Although replacing the key fob battery on your Nissan model is a simple procedure, it does require handling delicate and sensitive electronics. Make sure to use gloves to prevent harm to the key fob (latex or non-latex substitute). The CR2032 3V battery is used in the Nissan key fob. Typically, a multipack of them costs less than $5 USD. A tiny flathead screwdriver is also required.
- Nissan key fob flipped over to the rear
- Slide the little lever to release the emergency key.
- Delete the emergency key
- Find the open slot between the front and rear portions of the key fob on its top.
In This Article...
Nissan Altima keyless entry remotes require one CR2032 battery. Depending on the brand, size container, and type you choose, the majority of CR2032 batteries cost less than $4. When shopping for a new battery, you can bring your old one with you.
Usually, you don’t need to reprogram after changing the batteries in your remote key fob. The process for reprogramming a remote key fob is frequently explained in your vehicle’s owner’s manual.
Your 2013 Nissan Altima key fob’s battery can be changed by you. The case of the fob is the hardest portion to open. With our detailed instructions, it’s fairly simple.
Depending on the brand, the cost for dealer service to replace the battery in a remote key fob ranges from $30 to $500.
Nissan Altima key fob batteries should be replaced every three to four years, though this will vary depending on usage and manufacturing quality. Before it stops opening doors and causes you problems, you should update the batteries in your keyless entry remote if the signal strength has decreased.
The 2013 Nissan Altima will display a low-key battery indicator on the dashboard, require many clicks to unlock or lock the doors, and the key fob buttons won’t function if you haven’t changed the battery in more than four years.
What size battery is required by a Nissan key fob? And How To Modify It
Nowadays, a remote keyless entry device is standard on all new Nissan vehicles. With this method, you can start your car’s engine and unlock your door without really using a key. It’s convenient to have a Smart Key as Nissan does, but what happens if the battery dies? It can be difficult to choose the micro-battery size to buy for your Nissan intelligent key because there are so many different sizes available. Fortunately, we’ve looked into batteries and the replacement procedure to give you an answer here.
The CR2032 3-Volt battery is the same size for all Nissan Smart Keys. Use these instructions to replace the battery in your key fob:
- Press the tiny button on the rear of the fob to remove the valet key.
- Gently pry open the fob with a screwdriver or card until it clicks and separates into two halves.
- Replace the battery after removing the old one.
- Replace the valet key and put the key fob back together.
Here is a summary of Nissan Smart Key battery sizes and how to change them. However, there is more to understand about this procedure. We will go into more depth on how to change the battery in the following sections of this essay. We’ll also go over programming the Nissan key fob, how long the batteries should last, and whether or not they’re covered by a warranty.
Let us first state that we hope you find the links provided here beneficial before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!
Energizer CR2032 Nissan Key Fob Battery Replacement Kit for 2009 to 2017 Models
For many Nissan vehicles, this Nissan Key Fob Battery Replacement is the OEM alternative. For vehicle fitment, please refer to the list below. Replace the original battery from your key fob, keyless entry remote, or remote key with this Energizer CR2032 3v Lithium Battery. The highest quality components are used to create Energizer key fob battery replacements, giving you a battery that lasts forever. Make sure the old battery in your car’s remote key or key fob has a 2032 number. The battery number for your key fob, keyless entry remote, or remote key can typically be found on the back cover if it is not in your remote. The reason why Energizer key fob replacement batteries are superior to original equipment batteries is because manufacturers frequently employ lower-quality products or batteries to cut costs and entice you back into the service department where they can profit more from you, the customer.
All Energizer batteries have a long lifespan and are constructed using the best components available. The dependable power you have come to expect from major international brands like Energizer is provided by these specific application batteries. Since Energizer is the most popular battery among automotive car audio specialists, you can be confident that it is a battery you can rely on.
- 10 years of storage guarantee.
- superior lithium
- three levels of corrosion defense
- IEC: D2032
- 3.0 Volt
- Size: 2 x 20 x 20 (mm).
- 220 mAh
Which kind of battery is required for the Nissan Altima key fob?
The replacement battery itself is the only component you’ll need to have your key fob working properly once more:
Coin cell battery, 3 volts, part number CR2032
It may already be familiar to you as the tiny cell used to swap out a watch battery. You can easily find them at any hardware store in Reading, and they come from a variety of producers, including Panasonic, Sony, Energizer, Maxell, and Duracell.
To learn which battery is the original equipment used by the manufacturer, we advise consulting your user manual. Your 2014 Nissan Altima’s OEM battery, for instance, might be a Panasonic CR2032 3V coin cell. Bring your key fob to Rolls Auto Sales in Philadelphia if that information isn’t in your manual or if you have any issues; we’ll be pleased to assist you.
