Many motorists choose to perform their own vehicle maintenance, which includes oil changes. However, the VW service light doesn’t simply go out after you’ve finished this activity. We have some good news for you if you just finished performing your own oil change: most modern models make it rather simple to switch off the service light. Don’t just switch off the service light because it’s upsetting you; have your car serviced regularly instead!
In This Article...
How to Reset Your VW Service Light by Model Year
2006-2015:
2000-2005:
1993-1999:
1990-1992: A scanner must be used at your neighborhood Volkswagen dealership or service facility to reset your Volkswagen service button.
On a Jetta, how do you reset the dashboard?
4: A notice requesting your permission to restart the oil change service should display. By releasing the 0.0 button and pressing it once more, you can confirm that you have.
5: After the “Service Was Reset” message appears, wait for it to go away before turning off the ignition.
The process for turning off the service light is identical on a number of contemporary Volkswagen models. The VW Passat, Jetta, Tiguan, and other models should all function using the procedures below.
2: Start the ignition while holding down the 0.0 button on the instrument cluster.
3: To access the reset feature, let go of the 0.0 button and press the hour and minute button.
4: After a brief delay during which the display returns to its initial state, turn off the ignition.
5: The service light ought to be off after waiting at least ten seconds before starting the engine again.
After changing the battery, how do I reset the Volkswagen computer?
To start with, you should determine whether the immobilizer is the issue. To do this, start your Volkswagen’s batteries and check to see whether your dash’s immobilizer warning lightmost likely in your speedometeris flashing. It ought to resemble the silhouette of an automobile with a key inside.
If it is flashing, the immobilizer is no longer attached to the system. You must do a cold reboot in this situation, which may be done by following these steps:
- Severing the two battery cables
- Tap the two cables collectively.
- Disconnect the cords for fifteen minutes.
- Reattach the battery’s cords.
You can also attempt the following alternate technique to get your key to self-reprogram if the previous one doesn’t work:
- Make sure a charger is being used to charge the battery.
- Keep the battery charged and the engine off while leaving the key in the ignition for one hour.
Bring your automobile to the closest Volkswagen dealership if nothing else works, and have the immobilizer resynchronized with your vehicle there.
How can a VW’s check engine light be reset?
Your Check Engine Light Can Be Reset
- Put on gloves and safety eyewear before turning off the ignition.
- Find the automobile battery’s negative terminal.
- To remove the negative terminal nut, use a wrench.
- Reattach the negative cable, then use your wrench to tighten the nut once more.
Will a VW check engine light automatically reset?
If the problem or code that caused your VW’s check engine light to come on is resolved, it will typically turn off by itself. For instance, if a loose gas cap was the reason your check engine light came on, the light will automatically switch off once the gas cap is tightened.
What do the caution lights on a VW mean?
Yellow indicator lights are an indication that there may be a problem, and the color is trying to warn you to drive carefully. Make sure to get your car checked up by a Volkswagen service professional as soon as you notice a yellow warning light.
1. ABS
Possible problem with the anti-lock braking system. There is an ABS issue if the brake system light comes on.
AdBlue Level 2.
Low AdBlue level; top off immediately
3. AdBlue System Issues
Possible AdBlue system problem.
5. Bag Air
Airbags have been deactivated or the airbag system is malfunctioning.
7. Defects in Automatic Transmission
possible issue with the automatic transmission
8. Broken brake light bulb
There are one or more burned-out brake lights.
9. Brake Pad Wear IndicatorBrake pads may need to be replaced because they are low on wear or excessively worn.
10. Bulbs that fail
Solid light: a burned-out bulb; blinking light: perhaps a problem with the headlight system.
12. Pre-Glow of a Diesel Engine
Solid light indicates that the diesel engine pre-glow is on; blinking light indicates a potential problem with the diesel engine.
16. Check Engine / Engine Problem
Possible engine problem.
Potential engine problem with the electric power control system.
18. Blinking light: system triggering event; ESP/ASRSolid light: Electronic Stabilization Program or Traction Control are deactivated.
Particulate Filter 19.
See the owner’s manual if the diesel engine filter is blocked by something.
Gasoline CapThe fuel cap is missing; it should be replaced.
Immobilizer 23
engine starting using the wrong key.
