Belts don’t cost a much by themselves. Since many pieces must be removed in order to reach the belt, labor is where the true expense lies. Your best chance is to shop about and compare prices, but be prepared to pay anything between $409 and $919. (including parts and labor).
In This Article...
How can I tell if my timing belt needs replacement?
The crankshaft and camshaft are both driven by a series of pulleys that are connected by timing belts. Although the teeth they utilize for this are designed to grasp and move easily, if the timing belt begins to wear down, it may result in a recurring clicking or ticking sound emanating from inside the engine.
How much does a Honda timing belt replacement cost?
One of your Honda’s engine’s most important parts is the timing belt. Unfortunately, a lot of drivers fail to notice it. The expense of replacing the timing belt can be high; it normally ranges from $500 to $1,000.
What occurs if the timing belt snaps?
Some engine parts can malfunction without causing significant harm. Without any issues, you can drive to your mechanic and get the part replaced. But with a timing belt, this is not the case. The camshaft will stop turning when the timing belt snaps, but the crankshaft will continue to rotate at 1000 revolutions per minute. Because of this, the pistons will keep rising and falling in their cylinders and, occasionally, may hit the valves. The pistons, valves, and cylinder heads will sustain damage when this occurs, and because to how quickly it occurs, the damage will be almost immediate.
It is crucial to pay close attention to your engine and make sure it is operating smoothly. Take your car to a repair right away if you begin to notice any of the aforementioned symptoms. It can be nothing, only require a quick correction, or indicate more serious issues that could develop into the dreaded timing belt failure while driving. Come to Professional Auto Repair’s shop and let us examine your timing belt and other parts to ensure that your car is working properly.
Honda stopped using timing belts when?
All Civic cars from 2006 and later lack a belt. They already have a timing chain, so it won’t need to be changed. Therefore, if you’re looking for a timing belt for a 2019 Honda Civic, for instance, you’ll discover that it actually has a timing chain.
How can I tell if I need to replace my timing chain?
Timing chains do not require routine replacement, but timing belts do. The timing chain shouldn’t need to be changed unless it has been harmed, overworked, or otherwise compromised. Your car will most likely experience one or more faults if there is a timing chain issue.
A broken timing chain will show the symptoms listed below:
- Starting the car is challenging.
- Misfiring engines and sluggishness
- The check engine light is on.
- The timing chain has noise.
- The engine shakes or rattles while it is idling.
- The vehicle won’t start
You might hear noise coming from the area where the timing chain cover resides. This noise is frequently the result of a loose timing chain, which may be brought on by a broken timing chain tensioner, guide, or other issues. More serious issues will arise if you ignore the early warning signs, so be sure to check the timing chain as soon as you hear a noise coming from where it is mounted.
How long does it take to replace the timing belt on a Honda?
It does need some engine knowledge to replace a timing belt and water pump, so if you don’t have much expertise working under the hood, we advise leaving it to the experts. However, if you prefer making your own repairs and restorations, you can do it yourself and avoid paying hefty repair expenses in the process.
Starting with the tools you’ll need, we’ll walk you through the replacement of a timing belt and water pump step by step.
What You’ll Need to Replace the Water Pump and Timing Belt
- Set of Allen keys
- a fresh timing belt
- new antifreeze/coolant
- Tip-Ex, white chalk, and white paint (for marking the cogs for simpler reassembly)
- bags made of plastic and a permanent marker (for labelling nuts, bolts and parts you remove from the engine)
- Wrench socket set
- tools for driving screws, such as Philips and slot drive
- a fresh water pump
- jar or bucket (for collecting coolant)
- leather gloves
Step 1: Preparation
Get your car and work area ready first. Depending on your degree of experience, changing a timing belt and water pump can take anywhere from one to three hours, so make sure you have the time and space necessary. Before you begin, carry out the following:
- Before starting, make sure the engine is entirely cool.
- Since coolant will spill out when you remove the water pump, place a bucket underneath it. To find the pump, see your car’s manual.
- To reach the undercarriage beneath the engine, jack up the front of the automobile.
- To stop the engine from spinning while you’re removing the timing belt, put the engine in drive and use the handbrake.
- Prepare all of your tools, and have bags and a pen on available to name and store the engine parts you remove.
Step 2: Removing the Belts
You must first remove the fan belt and power steering belt because they are located next to the cover that protects the timing belt and water pump. To remove the belts, take the following actions:
- To access the timing case and crankshaft pulley, do the same with the power steering belt by moving it aside.
- The fasteners holding the alternator in place should be loosened. The fan belt can then be removed by lightly tapping it.
