The Nissan Altima provides three distinct tire sizes: the basic P215/60HR16, the optional P215/55VR17, and the optional P235/40VR19. Not only do the tire measures appear like a mysterious puzzle you must solve. And to make it even more difficult to choose which tire size is best for your trim level.
However, you’ll discover that reading tire sizes is simple once you understand how to dissect each element of the Nissan Altima tire size data.
In This Article...
What size tire can I put on a Nissan Altima?
Size of Tires The Nissan Altima provides three alternative tire sizes: the base P215/60HR16, the optional P215/55VR17, and the optional P235/40VR19. In addition, the tire measurements appear to be a mysterious puzzle that you must solve.
How big are the wheels on a Nissan Altima?
How big are the wheels on a Nissan Altima? Depending on the model year and trim level of your Nissan Altima, a choice of rim diameters, including 16″, 17″, 18″, and 19″, are commonly available.
What tire pressure should a Nissan Altima have?
Are you concerned about your Nissan Altima’s tire pressure? Perhaps your low-pressure indicator lit up, but you are unsure of how much air your tires require. We looked into the matter, and the following is what we learned.
Tire pressure for your Nissan Altima should be 32 PSI. The majority of year models share the same number. Additionally, it is unaffected by the size of the tires.
You must understand how to check the levels now that you are aware of the recommended tire pressure. Continue reading to learn how to check the air in your tires, how often to check it, whether you can drive with low air pressure, and other topics.
Let us first state that we hope you find the links provided here beneficial before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!
Can Subaru wheels be used on a Nissan Altima?
The wheel will be further out the higher the offset, which is the opposite for a lower offset. The XV uses the same bolt pattern and offset as the Forester, which has been in use for more than 16 years, expanding your selection of wheels. A lot of owners replace the OEM wheels, so don’t rule out alloys for winter wheels. Another option for searching is Craigslist.
Additionally, I might advise changing your profile to add a more precise location in Canada, which will assist with future and current regional suggestions.
A 2006 Nissan Altima has what kind of bolt pattern?
The bolt pattern on the 2006 Nissan Altima 2.5 S is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
You should measure from the center of one lug to the outer edge of the lug farthest from it in order to obtain an accurate measurement of your five lug bolt pattern without the use of a bolt pattern tool.
What is the Nissan Altima’s bolt pattern for 2005?
The bolt pattern on the 2005 Nissan Altima 2.5 S is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
What is a bolt pattern for a Nissan Altima?
We’ve written in-depth articles about the Nissan Altima and answered a lot of your questions about it. We’ll discuss the knowledge you need to have in order to choose the ideal replacement tires or rims for your Nissan today. We’ll focus on the bolt pattern for each generation in particular. Let’s begin with a brief response:
Before 2001, the Nissan Altima’s bolt pattern was 4×4.5 inches (4×114.3mm), while starting in that year, it was 5×4.5 inches (5×114.3mm). They also have a center diameter of 2.6 inches (66.1 mm) and four or five M12 x 1.25 threaded lug nuts that require 83 lb-ft of torque to tighten.
That, however, hardly captures the entire picture. For each iteration, we’ve provided a more thorough description of the bolt pattern below. We also go through the individual lugs/bolts used, the center bore hub’s exact diameter, and the bolt torque requirements. Additionally, we have details on the precise tire and rim sizes for each engine type. You should be well aware of what you can and cannot purchase in this manner. Read on!
Why does tire size matter?
The sizes of motorcycle tires and automobile tires are often equivalent. The first three numerals indicate the millimeters of the tire’s width (mm). The aspect ratio, which is the height of the tire’s cross-section to its width, is represented by the next two numerals after the slash. The motorbike wheel’s diameter, measured in inches, is represented by the final two numerals following the dash.
How can you tell which wheels fit your car?
The two simplest methods are to look at your car’s sticker plate, which should be inside the driver-side door, or to search online for the precise make and model of your car’s characteristics. That should indicate the typical rim size.
What automobiles have a 5×115 bolt pattern?
Many fantastic cars, including Buicks, Cadillacs, Chevrolets, GMs, Chryslers, Dodges, Pontiacs, and more, come with wheels with a 5×115 bolt pattern. 5×115 wheels may enhance the appearance of any vehicle, whether you’re driving a polished ride that exudes high-end elegance or a traditional American muscle car.
Can wheels from one car be used on another?
Fortunately, any car has a replaceable rim available. All you need to do is make sure the new wheel’s bolt patterns, size, and offset match those on the old one.
By looking at the sticker label on the inside of the driver’s door or measuring the rim, you may determine the new wheel’s proper size. Take your car to a mechanic if you are not the do-it-yourself kind.
A 5×115 bolt pattern is what?
The stud count (five) and bolt circle measurement (115), the notional circle determined by the studs’ centers, make up the 5×115 Bolt Pattern or Pitch Circle Diameter (PCD).
What is a 5×114-3 fit?
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.
Are 114.3 and 115 equivalent?
There is a real difference between 114.3 and 115; rounding is not the only explanation. Since 1 inch is precisely 25.4 mm, 4.5 inches are precisely 114.3 mm.
Yes, they are quite close together. When I changed the rear axle bearings on my 1974 Cuda’s 4.5 inch or 114.3 mm bolt pattern, I did learn this. I was looking for anything to press against on the wheel end of the axle and thought, “Why not try these old rotors with a 115 mm bolt pattern off the back of my 2010 Charger?” It did a terrific job of pressing the bearings on, but after I hadn’t checked the specifications, I wondered if they were truly the same. However, if you put the rotor on the hub and pay great attention, you may observe that there is a small discrepancy. I wouldn’t switch out the wheels since, in my opinion, the acorn nuts wouldn’t fit snugly.
Since 4.5″ is 4.5″ after all, I did use Ford rims on our 1992 GC and the same ones on my 1995 Intrepid. The offset wasn’t precisely correct, but it worked and didn’t rub.
You might not get a response because this is an old thread, and you might be restarting an old thread. Consider starting a new thread, please.