24. One or more of the license plate’s bulbs are burned out.
Low Fuel LevelRefuel as soon as possible.
Oil Pressure 26.
No oil pressure exists. Since it is technically a red light, you should immediately come to a complete stop in a secure location and turn off the engine.
Low Oil Level 27
Check oil immediately because it is low. Oil sensor issues could exist even if the oil level is not low.
29. Failure of the Rain Sensor
Possible rain sensor problem. Start the engine, then restart it. If the light is still on, bring it in for repair.
System for Steering
Stop the car because of a steering system issue. Solid signal: less power steering assistance. blinking light: issue with the steering system.
Tire pressure monitoring at 32.
Low tire pressure. Possibly a system issue as well.
33. Low Washer Fluid
Refill washer fluid as soon as possible.
How do you stop the check engine light from coming on in a 2019 Volkswagen Jetta?
If the problem or code that caused your 2019 VW Jetta’s check engine light to come on is fixed, it will often turn off by itself. For instance, if a loose gas cap was the reason your check engine light came on, the light will automatically switch off once the gas cap is tightened.
How can my EPC be reset?
We encourage you to visit a nearby Volkswagen repair shop to resolve the EPC light issue on a VW. They will be able to identify the issue in the repair shop.
Your engine sensor should be changed or reset as the first option for you to try in order to see if the EPC light is turned off.
Try the following if you wish to resolve the EPC light on your own: first, start the vehicle normally. Once the engine has started running a second time, depress the gas pedal all the way. This works in some situations.
Additionally, it is a good idea to examine the throttle body’s electrical connections. After you clean the connector, the Volkswagen EPC light might go out.
How long does it take an automobile computer to restart?
Until the car has been driven far enough for the computer to analyze the different systems and sensors, the readiness monitors will be in place. Depending on the vehicle, the length of time may change. The distance it takes for all computer monitors to completely reset can occasionally be up to 100 miles.
Does anything need to be reset following a battery change?
Yes. Your settings will need to be reset. The dealer will typically do it for free, but no guarantees can be made. If you replace a battery and anything was connected to the old one, such as the hose you mentioned, you must reinstall it. Everything is always put back on the same way I took it off. If you find yourself in need of help, think about calling YourMechanic. One of our mobile specialists may visit your house to service your batteries and make sure it was installed correctly. Thanks for reading, and good luck.
Do I need to reprogramme my car after a battery change?
No, usually you don’t need to reprogramme your car following a battery change. But if your vehicle has an onboard computer, you might need to reset it.
In addition, This implies that you are not need to purchase a BMW battery if your car’s battery has to be replaced and any replacement battery that fits your car will work. The car’s computer will automatically alter the charging procedure if you purchase a BMW battery, though, to ensure the battery lasts as long as possible.
Should I restart the computer in my car?
response given by It’s not actually required to reset your engine control unit (ECU) after altering your engine. However, you may reset your ECU to rectify a broken check engine light or return your vehicle to its factory settings.
What changes does a hard reset make to your car?
Even though they both appear to be able to eliminate the codes, a hard battery reset won’t take the place of a useful diagnostic tool. However, combining the two can save you a ton of time and effort in trying to identify the source of your electrical problems.
By performing a hard reset, you effectively start over. Once you’ve completed this, scan the car to look for any problems. If there is a hard code, it will either come back right away or after a certain number of kilometers.
It is extremely comparable to restarting your computer and running crucial malware removal software to assist you in getting rid of viruses and spyware. The similar idea can be used with automobiles. Both are useful in their own right, but when utilized in tandem, things can go forward more quickly.
Universal scan tools will work with the majority of automobiles. A less complex and more affordable scanner can assist with troubleshooting the check engine, but if other computer modules aren’t operating properly, you’ll need a more expensive scanner. Here is a list of my top scanners.
The specific error codes will be displayed by a diagnostic scan tool. You may find out exactly what that code signifies in detail and potential fixes by conducting a quick online search for it. On the scanner itself, certain scan tools provide service bulletins and recommendations, which is quite helpful.
Why is the check engine light on on my VW Jetta?
Jetta Volkswagen Check Engine Usually, a serious engine misfire that causes unburned fuel to escape into the exhaust system is indicated by this blinking light. There, it can quickly increase the catalytic converter’s temperature to the point where damage is likely, necessitating a costly repair.