Why Does My Honda Civic Say Check Brake System?

You will also notice a light that reads “check brake system” if the electronic parking brake has jammed. It will be exceedingly challenging for you to press down on your pedal. Sometimes the culprit behind the warning’s activation is a dead battery.

What does “check brake system” imply on your car’s dashboard?

The brake pad wear indication light is the newest member of the family of brake warning lights. This feature is common in late-model automobiles. If your car is equipped with this indicator, it will notify you when it’s time to change your brake pads. When you press on the brake pedal, friction material from the brake pads snags the rotors. Over time, that friction substance deteriorates. When your brake pads are getting close to their minimum thickness, tiny sensors recognize it and turn on the dash light to alert you that it’s time for brake maintenance.

Make careful to get servicing as soon as possible if you spot any of these brake system warning lights on your dashboard. Even if they are probably not urgent, a parking brake and a brake pad wear indication light should be checked. On the other hand, a BRAKE light or an ABS warning light both indicate a potential issue with your brakes and need to be fixed right away.

What does a Honda Civic’s brake system mean?

Stop System

This light indicates a problem with your brakes if you see it. Either the brake fluid level is low or there may be an issue with the antilock brake system. ESP/Traction Control This signal indicates that the electronic stability system of your car is in operation.

What should you do if your Honda Civic’s brake system warning light illuminates?

Have a dealer look out your car right away. The electronic parking brake system is malfunctioning if the indicator blinks or illuminates at the same time as the amber brake system indication. Avoid using the parking brake, and have a dealer inspect your car right away.

How can I reset the Honda Civic’s electronic parking brake?

The automatic brake-hold feature lessens the stress of driving in stop-and-go traffic, while the electric parking brake offers a higher level of sophistication and simplicity when using the parking brake.

The Aspect:

  • Owners of the CR-V can set the parking brake by lifting the electronic parking brake switch and depressing the switch to release the parking brake in place of the conventional hand lever or foot pedal.
  • The automatic brake hold, when engaged, keeps the brakes applied when the driver does, as in stop-and-go traffic, and releases the brakes when the driver depresses the accelerator.

Important information

When the ignition is turned off, the CR-electric V’s parking brake can be configured to automatically engage. Here is how to accomplish it:

  • Make sure the brake pedal is not depressed when the ignition is on and the shift lever is in the PARK position.
  • Once you hear a beeping sound, pull up and hold the parking-brake switch before releasing it.
  • Pull up and hold the switch once more in 3 seconds; after two beeps, let go of the switch.
  • Now, the parking brake is programmed to apply itself anytime the ignition is turned off.
  • To engage the parking brake, raise your foot and release the switch.
  • Repeat the steps above to permanently stop the feature; a single beep will sound at the conclusion to indicate that it has been done so.

You will need to temporarily deactivate the automatic parking-brake feature when using a conveyor-style vehicle wash. How to do it:

  • Within two seconds of turning off the engine, depress the parking brake switch.
  • When the car is restarted, the automatic activation will resume after being suspended.
  • Use the brake pedal to halt the car, then select NEUTRAL.

An Engaged Parking Brake

The parking brake sensor will signal the brake warning light to switch on if the parking brake is still engaged. The parking brake on your car should be entirely disengaged to prevent this from happening in most cases.

If you keep it the way it is, you’ll be using your parking brakes all the time, which can cause your brakes to overheat and hasten the wear of your brake shoes and brake pads.

The efficiency of your braking system may be impacted by the accelerated brake fluid deterioration brought on by these elevated temperatures.

Low Brake Fluid Levels

The amount of braking fluid in the system is monitored by a sensor in the brake master cylinder. The sensor will cause the brake light to illuminate if levels are below the minimal threshold.

Low brake fluid levels can be very concerning because they may be a sign of an urgent brake fluid leak.

Worn Out Brake Pads

As the caliper pistons must extend further to make contact with the rotor, worn brake pads might also result in a drop in brake fluid level, which can also activate your brake warning light.

This sensor wire makes contact with the rotor when the brake pads get too worn, which prompts the brake light (also known as the brake pad warning light) to turn on.

Anti Lock Braking System Malfunction

A brake warning light for the antilock braking system (ABS) is present in the majority of automobiles.

Both the brake warning light and the ABS light (if it has one) may turn on in response to issues with the antilock brake system. Electrical problems and even something as simple as a dirty wheel speed sensor can be the culprits.

When the brake system warning light illuminates, what should you do?