How much of a battery does my key fob require?
The fact that button cell batteries have an identifying number printed directly on the top is one practical feature. This number, which is often three to four digits long, will let you know what kind of battery you need. The CR2032 button cell is the one that’s most frequently found in key fobs. The following button cells are also frequently used: CR2450, CR2025, CR1616, and CR2016.
The type of battery that your fob requires may typically be found in your vehicle owner’s manual if, for any reason, you are unable to locate the number on your old battery. Alternately, you can visit your nearby Batteries Plus, where one of our specialists will assist you in identifying the best battery for your requirements.
How can you use a dead key fob to start a 2013 Nissan Altima?
This is how: Depress the little release button after turning the Nissan key fob around. From the key fob’s base, remove the concealed emergency key. To enter your Nissan, put the emergency key in the driver’s side door and open it.
How is my Nissan Altima key recharged?
My key fob isn’t reliably unlocking my car and looks to be running low on power. I wish I knew how to give it more juice, though! How should a Nissan car key be recharged?
In less than two minutes, find out if your auto insurance is being overcharged.
A small luxury that may improve the entire car-owning experience is a key fob that works smoothly. Nissan key fobs, however, cannot be recharged. Instead, you must swap out the battery.
Nissan key fobs typically use CR2025 button cell batteries, which are available for roughly $5 from retailers or dealers. To make sure you’re obtaining the correct model, check your owner’s handbook before you purchase a new battery.
The instructions for replacing the battery are as follows after you have the appropriate replacement:
- Take the extra metal key out of your fob. On the back of your key is a little slider that can be used to release this.
- Put a flathead screwdriver where the key was and twist to gently pop open the plastic shell.
- Pull the dead battery from its container using the screwdriver.
- Place a brand-new battery in it, negative side up.
- Change the housing and backup key.
You’ve now successfully changed the key fob’s battery! If the issue persists, get in touch with your local Nissan dealer and ask them to reset your key.
Jerry can help you save on auto insurance while you wait for them to fix your key. The Jerry app, a registered broker, will help you compare customised rates from more than 50 leading companies like Progressive and Nationwide for nothing. Jerry can assist you in purchasing your new coverage and even in canceling your old insurance when you discover a better option.
What is the price of a key fob battery?
These batteries typically cost $10 or less, however some fobs need two. Since it just takes a few seconds, battery specialists and dealers frequently replace the batteries for free.
How can I start my Nissan Altima key manually?
Kicking Off Your Nissan If your Nissan vehicle has a key fob port, you can insert the fob into the port and depress the clutch or brake pedal while pressing the START/STOP button. Simply step on the brake or clutch while pressing the key fob against the button if you don’t have a port.
What should I do if the battery in my Nissan key is low?
You can resume using the key fob to start and enter your car once the battery in your Nissan smart key is replaced. The steps to follow to change the battery in your key fob are as follows:
- When the battery died, you could still enter your Nissan by using the concealed key.
- Remove the old battery and the key casing.
- Place the negative side of the CR2025 battery upward before replacing it.
- Reassemble the key fob and give it a try!
Why does the battery in my Nissan key fob keep dying?
When our technology malfunctions, it is annoying. Frequently, it is as a result of a dead battery. There are a few typical causes of battery death. For instance, incorrect use or storage might cause a battery to deplete. It might also have simply reached the end of its life! Each battery is unique. Although your key FOB might be dead for this reason, it might also be dead for another cause, in which case you might need to get creative.
How long does the battery in a key fob last?
How Long Are Key Fobs Good For? The battery in your car’s fob or remote will eventually need to be replaced, just like any other battery. A car fob battery should typically last three to four years.
How long does a key fob’s CR2032 battery last?
A number of variables, such as material quality, storage conditions, time spent storing, humidity, physical damage, or temperature, can affect how long batteries can be stored. A battery should ideally be manufactured of high-quality materials, kept dry and climate-controlled, and free from physical harm. When correctly stored, lithium coin cell batteries from Energizer are said to have a shelf life of up to ten years. The application will have a big impact on the service life. Given that CR2032 batteries are used in automotive key fobs only seldom, they can survive up to 4-5 years before needing to be replaced. A more active device, like the brand-new Apple Air Tag, which enables ongoing object tracking, only has a one-year lifespan.
Why won’t my key fob function now that I replaced the battery in my car?
A dead battery is the most frequent cause of a key fob not functioning. Having said that, your keyfob might be having more serious issues. You might require a key fob replacement or perhaps auto door lock repair if your key fob stops operating after a battery change.