5 Liter Pentosin Synthetic Motor Oil.
In This Article...
Engine Oil
All TEMPS….5W-40, 5W-30 – Use a viscosity grade appropriate for the climate, season, and driving circumstances where the vehicle is operated if synthetic oil that satisfies the relevant Audi, Volkswagen oil quality standard with the suggested viscosity grade is not readily available in your area. Verify that the oil satisfies the requirements for Audi and Volkswagen.
Capacity:
Wagon, 6.3 quarts with filter. Add 0.5L (0.5 qt) less than the indicated capacity, turn on the engine, and let it run until the operating temperature is around. 60 C (140 F), turn off the engine, wait three minutes, check the dipstick, and fill to the full mark as shown on the dipstick. Depending on the model, may be more or less than 0.5L (0.5qt).
Sedan, 6.1 quarts with filter. Add 0.5L (0.5 qt) less than the indicated capacity, turn on the engine, and let it run until the operating temperature is around. 60 C (140 F), turn off the engine, wait three minutes, check the dipstick, and fill to the full mark as shown on the dipstick. Depending on the model, may be more or less than 0.5L (0.5qt).
What type of oil should I use for my 2011 VW Jetta TDI?
The VW Jetta 2.0L TDI diesel engine requires 5 liters of RAVENOL VMP 5W30 Engine Oil with Fully Synthetic USVO Technology, which carries OEM Approval for VW 507 00 oil quality standard. 1 sealable oil filter (OEM Mahle)
What kind of oil is used in a VW Jetta?
To keep the engine properly lubricated and operating at peak efficiency, your VW Jetta needs a very specific kind of oil. You should check for 5W30 motor oil when buying replacement oil. Compared to regular oil, this synthetic oil is made to tolerate engine heat better.
Whether 5w30 or 5w40 is preferable.
In cold weather, both have the same viscosity rating, however in warmer weather, 5W-40 is thicker than 5W-30. It’s important to note that 5W-40 is the recommended oil for the majority of diesel applications. Vehicle manufacturers almost never suggest using 5W-40 oil in a gas-powered engine.
What makes 5w30 and 5w40 different from one another?
Using 5w30 oil:
For 5w40 oil:
This essentially indicates that each oil is equally viscous at lower temperatures and will remain so at a temperature of 30C, but that 5w40 oil operates better at higher temperatures than 5w30 oil, being effective up to ambient temperatures of 50C as opposed to 30C.
In comparison to, say, 10w40 oils, 5w40 and 5w30 motor oils have winter viscosity grades of five, making them effective down to temperatures of -30C and more viscous at extremely low temperatures.
As a result, 5w40 oils are probably utilized in higher-performance engines that operate at higher temperatures and loads than usual, such as those used in vehicles driven in metropolitan environments, which frequently sit in traffic, or in vehicles traveling at very high speeds, for example.
5w30 oils are a fantastic option if your vehicle is not made to be driven at a high rate of speed or if you drive more cautiously and sustainably. These typically perform better for certain engine parts like oil pumps, can clean the engine better, and have longer lives because they operate at lower temperatures.
What type of oil does VW advise for TDI?
The ease with which oil pours at a given temperature is referred to as viscosity. Lower viscosity means easier pouring oil.
The Society of Automotive Engineers establishes classifications for oils’ viscosities (SAE). The number in their categories preceding W, which stands for winter, indicates how far below 0C an oil will still function well. The circulation in cooler temperatures is improved by a lower number. Following is a breakdown of the classifications:
The engine oil’s thickness at 100C is indicated by the number following the W. The thinner the oil is, and the quicker it will move around the engine, the lower the number. In general, thinner oil performs better in hot climates.
According to 5W, the oil will function normally down to -35C temperatures. This oil has a viscosity of 30 for hot weather and performs well in temperatures of up to 30C. Thus, between -35 C (5W) and 30C, our 5W-30 engine oil performs at its best (-30).
What is engine oil 5w40?
When comparing and selecting engine oil, you should take into account two crucial factors: how cold it gets in the winter and what the manufacturer recommends for your engine. 5w40 engine oils can be utilized in the majority of situations and are great for starting engines at low engine temperatures and still efficient at high engine temperatures.
