The Toyota Prius’ shifting is regarded as a classic feature.
It protrudes from the dashboard like the classic Alfa Romeo’s shifter. From it’s anything but conventional.
The gearshift is one of the driver’s main interfaces with the Prius’ intricate electrical, mechanical, and software engineering.
The Prius shifter does have one feature that has always been a mystery.
You have the typical “reverse,” “neutral,” and “drive” options, as shown in the picture below. No “park,” although there’s a button for that on the dash. (This shifter, by the way, is from a 2016 Prius that we examined, albeit the part has been on the car for a while.)
Many people appear to believe that “B” enhances regeneration and sends more energy back into the system since the Prius has “regenerative braking,” which returns otherwise squandered energy from braking to the hybrid drivetrain.
But that is wholly incorrect. Since I’m supposed to know something about vehicles, I know because I was mistaken about it.
The “B” produces “engine braking,” which simulates the actions of a conventional transmission by simulating a downshift to slow the Prius down when it is descending a slope.
Why? if you’re traveling up a protracted, steep grade, to avoid overloading the brakes. The feature should be used at that time, much like a lower gear in a stick shift or a lower setting on an antiquated automatic transmission.
Tell the driver of a Prius to keep it in “D” the next time you see them driving around in “B” while you are in the vehicle.
In This Article...
Should a Prius be operated in B mode?
The gear shift on a typical car is analogous to the electronic mode selector used by the Prius. The Prius includes a power button, a park button, and a selector for modes R N D and B instead of a traditional car’s modes P R N D 2 1 (park, reverse, neutral, drive, second gear, first gear) (reverse, neutral, drive, and engine-Braking).
The driver NEVER needs to switch to “B” mode during routine driving (Engine braking mode). The following methods are optional. When driving down a long, steep incline (such as a mountain road), “B” mode is recommended because using the brake pedal to adjust speed could cause the brake pads to overheat and fail.
In a typical vehicle, the driver responds to that circumstance by reducing speed to an appropriate level and engaging a lower gear (2nd or 1st). As a result, the engine must spin more quickly than it should, “losing” energy through vacuum losses but also assisting in maintaining a safe driving pace without scorching the brake pads.
The driver of a Prius responds to the circumstance by switching to “B” mode. This instructs the Prius to try to mimic “engine braking” in a traditional car. The Prius will accomplish this utilizing either regenerative braking or high-RPM zero-fuel-flow engine braking, depending on the vehicle’s speed and battery SOC (state of charge).
Engine braking is ineffective because it turns kinetic energy into heat by using the engine as an air pump. Regenerative braking that isn’t essential wastes energy during the conversion process. Because of this, “B” mode won’t recharge your batteries more effectively than just braking and is not suggested for everyday driving (regenerative braking is helpful when it replaces friction braking, but it’s not as efficient as coasting at a steady speed). You can “downshift” into “B” mode on a Prius, just as you might do when traveling down a long, steep hill in order to protect your brakes. The technology won’t allow you to shift in a damaging way because “Shifting” is entirely electrical. (You won’t get further than neutral if you attempt to shift into reverse while driving swiftly forward.)
The “B” mode can be utilized to increase the range of the EV battery in the case of the Prius “Plug-in” model, which has an EV drive mode. If in hybrid mode, you must first convert to EV mode before engaging “B.” This works well while approaching intersections since it eliminates the need to use the brakes before reaching the intersection. Each time this procedure is applied, the EV mode’s range is typically increased by.1 to.2 miles.
What does a Toyota Prius shifter’s B stand for?
What Does the B in a Prius Stand For? The Prius B mode, sometimes known as “braking,” is the position for downshifting and boosts engine drag to assist in slowing your car down.
Can you always operate a vehicle in B mode?
There are oddities with B-mode; I’ll speak from experience with the ZE50; I’m not familiar with the i3, Tesla, or other models.
I’ve discovered that B-mode can be activated continuously. B-mode doesn’t forcefully slow down the automobile above 70 km/h (45 mph); instead, it acts more like D-mode. It starts to feel a little strong below 70 km/h. It is quite strong at speeds under 50 km/h (30 mph).
Both when the battery is cold and when it is fully charged (more than 93%), B-performance mode’s is constrained. The car continues to slow down at a rate that, in my opinion, is similar to what would occur if the battery were warm or not fully charged, but I suppose this is accomplished through friction braking.
It takes some getting accustomed to, however if you’re from ZE20 or ZE40… The regen from those earlier models will be missed. At first, B-mode could appear tricky, but you might become used to it.
Note that unlike Tesla, where pressing the brake pedal activates the friction brakes, Zoe has decoupled brakes (managed by software), so whether you hit the brakes or utilize B-mode, you’re likely to get the same level of regen.
How quickly does the Prius transition to gas?
A Prius often shifts from battery to petrol while traveling at speeds of at least 15 mph. Call the hybrid experts at Luscious Garage in San Francisco, California, at 415-213-2336 for all your hybrid vehicle repair needs right away!
Normal mode
Normal mode is ideal for consistent, daily driving. In essence, it is a Toyota Prius’ factory setup. The heater and air conditioner will run as efficiently as possible in regular mode, and the gas pedal will be responsive (but not overly so!).
The usual mode is ideal for your daily journey around the city because it revolves around striking the ideal balance.
How is the B gear used in an automatic vehicle?
At any moment while driving, choose B. When the accelerator is released while the hybrid battery is charged, the automobile brakes using the electric motor in the B position. This increases the number of times the hybrid battery can be recharged because charging also happens without the driver depressing the brake pedal.
It is possible to manually shift into lower gears from the B position. The gear being used (from 1 to 8) is displayed on the driver’s display.
- To shift down to the next lower gear, press the gear selector once in the reverse direction.
- To change down even more, press the gear selector again in the reverse direction.
The car must have steering wheel paddles in order to manually shift to a higher gear.
To get back to the D position, forward-press the gear selector.
To prevent jerking and stalling, the gearbox shifts down automatically if the speed drops to a level that is too low for the specified gear.
What is B mode used for?
the B is “One of the Twingo Electric’s driving modes is brake. When engaged, it quickens the rate of deceleration, reducing the need for the driver to press the brake pedal. It’s comparable to what would happen if the motor brake on a combustion-powered car could be adjusted for intensity. The regenerative braking technology causes the car to slow down significantly but smoothly as soon as the driver pulls their foot off the accelerator. In cities and during periods of heavy traffic, this mode offers a driving experience that is very straightforward and natural. In conjunction with the D mode (D for “Drive), which causes the automobile to slow down less quickly when the gas pedal is let off.
Should I take D or B to drive?
By simply releasing the accelerator, “B” provides far greater regen. With little experience, this enables you to drive with practically just one pedal. It works well for commuting in cities where you regularly have to slow down for traffic lights or just regular congestion. Additionally, it is advantageous when going downhill.
D is more effective in circumstances with generally constant speed, such as freeways, and is better at gliding.
I virtually solely drive in B. For owners of models from 2011 and 2012, this is almost equivalent to the Eco setting without sacrificing acceleration (more accurately acceleration for a given distance of the accelerator).
What transpires if a Prius runs out of gas?
After your Prius’s gas tank runs out, you’ll probably be able to keep it moving, but don’t plan on traveling very far or quickly. Although Prius owners have apparently traveled several miles without any fuel, the engine can only travel at 18 mph.