, how do you reset the airbag light?
- Alternately turning the ignition on and off.
- Air Bag warning lamp illuminates for 7 seconds before turning off, and ignition switch is turned OFF 1 second later.
- Wait for more than three seconds after turning off the ignition switch.
- Follow steps 1 through 3 twice.
- Activate the ignition switch.
- The SRS lamp has been turned back on.
On a Nissan Patrol, how do you turn off the airbag light?
I recently owned a Patrol with an airbag light that was flashing. Although I don’t have a diagnostic to reset it, I found a procedure online that worked flawlessly.
It was tried on Anthony’s Patrol and it worked there as well, therefore it is compatible with GU 4.5 and 4.2D.
1) Open the door on the driver’s side.
2) Insert the key into the ignition and turn it to the ON position, but do not start the car.
3) Push the driver’s side door switch button at least five times within seven seconds of turning the key to the ON position. (Yes, the little switch, the one that turns on your interior light when you open the door.)
4) The Air Bag light should turn solid. After at least 7 seconds, it should start to blink in a rhythm of 3 seconds on, 2 seconds off.
5) Turn the ignition off and take the key out.
6) After starting the car, wait for the Air Bag light to go off to make sure it worked.
Can I drive when my airbag light is flashing?
The spring is intended to preserve continuity between the wiring and the driver’s airbag and coils throughout your steering wheel. The spring may wear out and fail over time, turning on the airbag warning light. Older autos are more likely to have this flaw.
The important line is that you must stop driving as soon as your airbag light illuminates and have your automobile inspected by a repair as soon as possible. Your airbags won’t activate until the issue is identified and remedied. Never disregard your airbag light since your safety and the safety of your passengers are top priorities.
Dashboard Warning Lights Explained, which offers guidance on a variety of lights and their meanings, is a good resource if you want to learn what additional warning lights represent and what to do when they illuminate.
Can an airbag light be caused by a low battery?
The backup battery is dead. It is the most frequent cause of an airbag light that won’t go off. It might take place if your car’s battery is running low or has been depleted for any other cause. When the battery is fully recharged, the issue will be resolved.
How is a Nissan airbag code read?
To read the codes, count the flashes the light makes, then count them again after the pause. For instance, two flashes, a pause, and four flashes indicate a code 24 issue with your airbag system. Code 12 indicates low battery voltage, while Code 13 indicates a shorted or grounded airbag circuit.
Can a blown fuse turn on the airbag light?
The car could have blown a fuse, for example. There are other fuses that could be to blame, but fuse #13 is most likely the one. You probably need to change fuse #13 and perhaps other fuses if your airbag light is on and your rear windshield wiper is not working. The airbag light can undoubtedly turn on as a result of blown fuses.
The airbag light may also abruptly turn on in a number of other situations. A mechanic or auto parts store should be able to decipher the code that the airbag system emits when it is acting up, which will give them a hint as to what specific issue the airbag is experiencing. There are numerous potential issues with the airbag because it is a complicated system of sensors, wiring, and programming that must suddenly activate during an accident after lying dormant for years. Check the fuse box to see whether you have a blown fuse first, but if not, you’ll likely need to take it to the dealer or a qualified mechanic for service.
Are Nissan airbags subject to a recall?
The reason for the Nissan airbag recall is that the airbag’s inflator may react dangerously and explosively to moisture, heat, and aging in the environment. These airbags are extremely harmful and should be replaced as soon as possible in any vehicle that has them. Drivers shouldn’t seek other autos and buy any car with Takata airbags.
Nissan airbag recalls are the outcome of ongoing airbag defect investigations and enforcement following multiple injuries and even fatalities. In relation to this specific recall, the National Highway Traffic Safety Administration is now looking into more than 30 million automobiles.
Our online Nissan Recall Lookup tool can be useful if you need to replace your airbags or are unsure if your car has Takata airbags. You can use it to find out if this recall affects your car.
Speak to the knowledgeable mechanics at our service center if you want to upgrade anything in your car, including your airbags. They will look after you and ensure that you are driving a safe vehicle because they are experienced with the necessary part replacements for your vehicle. They are informed on all varieties of auto maintenance, auto repair, and our Nissan service discounts.
What does it cost to repair the airbag light?
Reset Airbag Light, at No. 1 Although it typically costs a few hundred dollars and takes several hours, depending on the type of automobile it might cost as much as $600.
How can an airbag malfunction be detected?
Your automobile will alert you by turning on or flashing the dashboard or computer display airbag warning light. This light indicates that your airbags are deactivated while it is on. It implies that if you have an accident, they won’t deploy correctly.
How is an airbag sensor tested?
Although testing an airbag sensor is possible, it is not advised. Using an automotive diagnostic tool to retrieve the error codes and real-time data from the airbag control unit is the only safe way to test an airbag sensor.
What location do the airbag sensors have?
There are seven locations where sensors are mounted: on the radiator, engine case, back of the front headlight, firewall, airbag electronic control unit box, gearbox case, and B-Pillar. 40% of the car collisions with the stiff barrier were frontal.
What is the lifespan of an airbag?
The airbag, however, is a sealed unit that is not exposed to the environment, normal wear and tear, or other conditions that can shorten the lifespan of other parts. In the industry, it is generally accepted that airbags are safe for 10-15 years.