Belts don’t cost a much by themselves. Since many pieces must be removed in order to reach the belt, labor is where the true expense lies. Your best chance is to shop about and compare prices, but be prepared to pay anything between $409 and $919. (including parts and labor).
In This Article...
How do I tell if the timing belt in my Honda is damaged?
Your timing belt may be significantly damaged if you hear a ticking sound emanating from the engine of your car. Your car’s timing belt is connected to the crankshaft and camshaft of the engine through a number of pulleys. The connecting rods of the engine, which are connected to the pistons inside the combustion chamber, provide power. The rocker arm assembly and cylinder head valves are controlled by the camshaft, which delivers gasoline to the combustion chamber. The exhaust manifold is the next point of exit for the released gases. Your car’s timing belt may start to twitch inside the engine when it begins to wear out. This can potentially be a symptom of low oil pressure.
What occurs if a timing belt snaps?
Some engine parts can malfunction without causing significant harm. Without any issues, you can drive to your mechanic and get the part replaced. But with a timing belt, this is not the case. The camshaft will stop turning when the timing belt snaps, but the crankshaft will continue to rotate at 1000 revolutions per minute. Because of this, the pistons will keep rising and falling in their cylinders and, occasionally, may hit the valves. The pistons, valves, and cylinder heads will sustain damage when this occurs, and because to how quickly it occurs, the damage will be almost immediate.
It is crucial to pay close attention to your engine and make sure it is operating smoothly. Take your car to a repair right away if you begin to notice any of the aforementioned symptoms. It can be nothing, only require a quick correction, or indicate more serious issues that could develop into the dreaded timing belt failure while driving. Come to Professional Auto Repair’s shop and let us examine your timing belt and other parts to ensure that your car is working properly.
How long does it take to replace the timing belt on a Honda?
It does need some engine knowledge to replace a timing belt and water pump, so if you don’t have much expertise working under the hood, we advise leaving it to the experts. However, if you prefer making your own repairs and restorations, you can do it yourself and avoid paying hefty repair expenses in the process.
Starting with the tools you’ll need, we’ll walk you through the replacement of a timing belt and water pump step by step.
What You’ll Need to Replace the Water Pump and Timing Belt
- new antifreeze/coolant
- Wrench socket set
- jar or bucket (for collecting coolant)
- a fresh water pump
- tools for driving screws, such as Philips and slot drive
- bags made of plastic and a permanent marker (for labelling nuts, bolts and parts you remove from the engine)
- a fresh timing belt
- Set of Allen keys
- Tip-Ex, white chalk, and white paint (for marking the cogs for simpler reassembly)
- leather gloves
Step 1: Preparation
Get your car and work area ready first. Depending on your degree of experience, changing a timing belt and water pump can take anywhere from one to three hours, so make sure you have the time and space necessary. Before you begin, carry out the following:
- To stop the engine from spinning while you’re removing the timing belt, put the engine in drive and use the handbrake.
- Before starting, make sure the engine is entirely cool.
- Since coolant will spill out when you remove the water pump, place a bucket underneath it. To find the pump, see your car’s manual.
- To reach the undercarriage beneath the engine, jack up the front of the automobile.
- Prepare all of your tools, and have bags and a pen on available to name and store the engine parts you remove.
Step 2: Removing the Belts
You must first remove the fan belt and power steering belt because they are located next to the cover that protects the timing belt and water pump. To remove the belts, take the following actions:
- To access the timing case and crankshaft pulley, do the same with the power steering belt by moving it aside.
- The fasteners holding the alternator in place should be loosened. The fan belt can then be removed by lightly tapping it.
- Crankshaft pulley: Loosen. To access the engine and remove the bolt, you’ll need a long wrench arm.
How durable are timing belts in reality?
This is where all of the maintenance and replacement inconsistencies are found. According to various schedules, including data provided by the manufacturers, a timing belt typically has to be replaced after 7 to 10 years, or between 60,000 and 105,000 miles, whichever comes first.
How long does it take to change a timing belt?
Depending on the vehicle, it is a complex, time-consuming process that can take 48 hours. However, repairing the timing belt before it breaks will avoid engine damage and ultimately cost you less money. Visit Virginia Tire & Auto right away if you’re not sure whether your belt needs to be replaced.
When should a 2017 Honda Civic’s timing belt be changed?
Referring to Timing Belt Replacement Although they can last up to 100,000 miles, it’s always a good idea to change them before that. The valves, pistons, and other internal engine components can sustain significant damage in the event of a belt failure.
Does the timing belt provide alerts?
If you’re within the recommended mileage range, you should still get the timing belt replaced because it can malfunction with no warning and without any preceding symptoms. Having said that, occasionally your car will give you a hint that the belt is beginning to wear out. If you encounter any of the following, you ought to take the car to an accredited auto repair facility:
- clear exhaust. If the exhaust of your car begins to spew thick smoke, the fuel isn’t burning properly, potentially as a result of the valves not opening or closing in time.
