It should come as no surprise that your new Ferrari is produced in the same location every Ferrari has been made: Maranello, Italy. Ferraris are known as much for their legacy as their power and grace.
In This Article...
Ferrari
The automaker is the subject of this essay. See List of Ferrari Road Cars for a list of the road models that Ferrari has made. Scuderia Ferrari is the name of the Formula One team. Ferrari, the 2003 biographical movie (film). Enzo Ferrari is the name of the founder. Ferrari has other uses as well (disambiguation).
In 1969, Fiat S.p.A. purchased 50% of Ferrari, and in 1988, it increased its ownership to 90%. Fiat Chrysler Automobiles (FCA), which at the time of the announcement owned 90% of Ferrari, said in October 2014 that it intended to separate Ferrari S.p.A. from FCA. The reorganization that made Ferrari N.V. (a Dutch business) the new holding company of the Ferrari S.p.A. group and the subsequent sale by FCA of 10% of the shares in an IPO and concurrent listing of common shares on the New York Stock Exchange marked the beginning of the separation in October 2015. The remaining parts of the split involved distributing FCA’s investment in Ferrari’s business among FCA shareholders, with Piero Ferrari continuing to retain 10% of it. The spin-off was finished on January 3, 2016.
The business has garnered attention for its ongoing involvement in racing throughout its history, particularly in Formula One, where it is the oldest and most successful racing team, having won the most constructors’ championships (16), as well as the most drivers’ championships (48). (15). Ferrari road vehicles are frequently regarded as a representation of riches, elegance, and speed. The 165,000 square meter (16.5 hectare) Maranello facility is where Ferrari automobiles are made. Ferrari was named the most powerful brand in the world in 2014 by Brand Finance. By market capitalization as of 2021, Ferrari ranks as the tenth-largest automaker at $52.21 billion.
An car industry legend is created
Enzo Anselmo Ferrari, who was born on February 18, 1898, in Modena, Italy, developed a passion for fast vehicles when he was 10 years old after seeing several races at the Circuit di Bologna. His official schooling was quite limited, and he barely made it through the 1918 Spanish Flu pandemic that killed both his father and brother.
In 1919, the young Ferrari was hired as a test driver by the Milan-based carmaker Costruzioni Meccaniche Nazionali due to his unwavering commitment to racing. Ferrari was given the opportunity to drive race cars later that year, and he finished fourth in the demanding uphill Parma-Poggio di Berceto competition and tenth in the Targa Florio. According to IMDb, a year later, Ferrari’s friend Ugo Sivocci assisted the aspiring racer in landing a job with Alfa Romeo. According to TheFamousPeople, Ferrari continued to compete in races throughout Italy until 1931.
Ferrari relocated to Maranello in 1945, when he started work on the first 12-cylinder, 118 horsepower sports automobile bearing his name. According to the Italian magazine RevToTheLimit, modern Ferrari automobiles are still produced in Maranello.
the interior of the plant where new Ferraris are produced.
The Ferrari manufacturing combines human and mechanical labor. The expertise of humans and the accuracy of automation are combined to build the iconic automobiles.
Ferraris are created in this plant. The 165,000 square meter facility, located in Maranello, Italy, was originally chosen by business founder Enzo Ferrari in 1947. It manufactures 8,400 cars annually and employs 1,300 people. Ferrari wouldn’t have it any other way, thus every vehicle that has ever carried the fabled Prancing Horse was painstakingly put together here.
It takes three months to create each Ferrari. The engine is cast in the plant’s internal foundry, which is the first and most crucial step. The assembled parts are then brought to the line, where 147 engines are manually constructed each day.
Two robots are used to attach the Ferraris’ valve mechanics once the engine is finished; this is the only step that does not include manual labor. According to Vincenzo Regazzoni, the company’s chief manufacturing officer, “the robots work so closely together that we call them Romeo and Juliet.”
Ferrari allowed WIRED inside to observe the critical phases of the manufacturing process from beginning to end to commemorate its 70th anniversary.
Before installing wheels, bumpers, and windscreens, technicians on the 21,000m2 Maranello line affix mechanical components to the interior of each Ferrari, like this 488 GTB. The interiors are installed and the engine is tested after the car reaches the end of the line.
32 stations make up the V8 assembly line, and each station has a worker focused on a different stage of production. Ferrari’s V8 engines are built separately from its V12 engines because the latter are more complicated and need more manual labor.
This V8 engine is intended for the four-seat Ferrari GTC4Lusso T, which features rear-wheel drive as opposed to all-wheel drive. The engine has been designed to provide a comparable enticing sound, but not being as loud as the larger V12 because it is intended for urban drivers.
Each mechanical lift is created up of steel hooks and holds a certain automobile frame (in this case, a 488 Spider). These are used to transport the vehicle from one station to the next while rotating the chassis and automatically altering its height.
All Ferraris have aluminum doors, which are produced at the Scaglietti plant in neighboring Modena, 22 kilometers from Ferrari’s main location, using pressing and cutting equipment. Only when a car body has reached the end of the production line are the doors affixed to it.
