What Size Tires Are On A 2008 Nissan Altima?

Tire size for the Coupe 2.5 S, Sedan 2.5, Sedan 2.5 S, Sedan 3.5 SL, and Sedan Hybrid models of the 2008 Nissan Altima is 215/60R16. Both the Coupe 3.5 SE and the Sedan 3.5 SE have 215/55R17 tires. The Altima’s front and rear 215/55R17 tires should be inflated to 33 psi, while the front and rear 215/60R16 tires should be inflated to 32 to 33 psi. The car features wheels that are 7 to 7.5 inches wide and 16 to 17 inches in diameter. The vehicle features a 5×114.3mm bolt pattern and an M12 X 1.25 thread size. Lug nuts are used as the wheel fasteners, and the center bore of the vehicle is 66.1 mm.

The 2008 Nissan Altima comes standard with 16-inch wheels. The 2008 Nissan Altima’s tire size is P215/60R16. The 2008 Nissan Altima’s recommended tire pressure is 32 psi.

Size, Simplified: 215-60-16

Your 2008 Nissan Altima’s original tire size is P215/60R16 94T. Below is a color-coded description of the tire size for the 2008 Nissan Altima.

The tire size was made to accommodate wheels or rims with a 16-inch diameter.

With a load index of 94, this tire can support a load that weighs no more than 1474 pounds (670 kg). A greater number indicates that the tire can support more weight. Lower values indicate the reverse.

This figure indicates that the aspect ratio of your tire is 60%. In other words, 60% of the width is represented by the sidewall height of your tire, measured from the rim’s edge to the tread. The sidewall height in this instance comes out to be 129 millimeters.

This letter indicates the design of your tire. About 99% of all tires sold today are made using the traditional manufacturing type, radial.

The highest speed that may be maintained for 10 minutes on this tire is 118 mph (190 km/h), according to its speed rating of T. A faster pace becomes risky.

The 2009 Nissan Altima’s tire size.

Depending on your Altima’s year, model, and trim level, the most popular tire sizes are 215/60R16 tires, 215/55R17 tires, 235/45R18 tires, and 235/40R19 tires.

What size tires can be put on a Nissan Altima?

Size of Tires The Nissan Altima provides three alternative tire sizes: the base P215/60HR16, the optional P215/55VR17, and the optional P235/40VR19. In addition, the tire measurements appear to be a mysterious puzzle that you must solve.

What is the Nissan Altima’s bolt pattern for 2008?

The bolt pattern of a 2008 Nissan Altima Coupe 2.5 S is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.

You should measure from the center of one lug to the outer edge of the lug farthest from it in order to obtain an accurate measurement of your five lug bolt pattern without the use of a bolt pattern tool.

The Nissan Altima from 2009 has how many lug nuts?

16 nuts, 4 locks, and 1 key are included in the Dorman – Autograde – Wheel Lug Nut & Lock Set: M12-1.25 Thread, Conical 60, Acorn, 32.46 mm L, Black Chrome (Part No.

On a 2008 Nissan Altima, how do you reset the low tire pressure indicator?

When the tire pressure light blinks three times, release pressure on the TPMS reset button. Start the car and let it run for 20 minutes to let the sensor reset. Typically, the tire pressure monitor reset button sits under the steering wheel.

Why does my Nissan Altima’s tire pressure light come on?

A leaking tire, a wheel that can no longer retain air, or a malfunctioning tire pressure monitoring system are the three most frequent causes of a Nissan Altima tire pressure warning light remaining on.

What is a bolt pattern for a Nissan Altima?

We’ve written in-depth articles about the Nissan Altima and answered a lot of your questions about it. We’ll discuss the knowledge you need to have in order to choose the ideal replacement tires or rims for your Nissan today. We’ll focus on the bolt pattern for each generation in particular. Let’s begin with a brief response:

Before 2001, the Nissan Altima’s bolt pattern was 4×4.5 inches (4×114.3mm), while starting in that year, it was 5×4.5 inches (5×114.3mm). They also have a center diameter of 2.6 inches (66.1 mm) and four or five M12 x 1.25 threaded lug nuts that require 83 lb-ft of torque to tighten.

That, however, hardly captures the entire picture. For each iteration, we’ve provided a more thorough description of the bolt pattern below. We also go through the individual lugs/bolts used, the center bore hub’s exact diameter, and the bolt torque requirements. Additionally, we have details on the precise tire and rim sizes for each engine type. You should be well aware of what you can and cannot purchase in this manner. Read on!

How can you tell which wheels fit your car?

The two simplest methods are to look at your car’s sticker plate, which should be inside the driver-side door, or to search online for the precise make and model of your car’s characteristics. That should indicate the typical rim size.

Why are my tires in good condition but my tire pressure sign is on?

It’s likely that one or more of your tires have low air pressure if you see the tire pressure indicator turn on. However, even if your tires are in good condition, there are a number of things that could cause the sensors to go off, so you shouldn’t rely only on the data from the tire pressure monitoring system of your car.

What is a wheel’s offset?

The distance between a wheel’s hub mounting surface and its center plane is known as the wheel offset. Positive offset indicates that the hub-mounting surface is situated nearer to the outside of the wheel. In contrast, a negative offset indicates that the object is moving inboard. If the mounting surface and the center plane of the wheel are parallel, then the offset is equal to zero. In other words, the lateral, or side to side, position of the wheel is determined by offset. The offset must be carefully chosen together with the new width as wheel widths vary to ensure that the wheel and tire have enough room inside the wheelwell to prevent friction or unwelcome contact with other parts.

Numerous wheel fitment problems can be resolved with the help of an understanding of wheel offset. Upsizing of wheels and tires frequently calls for different offsets. The handling of the car may suffer if the wheel offset is incorrect for the vehicle.

Don’t worry; Town Fair Tires’ comprehensive database enables our sales experts to recommend tires that are the ideal fit for your car.

A 5×114-3 bolt pattern is what?

The stud count (five) and bolt circle measurement (114.3), the notional circle determined by the studs’ centers, make up the 5×114.3 Bolt Pattern or Pitch Circle Diameter (PCD).

Why, after filling the tires, is the tire pressure light still on?

If you’ve inflated your tires, but the air pressure warning light continues to flash, your tire pressure monitoring system is malfunctioning or you have a gradual leak. A bright TPMS warning light indicates a problem with a tire pressure sensor, assuming there isn’t a leak in your tire. One of them might be damaged, the lithium-ion battery might be dead, or the TPMS itself might have an internal problem. You’ll need to get your Tire Pressure Monitoring System repaired in any of these scenarios.

Quick Tip: Recheck the tire to ensure it is inflated to the correct air pressure if the TPMS warning light illuminates again after you have inflated it. Low tire pressure indicates an air leak, which requires repair or tire replacement.