The “W” refers for “winter; the number before it denotes the oil’s thickness at low temperatures (thus the W); the number following it denotes the oil’s thickness at higher temperatures (150oC on average), which is when the engine is actually running.
In comparison to, say, 10w40, 5w40 engine oil has a winter viscosity rating of 5, making it less viscous at extremely low temperatures. It has a hot viscosity grade of 40, making it at high temperatures just as viscous as 10w40 but less viscous than oils like 15w50.
The viscosity of an oil determines how easily it flows. Your engine won’t run smoothly if the oil is too thick. Moving parts won’t be shielded from deterioration by oil that is too thin. As the temperature changes, the viscosity rises and falls, respectively.
There is a trade-off between performance and protection when choosing an engine oil grade. While your engine is operating, an oil that is more viscous will protect engine parts better. On the other hand, an oil that is overly thick will somewhat hinder engine performance. It is crucial to speak with the engine manufacturer to determine the precise oil quality that is required.
The winter temperature in your region will determine whether you should use 5w40 engine oil or a substitute like 10w40. Because it flows more smoothly at low temperatures, 5w40 is preferable for starting your engine. High viscosities of 5w40 and 10w40 when the engine is hot and running make them both equally effective in preventing engine wear.
What kind of oil does VW suggest?
VW 502 00 compatible oil is required for the majority of Volkswagen gas engines, whereas VW 505 00 or 507 00 compliant oil is recommended for diesel engines. If you’re not sure what oil VW recommends for your specific model and year, ask a mechanic at our car service shop. We advise using 5W-30, 5W-40, or 0W-40 complete synthetic oil.
Additionally, OEM VW oil filters are available at our dealership and are affordable and pre-installed. Using our parts order form on our website, you can quickly and simply acquire the necessary oil filter.
Does Volkswagen require certain oil?
Volkswagen advises drivers to use engine-appropriate certified oil that specifically conforms with the VW oil quality standard. This condition is met by synthetic oils, but not all synthetic oils. Make sure the one you’re using specifically corresponds with the specifications mentioned for the engine in your car.
5W-30 oil is it synthetic?
The #1 High Mileage brand, Castrol GTX High MileageTM 5W-30, is a premium synthetic motor oil designed especially for cars and trucks with more than 75,000 miles on them.
When should Volkswagens have their oil changed?
The suggested interval for getting an oil change is once per year or once every 10,000 miles, whichever comes first, according to the official Volkswagen website. The manufacturer publicly admits that the VW Routan, which needs an oil change every 6,000 miles, is the exception to this rule. The ordinary Routan driver might need to get their oil changed twice a year.
How much does a Volkswagen Jetta oil change cost?
A Volkswagen Jetta oil change typically costs between $131 and $146. Between $35 and $44 is the expected cost of labor, while between $96 and $102 is the estimated cost of parts. Taxes and other fees are not included in this range, nor are your particular model year or geographic area taken into account. There might be more repairs required.
What happens if I fill my automobile with the incorrect oil?
Inadequate lubrication, overheating, and possibly transmission failure can result from using the incorrect fluid. Even after flushing the transmission, a mechanic might not be able to undo the damage. Your transmission might also be ruined if you accidentally add motor oil or brake fluid.
What is the purpose of 5W-30 oil?
Generally speaking, 5W-30 motor oil is a winter viscosity grade. Although it functions satisfactorily at greater temperatures, its best application is for drivers in colder climates.
It is often advised for petrol vehicles or a light-duty diesel engine because of its lower viscosity. In addition to these uses, 5W-30 multigrade oil is also employed for the following things:
- Some individuals might switch to this oil in the winter because it offers superior engine protection and aids in removing engine deposits in lower temperatures.
- For low-duty application in light vehicles and passenger cars
- Since it is less prone to thermal breakdown, it is better for drivers who frequently experience temperature fluctuations.
- For engines not operating under excessive pressure
Let’s look at some of the most frequently asked questions regarding 5W-30 motor oil now that we understand what it is used for.
Is 5W-30 suitable for hot climates?
When ought I to apply 5w30 oil? Always use the oil that the creator of your car recommends. However, 5w30 oil is a great option if you drive your car in an area with significant seasonal temperature differences because it can operate in temperatures as low as -30C and as high as 35C.