- Place your Audi A4 in PARK while turning on the ignition.
- On your Apple or Android device, turn on Bluetooth.
- Bluetooth should be in pairing mode.
- On the Audi MMI Display, choose PHONE.
- Choosing CONNECT Mobile Device.
In This Article...
How can I link myAudi music to Bluetooth?
Android Auto Setup for Audi
- Make sure your mobile device has Bluetooth turned on.
- Turn on your Audi, then put it in PARK.
- Press Phone > Connect Mobile Device on your Audi’s touchscreen.
- On the Audi touchscreen, choose the device you want, and make sure the PINs on both of them match.
Is Bluetooth available on the Audi MMI?
Bluetooth-enabled mobile phones and music devices can wirelessly connect to Audi models with MMI Navigation Plus, providing you with hands-free access to many of its features.
Why can’t I use Bluetooth in an Audi?
To check the phone and bluetooth/wifi, try going to the menu, settings, and factory reset. On practically every new Q7, I have to perform this. Updates must tamper with the system in some way until a reset is performed. To check the phone and bluetooth/wifi, try going to the menu, settings, and factory reset.
What MMI model do I have?
The simplest method is to see what software version is currently loaded on the PC. To do this, hit the CAR button to access the vehicle’s menu, then press SETUP or MENU, choose “Version from the submenu, and then read the value from the line with the letters “SW.”
- SW: XX-XX XX.X.X XXXX MMI 2G
- BNav XX XXXXX, MMI 3G Low/Basic
- Highest MMI 3G: HNav XX XXXXX
- HN+ XX XXXXX or HN+R for MMI 3G+
- RMC XX XXXXX: MMI
- Mib1 for MMI: MHIG XX XXXX
- Mib2 for MMI: MHI2 XX XXXX
- MSTD: MSTD XX XXXX for MMI
This ought to assist you in selecting the correct firmware version for your vehicle. Any inquiries? Just inquire in the comments or get in touch with me through my contact page.
Why doesn’t myAudi MMI function?
If your MMI doesn’t even turn on, it’s most likely not getting power. The compartment in the left side of your trunk houses the fuses that regulate a number of the MMI modules. Examine the fuses by prying open the side panel in the trunk.
How can my Audi MMI be updated?
Put the SD card in slot 1 and access the Engineering Menu in your MMI by selecting the “Update” option. Select SD1 as the source, then choose the firmware and “Standard” on the following page. Depending on the file size, the MMI update should take between 30 and 60 minutes to complete.
How do I restore the factory settings on my Audi MMI?
Methods For MMI Factory Reset
- In the MMI, scroll to the Settings option and click it. Select “Factory settings” from the list of options by scrolling down.
- To reset everything, select “Select all entries,” or pick and choose the specific choices you desire.
- Go to the list’s bottom and choose “Restore factory settings.”
How can I reset my MMI on my Audi 2021?
You have probably already watched the video I made showing how to reset the Audi, and you are probably reading this to gain more knowledge.
- Push the start/stop engine button to start the car.
- the volume control, then move your hand to the right.
- and depress on it (the volume control)
- Aim to hold it for 15 seconds (seems like eons)
- then the message on the screen will vanish and then come back.
- The reboot is finished.
Hopefully, all of your app readouts and instructions for the drive modes, radio, garage, etc. are displayed on your screen.
Why won’t my car and Bluetooth connect?
The Bluetooth system can be reset in a variety of ways. The “soft” reset can fix some Bluetooth connectivity issues. Remove the vehicle profile from your phone and turn off Bluetooth to reset the system. Remove your phone number from the system in your car. If there is a Bluetooth option for vehicles, disable it. Now that Bluetooth is enabled on both your phone and the car’s infotainment system, try to couple the devices once more.
Why is my phone not working with my car?
- Turn off Bluetooth by going to Settings > Bluetooth. Turn on Bluetooth once more after waiting for roughly 5 seconds.
- For more details on how to pair with a Bluetooth device, consult the owner’s manual that came with your automobile. The majority of vehicles demand phone setup on the dashboard.
- Try renaming your device if you have many phones connected to your car stereo: Enter a new name by going to Settings > General > About > Name. Then attempt reestablishing contact.
How can I restart my car’s Bluetooth?
The best approach to accomplish this is to turn off Bluetooth on both your smartphone and your car. Remove your smartphone from the infotainment system in your car, along with any history of connected devices. After that, turn off the car and restart your phone while still in it.