A customer rings in to report losing one or more of their VW’s keys. We inform the purchaser that they must provide documentation proving they are the legal owners of the vehicle. The vehicle will then need to be towed to the dealer.
We must program the new key to the car once the key is received. A new Volkswagen key, remote, and programming will set you back approximately $300.
So why on earth do Volkswagen replacement keys cost $300? My best assumption is that a top-secret material is used to make the little mechanism that allows the key to flip out. possibly a form of turbonium? Okay, that is certainly not the case. Before we discuss why it is so expensive, let’s first discuss
In This Article...
Can an old VW key be reprogrammed?
I’m here. As long as the key is the same for each vehicle, you can reprogram a key fob to work with that vehicle. In this situation, if the key can open the doors, you would need to take the following actions:
- Turn the key to the ON position after inserting it into the ignition.
- the driver door with the key.
- In the OFF position, turn the key.
- Push the lock and unlock buttons on the key fob simultaneously with locking and unlocking the door with the key – (do this 3 times).
- After unplugging the vehicle’s battery wires, wait 30 seconds, then reconnect them (reset computer).
- While simultaneously using the remote and your hand to unlock the door, turn the key to the ON position.
- Locking the door simultaneously with your hand and the remote requires turning the key to the ON position.
- Remove the ignition switch’s key.
- Try using the remote to unlock the doors while the door is closed after taking the key out of the lock.
- Put the key in the ignition switch and attempt to start the engine if the doors will lock.
- The key fob’s battery should be removed and then replaced (unless you put in a new battery)
After completing these procedures, the key fob has been successfully reprogrammed to your car if the engine starts. If the key does not lock the doors or start the engine, it may be completely different, and you will need to get a new key. Seek out a specialist, like one from Your Mechanic, if you require more help with your keyless entry system.
Do I need my original Volkswagen car key in order to get a new Volkswagen key?
There is always a way to replace a Volkswagen car key successfully when you call a locksmith. Even if you don’t have a spare car key for a classic Volkswagen model, the locks can be broken open so a key can be produced from scratch. The better if you have a spare, but a skilled auto locksmith can create a new Volkswagen key.
Due to the ability to cut a new key from code using the VIN, replacing a Volkswagen car key nowadays is more quicker and simpler. In the case of replacement Volkswagen key fobs, this data is accessible via hacking into the onboard computer of the vehicle. The essential element is that a new key can be created without the original Volkswagen key, regardless of the type of key or Volkswagen you own.
What is the cost of Volkswagen car key replacement?
Volkswagen automobile key replacement services start at $120. This is a standard initial pricing that we maintain across all replacement vehicle key situations. The final cost to replace a Volkswagen key will depend on a variety of factors, of course. The price of car key duplication varies significantly depending on the model and year of the vehicle.
How long does it take for Volkswagen car key replacement?
Replacement of a Volkswagen automobile key typically takes 20 minutes. Parts might need to be ordered if a new Volkswagen key is needed for a vintage vehicle or for any type of unusual circumstance. Do not worry; the ordering procedure will be handled expertly. You won’t have to worry about the risks associated with aftermarket keys. A locksmith can produce you a new, functional key when they order a replacement for a Volkswagen key.
How is a car key with a chip programmed?
There are a few manufacturers who will let you program a single key even if you don’t have a working key. Remember that you’ll still need to have the key cut to suit the ignition, which necessitates presenting the locksmith with evidence of ownership.
Nevertheless, it is far easier to do this than to program a second or third key:
- In order to test your new key, start the engine.
- Turn the ignition to the on position after inserting the key. Just the electronics, leave the engine off.
- After 10 minutes and 30 seconds, switch off the light by turning the key.
- Thirdly, repeat the procedure.
- Restart the key, then wait another 10 minutes and 30 seconds before turning it off once more.
- To program the key, turn it back to the on position.
DIY Key Fob Programming
You might be able to program a replacement yourself, depending on the make and type of your vehicle.
The steps for programming a key fob yourself can differ: Owner’s manuals from certain automakers include instructions. In many circumstances, information can be available online. The problem is that in order to complete the process quickly or at all, you might require two functional key fobs.
Therefore, it is wise to acquire and set up an extra remote before you require it. Additionally, it’s a wise move because most used-vehicle buyers, particularly auto dealers, would pay extra for a car that has at least two functional sets of keys or key fobs. Therefore, having a spare key will not only be useful when you need it, but it will also benefit you in the long run.
After-Market Key Fobs
You may be able to buy an after-market key fob via a locksmith or online if your automobile is more than five years old. These sorts of fobs range in quality, but they are less expensive than other options.
Locksmith
If you have the option of receiving your replacement key from a locksmith or the dealership, the latter may be less expensive. Before making a choice, be sure to inquire about prices with your nearby vehicle dealership.
Without a key, how do you start a Volkswagen Jetta?
To start an automobile without a key fob, follow these steps:
- Hold your broken key fob against the car’s steering wheel.
- Find the start button that is close to your gear knob while holding your key fob against the steering column.
- Holding the key fob against the steering column, press the start button.
How is a VW transponder key programmed?
You need one primary key that functions properly in order to program a key fob to your VW vehicle. This key will act as the new key’s “trainer.” This is how it goes down.
- Put the key that you want to program into the ignition first. then move the vehicle to the “on course. Do not start the car or turn the motor on.
- After that, exit your Volkswagen and lock the driver’s door. Put the main key into the door lock using your hand. After that, manually lock the door by turning the key to the right. Once the door is locked, take the key out.
- Press the primary key while holding it “Using the fob’s unlock button. After at least a brief delay, hit the “Repress the unlock button.
- Turn the ignition on and open the driver’s door “out of place. Take away the new key. Your vehicle needs to be programmed with the new key.
- Test the new key by locking the driver’s door and closing it. The steps should be repeated if not.
Replace the batteries inside the key fobs
If you haven’t changed the battery in the key fob(s) in a while, do so now before continuing. When you try to reprogram a key fob with a defective battery, it can be a real pain. The batteries are often inexpensive and simple to replace. If you are unsure how to change them, consult your owner’s manual.
Get inside the car
With your car keys and the remote in hand, go in the driver’s seat and lock all the doors. Closing the doors is crucial because if you leave one open, it can disrupt the procedure.
Turn on the ignition
Once seated, turn the key to the “On” position in the ignition to turn the electrical systems on. Do not start the engine and double-check that the ignition is not in the radio mode.
Press the lock button on the remote key
Turn the key back to the “Off” position while holding down the lock button on the fob. At least three times, go through this process, finishing with the key in the “On” position. This notifies your electronic control units that the signal is coming from your key in the ignition and does save the info later. How to Start & Unlock a Car With a Dead Key Fob
Listen for a Lock Sound
You will hear the lock sound once you have completed the aforementioned steps. You have now accessed the programming mode, as indicated by this. Press the lock button once more in the following five seconds to complete the programming.
Programming additional remotes
If there are other remotes, program them successfully by pressing the “Lock” button within 10 seconds after entering the programming mode.
Step out from your car and test the result
Close all doors as you exit the vehicle and take your key fobs with you. Test the functionality of both unlocks with each of your key fobs that were programmed.
Why won’t my VW key turn?
It’s easy to replace the battery in your key fob if it’s entirely dead, but it still needs to be reset if the light is blinking. Only your master key will work for this, but it’s quick and easy to do:
- For one second, press and hold the lock or unlock button. The car should continue to be locked.
- You may unlock and lock your Volkswagen with the master key.
- Your key fob should automatically reset.
Of course, you could need a new key fob if the old one is broken. Fortunately, we can set you up with a new key that has been programmed for your VW at our service center.