Full synthetic SAE 5W-40 motor oil from Valvoline for European vehicles, 1 quart (Part No. VV966)
In This Article...
Why is the oil light on even after I changed the oil?
If your oil light continues to illuminate even after changing the oil in your engine, you should examine the sensor to rule out a faulty sensor as the root of the problem. The oil pump might become clogged with dirt and other debris, leading the sensor to mistakenly report oil problems. Although changing the sensor is pretty straightforward, you should take your car to a qualified mechanic if you don’t feel confident doing it yourself. Low oil pressure is the following typical reason. Your oil light will turn on if the oil pressure drops below 5 pounds per square inch. You should check the oil level even though this shouldn’t happen after an oil change because you never know.
Even after an oil change, the final common cause of a lit oil light is perhaps the most troublesome. Numerous engine problems might result from the oil pump not circulating enough oil to maintain the engine’s parts lubricated and operating as intended. Parts do wear down over time, even though getting oil changes at regular intervals should prevent this issue from happening.
Does oil life reset on its own?
How to Reset: As part of the servicing, authorized Honda dealers will automatically reset your Maintenance Minder System. However, you must manually reset the oil life indicator if you execute the oil change yourself or have it done someplace else.
What does Volkswagen’s oil service mean?
When the oil service light illuminates while you are driving, it indicates that the oil pressure in your car’s engine has decreased. When an engine is running, its parts normally need a steady flow of oil to stay oiled. Moving forward while this problem persists could seriously harm your car’s engine. When you notice the oil service light flashing, take the essential steps to protect your car.
Pulling over to the side of the road and turning off your car’s engine are two things you can do. Afterward, use a car diagnostic tool with a reset feature to identify the cause of the oil light and, if necessary, clear the codes. Otherwise, make a call to the auto repair professionals who will take care of the problem. Avoid letting your engine run dry for an extended period of time as this can harm your engine.
Use the dipstick to check the oil level once you have safely stopped your vehicle on the side of the road. A dipstick is typically found in the engine compartment; remove it, and then use a napkin or rag to clean the oil off the indicator. If the oil level is low after wiping out the dipstick, check it again. It shows low engine oil if it is below the full line.
If the level is off, search for any leakage hints. If the oil level has drastically reduced, the car may be leaking, or the oil may have been burned off by the engine as a result of an internal leak. If oil is flowing down, either the oil filter was not securely fastened or the gasket has broken.
If there isn’t any leak, there must be an issue with the oil pressure. If the oil light has come on and the oil level is low, top it off and check it again. Use the appropriate oil, and fill the tank until the dipstick indicates that it is full.