This is the reason your Volkswagen won’t start after a battery change. You will eventually need to replace the battery in your Volkswagen because batteries do degrade over time. You might notice that your car won’t stay charged or that the lights are dimmer. These can indicate a battery that is about to fail. The process of changing a battery is relatively straightforward, but if your car has any kind of alarm or anti-theft device, make careful to use the computer memory saver to store your settings before doing so. The alarm systems won’t operate if you don’t start again and reprogram them.
In This Article...
After replacing the battery, how do I reset my VW?
To start with, you should determine whether the immobilizer is the issue. To do this, start your Volkswagen’s batteries and check to see whether your dash’s immobilizer warning lightmost likely in your speedometeris flashing. It ought to resemble the silhouette of an automobile with a key inside.
If it is flashing, the immobilizer is no longer attached to the system. You must do a cold reboot in this situation, which may be done by following these steps:
- Severing the two battery cables
- Tap the two cables collectively.
- Disconnect the cords for fifteen minutes.
- Reattach the battery’s cords.
You can also attempt the following alternate technique to get your key to self-reprogram if the previous one doesn’t work:
- Make sure a charger is being used to charge the battery.
- Keep the battery charged and the engine off while leaving the key in the ignition for one hour.
Bring your automobile to the closest Volkswagen dealership if nothing else works, and have the immobilizer resynchronized with your vehicle there.
Should I reprogramme my car after changing the battery?
Your key fob needs to be reprogrammed if the battery was recently changed in order for it to continue operating as intended. The process is often straightforward and may be finished in a few minutes, though it may vary depending on the make and model of your car. Consult your car’s owner’s manual or get help from a local automotive locksmith if you’re unsure how to reset your key fob.
How can I remove the battery from my car?
Negative comes after the positive. Disconnect the negative cable from the old battery first, followed by the positive. Positive and negative connections for the new battery should be made in reverse order.
It can be difficult to remember which terminals to detach and which to rejoin while changing your car battery. But it’s crucial to connect them in the proper sequence.
Remember to first unplug the cables from the negative terminal, which is typically black and marked with a minus (-), before unplugging the cables from the positive terminal, which is typically red and marked with a plus (+). Always use caution when touching a metal object to both of the battery’s terminals at once.
Once the connections are disconnected, release the clamps holding the battery in place and carefully remove it out of the battery tray.
Make sure the wires and both terminals are rust-free before installing the new battery. You can clean them with water, baking soda, and a wire brush if they are rusted.
After that, set the battery’s terminals correctly on the battery tray and drop it onto it before clamping it. Connect the new battery now by connecting the positive terminal first and then the negative terminal in the reverse order. Ensure that the battery is properly fastened.
Does VW require unique batteries?
Genuine VW Batteries are uniquely crafted to satisfy the precise power needs of your sophisticated VW model as well as the technological requirements of today’s European-engineered cars, unlike any other battery on the market.
Does AutoZone replace batteries?
Batteries are not just sold at AutoZone; in most situations, they may also be installed there.
It might be time for a new battery if the one in your car is dead, won’t hold a charge, or won’t start.
Customers may obtain the parts they need for the required repairs by using the store’s knowledgeable staff, who can also assist them in figuring out what’s wrong with their car.
When ought a Volkswagen battery to be changed?
The battery in your car is crucial since without one, it won’t start. Unfortunately, it’s simple to overlook our batteries until there is a problem, which can leave us stranded. We examine the frequency of battery replacement for Volkswagens as well as the telltale indicators of a battery that may require replacement soon.
The basic rule when it comes to replacing the battery in your car is that you should do so every five years, however occasionally you may need to do so sooner. There are a few indicators that could appear before you need a new battery even if there may not always be a visible warning that your battery is ready to die.
Warning Signs You May Need a New Battery
There are a few warning signals to watch out for to determine whether your car’s battery may be failing. These warning symptoms are not always present before the battery dies; sometimes it just does; nonetheless, there are a few warning signals to consider in order to be ready and aware of what to expect.
How much does a Volkswagen Jetta battery replacement cost?
A new battery for a Volkswagen Jetta typically costs between $238 and $251. The cost of labor is expected to be between $51 and $64 while the cost of the parts is $187. Taxes and other fees are not included in this range, nor are your particular model year or geographic area taken into account.
Should I reset the ECU after changing the battery?
Great inquiry. You can use an OBD-II scanner or unplug and replug the positive battery terminal to reset the ECU.
The bolt on the battery terminal needs to be loosened using a tiny wrench for the first technique. Just unplug the wire and allow the vehicle to sit for at least five minutes. After that, secure the cable again and tighten the clamp. Check to verify if the dashboard lights are still present after starting your car.
An OBD-II scanner is required for the second technique. It should be connected to the OBD-II port under the steering wheel of your car. Error messages will be presented. The option to remove the errors from the system will then be presented to you. Start your automobile after that to see if the error lights are still on.
Remember that if you continue to have error symptoms after changing your battery, it may indicate that your ECU is having trouble or that there is another problem entirely. Because the majority of ECUs are self-learning, they should reset once they recognize that a fresh battery has been placed.
If you’re stuck, ask a mechanic for help with the diagnosis. You should expect to pay $50 to $150.
Don’t let having a car add to your stressowning a car is already stressful enough! Use Jerry to find a cheap policy with top-notch coverage. You can reach one of our helpful agents via text or phone. If you want to search for a new coverage or compare rates, the Jerry app is quick and simple.
Why won’t my car start now that the battery has been changed?
Your alternator’s malfunction is the most likely cause of the problem. That is to say, even though your battery is in excellent condition, the alternator isn’t charging it. Your alternator is probably broken if your car won’t start even with a fresh battery.
How long does it take an automobile computer to restart?
Until the car has been driven far enough for the computer to analyze the different systems and sensors, the readiness monitors will be in place. Depending on the vehicle, the length of time may change. The distance it takes for all computer monitors to completely reset can occasionally be up to 100 miles.