The underbodies of the cars are where the engine, transmission, and suspension systems are placed. The automatic guided vehicle (AGV) that had been moving the engine along the assembly line is dismantled, and the engine is then fastened to the automobile body.
Romeo and Juliet, two robots, perform a task that would be too complex for humans: they fuse the valve seats that will go into the engines. Romeo heats up the cylinder heads with compressed air while Juliet submerses the aluminum rings in liquid nitrogen. The components are then put together.
Where was Ferrari first created?
The first Ferrari model, the 125 S or 125 Sport, didn’t leave the factory door of the Via Abetone Inferiore in Maranello, Italy, until 1947, over ten years after Enzo departed Alfa. Initially, there were just two models made.
Do all Ferraris originate from Italy?
It should come as no surprise that your new Ferrari is built in the same location every Ferrari has been made because Ferraris are known as much for their legacy as their power and elegance: Italy’s Maranello
What factory produces Ferrari engines?
Making of Ferrari Engines. While many parts for a Ford, Buick, or Mercedes-Benz are obtained from other countries, every Ferrari is built in Maranello, where they have always been built. Additionally, every Ferrari engine is hand-built to provide the highest level of quality control.
Who created the original Ferrari?
Although every attempt has been made to adhere to the citation style guidelines, there may still be some inconsistencies.
If you have any questions, kindly consult the relevant style guide or other sources.
Enzo Ferrari was an Italian car maker, designer, and racing driver who was born in Modena, Italy, on February 18, 1898, and died there on August 14, 1988. In the second half of the 20th century, Ferrari automobiles frequently won international racing competition.
After World War I, Ferrari raced test vehicles for a tiny car manufacturer in Milan. He started driving racing cars for the Alfa Romeo Company in 1920, and in 1929 he established a racing stable called Scuderia Ferrari. This squad continued to represent Alfa Romeo even after Ferrari himself stopped competing in races in 1932. For Alfa Romeo, the first racing vehicle entirely created by Ferrari was constructed in 1937. Ferrari created Ferrari SpA in 1939, severing his team’s ties to Alfa Romeo, but it wasn’t until 1946, during World War II, that the company began producing its first race vehicles. The company’s automobiles quickly gained a reputation for their incredible speed and exquisite excellence. From the 1950s on, Ferrari’s Formula 1 racers and sports cars won numerous Grand Prix events and manufacturers’ championships, at times overwhelming the field. The company’s high-end sports cars developed a similar reputation for speed and deft handling.
Enzo Ferrari sold Fiat SpA a 50% stake in his business in 1969, although he stayed in charge of the corporation as president until 1977 and the Ferrari racing team until his passing.
Are Ferraris still built by hand?
Ferrari was established in 1929 as a manufacturer and sponsor of racecars, and since 1947 it has been making hand-finished road cars. The Ferrari plant was created by French architect jean nouvel, and company president luca di montezemolo began modernizing it in 1997. Every Ferrari in the world is still only made on the campus in Maranello, where each one is made specifically for the customer and every installation is done by hand. Consequently, the company cranks out 10 to 12 cars per day.
Designboom recently paid a visit to the Ferrari factory and is happy to share with you a three-part inside look at how the car was made. We begin this piece near the process’ conclusion at the “new assembly line” building, and later this week, we’ll take you on a tour of the facilities where engines are made and examine the Ferrari design process.
The ‘new assembly line,’ the most recent addition to the Ferrari factory, is where a car is made in its final phases. The structure is about 21,000 square meters in size and has assembly lines for 8 and 12 cylinder automobiles spread across two floors in addition to a test area, a facility for developing prototypes, offices, and conference spaces. Jean Nouvel himself designed the area, which offers openness and light despite its heavy technology and mechanical transport system thanks to a ceiling made of reflective plates and dazzling skylights.
The carrozzeria Scaglietti in nearby Modena builds the bodywork and chassis of Ferrari automobiles before painting and finishing them in a different facility on the Maranello compound. In the end, everything arrives to the “new assembly line” building, including the car bodywork, fully tested engine and gearbox modules, and the engine assembly facility right next door. The final stages of a manufacturing process that lasts about three weeks are where the engines are installed into the bodies, the top panel of choice is bolted in, the chosen seating materials, dashboards, and any special inserts are installed by hand by Ferrari technicians. This process takes each vehicle about three working days from start to finish.
For the convenience of the technicians, each car travels the circuit with a specification document detailing every aspect of its construction. The production of v-8 and v-12 cylinder cars takes place on separate assembly lines, with the former requiring closer to an hour of work at each station on average. The Ferrari plant runs on just one 8am to 5pm shift each day as part of montezemolo’s “formula uomo” program for worker health and pleasure.
The “new assembly linecarousel “‘s system uses pincer machines made by the Italian robot company Comau that make it simple to access the vehicle’s sides. The cars can be turned to allow work to be done on their underbelly and are positioned at the ideal height for each worker.
Following our visit of the Ferrari design facilities, the following installment in the series will focus on designboom’s piece on Ferrari’s mechanical workshop, which produces engine parts.
Ferrari: Italian or French?
Enzo Ferrari founded the Scuderia Ferrari racing team in 1929, and the Italian company Ferrari has been making sports vehicles since 1947.