- Crankshaft pulley: Loosen. To access the engine and remove the bolt, you’ll need a long wrench arm.
How many miles is a timing belt good for?
According to various schedules, including data provided by the manufacturers, a timing belt typically has to be replaced after 7 to 10 years, or between 60,000 and 105,000 miles, whichever comes first.
Are new Honda timing belts required?
A Honda Accord’s timing belt typically has to be replaced every 60,000 to 100,000 miles. Asking your mechanic to inspect the water pump, timing belt, and pulleys simultaneously when it’s time to replace your timing belt is an excellent idea. They frequently need to be replaced at the same time in order to guarantee that the system is operating properly. Your engine depends on timing belts and chains to perform vital tasks. They are both in charge of your engine’s mechanical timing. The crankshaft and camshaft, as well as the piston and valve movements within the engine, are all governed by the mechanical timing. Your engine won’t operate correctly, and it might not operate at all, if none of these components function at the appropriate moment.
How long does a timing belt replacement take?
Timing belt replacement is a pricey service. Depending on the vehicle, it is a complex, time-consuming process that can take 48 hours. However, repairing the timing belt before it breaks will avoid engine damage and ultimately cost you less money.
Does the timing belt resemble the serpentine belt?
The alternator, power steering pump, air conditioning compressor, and (sometimes) water pump are some of the engine accessories that are powered by the serpentine belt, a long rubber belt.
Serpentine belts are sometimes referred to as fan belts or accessory belts. This is due to the fact that earlier automobiles had many drive belts connecting the engine to the accessories (such as the radiator fan).
But in current cars, all the accessories are often powered by a single belt that passes through several pulleys.
The most reliable and effective method is to use just one belt, but this also means that if your car’s serpentine belt breaks, everything stops operating. The A/C will stop working, your battery will eventually fail, and the engine could overheat. Additionally, it might harm the engine accessories that it regulates.
This is why it’s crucial to change your serpentine belt on a regular basis.
Serpentine Belt vs. Timing Belt
Be careful not to confuse a timing belt with a serpentine belt. Your car’s timing belt and serpentine belt serve quite distinct purposes.
The timing belt, which is housed inside the engine, maintains alignment between the crankshaft and camshaft. As a result, the engine operates smoothly because the intake and exhaust valves open and close in sync with the pistons.
The engine accessories are kept working smoothly and effectively by the serpentine belt. It links all of the engine’s accessories to the crankshaft on the outside of the engine.
When examining the grooves, it is simple to distinguish between the two. The horizontal “teeth” of a timing belt are shaped to fit the crankshaft and camshaft cogwheels. Multiple V-shaped grooves run vertically along a serpentine belt’s length.
Ask your mechanic or check the owner’s handbook to determine if you also need to change your timing belt at the same time as these other belts, as they frequently need to be replaced at the same time.
How much does a timing belt repair cost?
The engine of your car cannot function without a timing belt. Timing belt preventative maintenance is far less expensive than waiting for it to break. O’Leary’s Automotive provides skilled mechanics who can assist if you need high-quality timing belt repair in Wilmington, North Carolina.
The camshaft and the crankshaft are two different types of shafts found in your engine. These shafts are made to start the engine cycle and deliver torque while controlling the pistons in the engines. The camshaft and crankshaft are controlled by grooves or teeth on the timing belt. This makes it possible for the engine valves to open and close precisely when necessary for efficient operation.
Timing belts comprised of chains and gears are used in some automobiles. Although these timing belts are more resilient, they need lubrication to function. The timing belts in many modern automobiles are comprised of a rubber composition. These timing belts tend to wear out more quickly but are quieter and more energy-efficient.
Warning Signs a Timing Belt Replacement is Needed
The majority of timing belts require replacement every 60,000 to 90,000 miles. Because it is crucial to the engine’s functionality, the timing belt acts inside the engine. Don’t put off changing the belt until it breaks. Your engine won’t start if your timing belt breaks.
You might observe one or more of the following if your timing belt is broken or worn out:
- engine stalls
- damaged pistons or valves
- lower oil pressure
- Rumbling or rough idling coming from the engine
- the engine’s smoke
Timing Belt Repair & Quality Auto Repair in Wilmington, NC
It is best to have a qualified, quality auto repair technician evaluate your car as soon as possible if you have encountered one or more of the aforementioned symptoms. Expect to pay between $300 and $500 for the service if your timing belt needs to be replaced. Many automobiles’ timing belts require some disassembly and reassembly since they are not always easily accessible. Smaller engines in economy cars result in less work. However, larger trucks, SUVs, or premium cars can take a lot longer.