To keep the engine properly lubricated and operating at peak efficiency, your VW Jetta needs a very specific kind of oil. You should look for 5W30 motor oil when buying replacement oil. Compared to regular oil, this synthetic oil is made to tolerate engine heat better.
In This Article...
What kind of oil does VW suggest?
VW 502 00 compatible oil is required for the majority of Volkswagen gas engines, whereas VW 505 00 or 507 00 compliant oil is recommended for diesel engines. If you’re not sure what oil VW recommends for your specific model and year, ask a mechanic at our car service shop. We advise using 5W-30, 5W-40, or 0W-40 complete synthetic oil.
Additionally, OEM VW oil filters are available at our dealership and are affordable and pre-installed. You may quickly and conveniently acquire the necessary oil filter via our website using our parts order form.
Does VW need synthetic motor oil?
Any Volkswagen car produced after 2004 must use synthetic oil due to their distinctive design. The reason for this is because a VW engine’s valves are built differently from those in most other cars and are more likely to clog up with contaminants contained in regular oil.
Which type of oil should I use in my 2016 Volkswagen Jetta?
Full synthetic, OE recommended Mobil 1 Full Synthetic Engine Oil 5W-40 5 Quarts. 5W-40. 5 quarts of space.
What type of oil does the 2019 Volkswagen Jetta use?
Modern models are lighter than ever while also having greater power because to improvements in vehicle construction quality. Even with all the features that make today’s cars fantastic, there is still one thing that doesn’t change: soil. Because friction is a key driving factor, it’s crucial to keep your motor’s components properly lubricated so that you can operate as you should.
Our Boucher VW staff has the answer to your question below; have a look at it to see where you should stand if you’re asking, “What is the recommended oil type for the 2019 Volkswagen Jetta?
Volkswagen Jetta oil viscosity recommendation
The 2019 Jetta is an amazing feat of engineering with a turbocharged engine that is designed to perform in every circumstance. We advise using oil with a grade of 5W-30 to keep it operating at its peak efficiency. This viscosity can keep your engine running smoothly in the majority of temps Wisconsin can dish out, keep your engine and parts clean, and even aid in improved fuel efficiency.
How often should you replace the oil in your Volkswagen Jetta?
The outdated 3,000-mile limit is no longer relevant due to the use of synthetic oils. Naturally, it’s not a bad idea to replace your oil at shorter intervals than at longer ones, but in a pinch, you can drive your car for anywhere between 5,000 and 7,000 miles without changing it. Of course, this changes based on usage and the weather, but unless you go overboard, you should be fine!
5W-30 or 5W40: Which is preferable?
In cold weather, both have the same viscosity rating, however in warmer weather, 5W-40 is thicker than 5W-30. It’s important to note that 5W-40 is the recommended oil for the majority of diesel applications. Vehicle manufacturers almost never suggest using 5W-40 oil in a gas-powered engine.
When should Volkswagens have their oil changed?
The suggested interval for getting an oil change is once per year or once every 10,000 miles, whichever comes first, according to the official Volkswagen website. The manufacturer publicly admits that the VW Routan, which needs an oil change every 6,000 miles, is the exception to this rule. The ordinary Routan driver might need to get their oil changed twice a year.
Does VW require certain oil?
Volkswagen advises drivers to use engine-appropriate certified oil that specifically conforms with the VW oil quality standard. This condition is met by synthetic oils, but not all synthetic oils. Make sure the one you’re using specifically corresponds with the specifications mentioned for the engine in your car.
What is the price of changing the oil in a Volkswagen Jetta?
A Volkswagen Jetta oil change typically costs between $131 and $146. Between $35 and $44 is the expected cost of labor, while between $96 and $102 is the estimated cost of parts. Taxes and other fees are not included in this range, nor are your particular model year or geographic area taken into account. There might be more repairs required.
What sort of oil will work in a 2017 Jetta?
This 5W30 motor oil is suitable for the Jetta (and many other four-cylinder vehicles), and is easily found at any auto parts store, including right here at our service center!
Can I use 5W-30 with 0W-20?
No, you shouldn’t use a thinner SAE grade or a thicker oil for a suggested thinner oil vis-grade if your owner’s handbook calls for a thicker oil. The performance of your car’s engine will be protected and maintained if you use the right viscosity motor oil. Thus, while your vehicle is still covered by its manufacturer’s guarantee, always follow their advice.
**If your vehicle calls for 0W-20, avoid using 5W-30 in the rear. The vis-grade number and grade must match.
5W-30 oil is it synthetic?
The #1 High Mileage brand, Castrol GTX High MileageTM 5W-30, is a premium synthetic motor oil designed especially for cars and trucks with more than 75,000 miles on them.
0W-20 oil: is it synthetic?
High quality base oils and potent additives are required to manufacture a 0W-20. At very low temperatures, the basic oils must still be able to protect and flow. For the oil to flow smoothly at these low temperatures, a lot of synthetic oil is typically required. 0W-20 motor oils are either fully synthetic or partially synthetic (synthetic blend) and need synthetic base oils; they are not conventional (or mineral) motor oils. And the additives must be light enough to move easily while still guarding these more modern, sophisticated motors.
What occurs if I use 5W-40 as opposed to 5W-30?
Using 5w30 oil:
For 5w40 oil:
This essentially indicates that each oil is equally viscous at lower temperatures and will remain so at a temperature of 30C, but that 5w40 oil operates better at higher temperatures than 5w30 oil, being effective up to ambient temperatures of 50C as opposed to 30C.
In comparison to, say, 10w40 oils, 5w40 and 5w30 motor oils have winter viscosity grades of five, making them effective down to temperatures of -30C and more viscous at extremely low temperatures.
As a result, 5w40 oils are probably utilized in higher-performance engines that operate at higher temperatures and loads than usual, such as those used in vehicles driven in metropolitan environments, which frequently sit in traffic, or in vehicles traveling at very high speeds, for example.
5w30 oils are a fantastic option if your vehicle is not made to be driven at a high rate of speed or if you drive more cautiously and sustainably. These typically perform better for certain engine parts like oil pumps, can clean the engine better, and have longer lives because they operate at lower temperatures.
What happens if I fill my automobile with the incorrect oil?
Inadequate lubrication, overheating, and possibly transmission failure can result from using the incorrect fluid. Even after flushing the transmission, a mechanic might not be able to undo the damage. Your transmission might also be ruined if you accidentally add motor oil or brake fluid.
What is the purpose of 5W-40 oil?
In American diesel pickup trucks and European cars with gasoline engines, the 5W-40 viscosity is frequently advised for performance engines.
Consider Mobil SuperTM Synthetic Euro or Mobil 1TM Formula M if you drive a contemporary European vehicle. Below, compare these two oils. They can be applied to both diesel and gasoline engines.
Choose between Mobil 1TM Turbo Diesel Truck or Mobil Delvac 1TM ESP if your diesel engine needs an oil that complies with CK-4 requirements. Notably, we do not contrast motor lubricants designed for gasoline-powered vehicles with those for diesel engines.
Why are there different numbers in 5W-40? The figures represent the oil’s weight and thickness, or viscosity. When it’s cold, motor oil thickens; when it’s hot, it thins. The first value represents the oil’s viscosity when it is cold, while the second number represents the viscosity when it is operating temperature.
Choose the product that best suits your needs by comparing the many degrees of protection that each one of these offers.