If both of these warning lights begin to flash at the same time, there is only one thing to do. As soon as you can, stop the car safely, then dial your breakdown service. If you have both brake and ABS warning lights on, it may indicate a serious problem with your brakes. You will put both your own safety and that of other road users at risk if you keep driving.

While it’s crucial to stop as quickly as you can, keep in mind that your brakes might not be in good condition. Keep your cool and make an effort to slow down gradually. Be careful not to apply the brakes suddenly or forcefully. You shouldn’t use the vehicle again until the problem has been resolved.

What does the Honda braking system light mean?

The brake system in your Honda car keeps an eye on the brakes and brake fluid, as the name suggests. If this warning light illuminates, there may be a problem with the brake system or insufficient brake fluid.

How can the brake fluid in a Honda Civic be checked?

Steps For Brake Fluid Inspection

  • Under the hood, locate the brake fluid reservoir on the master cylinder. In case you can’t find it, look in the owner’s manual.
  • Find the lowest and maximum lines to determine the level of your brake fluid.
  • Before you close the hood, check the brake fluid’s color.

On a Honda Civic, how do you turn off the brake light?

Small components can occasionally have a major impact on our autos. The little object you discovered is a brake pedal switch bumper, and it prevents the brake light circuit from activating until the brake pedal is depressed. Your brake lights will always be on without it.

Fortunately, you can switch off the brake lights on your Honda Civic by following these instructions:

  • Until it feels secure, press down firmly on the brake pedal switch bumper.
  • One hand should be used to depress the brake pedal.
  • Now, your brake lights ought to go out.
  • In the hole, insert your new brake pedal switch bumper.
  • Look around with your other hand for a tiny hole in the back of your brake pedal.
  • Now park your car somewhere secure and start the engine, but make sure the handbrake is engaged.
  • Start by getting a new part from your neighborhood auto shop. It ought to be cheaper than $5.
  • When it is in the proper position, release the brake and let the bumper do its work.

Hopefully, these procedures assisted you in identifying and resolving your brake light issue. However, if your brake lights are still giving you trouble, take your automobile to a mechanic for an expert evaluation.

Take a moment to compare auto insurance rates with Jerry while you wait for the mechanic to diagnose the issue. The Jerry app, a licensed broker, will assist you with free tailored price comparisons from more than 50 leading companies, including Allstate and Nationwide. When you discover a cheaper rate, Jerry can even assist you in switching policies and canceling your old one!

I have a brake pad warning light on. Can I drive?

Driving is safe when this light is on for a brief period of time. As was already indicated, when you still have some brake pad material remaining, the light will turn on. However, if you wait too long and keep driving, you will run out of material and harm the rotors. Waiting too long is harmful and raises the likelihood of being involved in an accident since the brakes won’t stop the car as quickly without any pad material.

As always, if you have any problems with your brakes or wear indicators, our qualified specialists are here to help.

When the brake light is on, can you drive?

When you start your car, if the brake warning light illuminates and stays on, do not drive. Turn off your vehicle, then look for potential reasons of the problem (we will get to those soon).

Do not become alarmed if the brake warning light illuminates while you are driving or in traffic. There are multiple hydraulic braking systems in your car. So, even though it could take a little longer than usual to stop completely, pull over securely and arrange to have your car towed to your house or to a reputable technician for an inspection.

Once more, it’s crucial to avoid continuing to drive while the brake light is on as this could further harm your braking system and be quite dangerous.

*Pro Tip: All of the dashboard lights should come on when you switch on your car. If one or more of them are not turning on, there might be an issue with that particular indicator.

What does the red warning light on the brake mean?

The amber/yellow brake warning lamp and the red brake warning lamp have different functions. When there is a hydraulic issue, such as low brake fluid or a loss of hydraulic pressure in one of the brake circuits, the red (RBWL) lamp will illuminate. If the parking brake is applied or shorted to the ground, it also glows.

If the brake fluid level is low, it lights. Low fluid level is frequently a sign that the brake pads need to be replaced since they are worn out. Brake fluid accumulates in the space behind the caliper’s piston when the brake pads deteriorate. Before adding fluid to the reservoir, it is crucial to inspect the system for leaks.

My electric parking brake has to be reset.

This is how to reset it:

  • Place the gear lever in PARK and turn the ignition to the ON position.
  • The EPB button must be pulled and then released to engage the electric parking brake.
  • When you hear a mechanical sound, pull and hold the EPB button for a few seconds before letting go.