- Engine vibrations that seem strange. The timing belt can disrupt the engine’s normal rhythm and cause vibration or shaking if it is stretched or missing teeth.
- hot-running, leaky engine. These aren’t the obvious signs of a faulty timing belt, but if the car is running hotter than it should or is dripping fluid, this might wear down the belt excessively and possibly lead to an early failure.
- start-up issues with the vehicle. There are several potential causes for this, but the ignition timing is frequently the culprit.
Avoid becoming one of the thousands whose engines need to be rebuilt because of a single little component. Save hundreds of dollars in auto repair expenses by replacing the timing belt in a timely manner. The Car Doctor offers professional auto repair, first-rate customer service, and budget-friendly prices in Mountain View and Palo Alto. Online special offers can help you save even more. Call them at (650) 492-6853 for a free estimate on timing belt replacement and other repairs or maintenance.
When the timing belt fails, can you still drive?
There are four additional indicators to be aware of that may indicate your timing belt is going to fail because it might be challenging to perform a visual inspection. You can avoid expensive repairs and an engine disaster by being aware of these warning indicators.
Engine Doesn’t Start
One of the numerous potential causes of your engine not starting is a faulty timing belt. If your car won’t start, you won’t be able to drive it, therefore you can’t exactly ignore this issue. However, if the timing belt snaps while you’re driving, you’ll undoubtedly notice it and your engine will very surely sustain further harm. If the timing belt is damaged, the car won’t turn over, won’t start, and won’t do anything at all.
Q: What does a bad timing belt sound like?
When a timing belt starts to wear out, it makes a ticking noise in front of your car. When trying to start the engine, the belt will make a whining sound if it eventually fails. A whining sound indicates low engine compression.
Q: How do I know when my timing needs replacement?
A few indications or signals will let you know when it’s time to change your timing belt. Therefore, you should check and replace your timing belt as soon as you observe these symptoms.
- The recommended replacement date has passed for you. You must replace the belt if the manufacturer’s suggested replacement date has passed.
- The timing belt itself is deteriorated. The ideal time to replace your timing belt is when you become aware of its wear.
- engine has a misfire. Keep in mind that numerous factors can lead to your engine misfiring.
- The car won’t crank over. Your engine won’t start if your timing belt breaks. Be aware that a number of factors can prevent your engine from starting.
- Your car is in front of a ticking noise. You might hear ticking sounds as your timing belt begins to fail.
Honda stopped using timing belts when?
All Civic cars from 2006 and later lack a belt. They already have a timing chain, so it won’t need to be changed. Therefore, if you’re looking for a timing belt for a 2019 Honda Civic, for instance, you’ll discover that it actually has a timing chain.
What does a Honda timing belt cost?
One of your Honda’s engine’s most important parts is the timing belt. Unfortunately, a lot of drivers fail to notice it. The expense of replacing the timing belt can be high; it normally ranges from $500 to $1,000.
Which Honda engines are equipped with timing belts?
By looking at the model year and trim level of your Honda Accord, you can typically determine if it has a timing belt or a timing chain. There are typically two different engines available in the Honda Accord model years, each with its own corresponding engine system. Fortunately, there is a helpful guide. Your Honda Accord features a timing belt if it was manufactured between 1997 and 2002. Your engine has a timing belt if you have a 4-cylinder model from 2003–2007; if you have a V6 model from those years, it has a timing chain. A 4-cylinder Accord from 2008 to 2012 will use a timing chain, while vehicles with V6 engines have a timing belt. The V6 vehicles have a timing belt from 2013 to 2017, but the 4-cylinder variants continue to use a timing chain. All of the available engines come with a timing chain as of the 2018 model year.
Is it worthwhile to replace a timing belt that is damaged?
Timing belts are important, but unless your owner’s handbook specifically says to, there’s no need to repair them on a regular basis. Between 60,000 and 100,000 miles, some automakers advise changing the timing belt, while others don’t. Many timing belts available now can last 100,000 miles or more before they need to be replaced.
How much does it cost to fix a timing belt that is damaged?
The engine of your car cannot function without a timing belt. Timing belt preventative maintenance is far less expensive than waiting for it to break. O’Leary’s Automotive provides skilled mechanics who can assist if you need high-quality timing belt repair in Wilmington, North Carolina.
The camshaft and the crankshaft are two different types of shafts found in your engine. These shafts are made to start the engine cycle and deliver torque while controlling the pistons in the engines. The camshaft and crankshaft are controlled by grooves or teeth on the timing belt. This makes it possible for the engine valves to open and close precisely when necessary for efficient operation.
Timing belts comprised of chains and gears are used in some automobiles. Although these timing belts are more resilient, they need lubrication to function. The timing belts in many modern automobiles are comprised of a rubber composition. These timing belts tend to wear out more quickly but are quieter and more energy-efficient.