My iPhone would suddenly display a brief message saying “reading USB device” followed by the error message “No playable files available” when I inserted it into the car’s USB port. Even if a USB device was obviously plugged in, the screen would then change back to “insert a USB device.”
The fundamental procedures for troubleshooting this problem are listed below:
In This Article...
Restart iPhone
Good day IT Have you attempted turning on and off once more? This is always the first thing to do when a computer or mobile device is having a system issue. Simply switch it off and back on. Move on if this doesn’t work.
Try a different cable
Your wire can simply be damaged. Use an Apple or Apple compatible USB data cord when trying a different one. You can rule out this being the problem if another cable has the same mistake. The original cable is the problem if your gadget functions with another cable but not the original.
Connect your iPhone to a MacBook or Computer with the USB cable
You may rule out the cable and the iPhone’s lightning port as a problem if you can connect your iPhone to a MacBook or computer using a USB cable and the MacBook or computer can read the device and transfer data. If your MacBook or computer is unable to read the device or transfer data, the problem may be with your iPhone’s lightning connector.
Ensure the car can play iTunes files via USB
Simply said, this is a foolproof way to do away with the cable, lightning port, USB port in the car, and iPhone OS altogether. Go to Phone > Source > USB on your Jetta’s console to see if your car can see and play your downloaded iTunes files. If it can, your cable, iPhone’s lightning port, your car’s USB port, and all of these are in good operating order.
Ensure your car shows up under iPhone CarPlay
Go to Settings > General > CarPlay on your iPhone. If your vehicle is still displayed here and you are still unable to connect, choose the vehicle before choosing Forget This Car. Afterward, unplug the USB cable from the car and re-plug it in to restart the connecting process.
Congratulations if your car wasn’t included here or if it is listed but you are still experiencing problems with it. You are where I was before I realized there was a problem!
How do I activate Volkswagen CarPlay?
Volkswagen Apple CarPlay How-To Guide with a USB Cable
- Connect your iPhone to your Volkswagen using a USB cable that has been approved.
- Select Connect to check your Apple CarPlay connection on your Volkswagen touchscreen.
- To grant Volkswagen Apple CarPlay access to your iPhone, select Allow.
Why won’t my VW Polo function with Apple CarPlay?
Verify that CarPlay is turned on on your iPhone. Re-enable CarPlay since a number of settings may be interfering with it. Connect it to your car by going to Settings -> General -> CarPlay.
However, if you have iOS 14 and have switched off CarPlay in Screen Time, Go to Settings -> Screen Time -> Content and Privacy Restrictions -> Allowed Apps.
Why doesn’t VW CarPlay function?
Ensure that CarPlay is on even when the door is locked. CarPlay won’t operate if your phone’s screen is off if it isn’t enabled when locked. To fix this, navigate to Settings > General > CarPlay and choose your vehicle from the list of connected devices. Turn on Allow CarPlay While Locked after that.
How can I get Apple CarPlay to function again?
After attempting several connections, if CarPlay still doesn’t function, see if the CarPlay logo appears on the display in your car. Restart your car and iPhone if necessary.
Depending on the model of your iPhone, follow these instructions to restart it:
- iPhone SE (1st generation) or iPhone 5 models: To turn the iPhone on and off, press and hold the top button.
- Models of the iPhone 6, iPhone 7, and iPhone 8: To turn off and on your device, press and hold the side button.
- iPhone X or more recent models: Hold down the volume and side/power buttons while dragging the power slider to the right. Wait a few seconds for your phone to completely switch off. When the Apple logo displays on your screen, press and hold the side button for 3 to 5 seconds before letting go.
Note: Refer to the owner’s manual for your car for instructions on how to restart the infotainment system. Try utilizing CarPlay with your iPhone once again after restarting the devices to see if the issue still exists.
Bluetooth Issue with CarPlay on Your iPhone
If you notice that your CarPlay is not operating as it should, Bluetooth may be a serious problem. In this situation, your first course of action should be to turn off Bluetooth on your iPhone, restart the device, and then test out CarPlay once more to see whether it works.
Check your Bluetooth settings as well to determine if any outdated connections are interfering with CarPlay.
Force Restart Your iPhone
A software update bug is one of the most frequent causes of Apple CarPlay not functioning. Your iPhone can be restarted to resolve this issue. Take these actions:
- Pressing and holding the power and volume buttons at the same time for several seconds.
- Release the buttons when the “slide to power off” screen appears, then drag the “power off” slider to the right.
- When the phone has completely shut down, restart the iPhone by pressing and holding the power buttons.
Try using CarPlay once more after restarting the iPhone to check if it still doesn’t work. Try the following approach if the issue does not disappear, though.
Reset and Update Your Vehicle’s Infotainment System
The “CarPlay stops working” problem might occasionally be brought on by the infotainment system in your car. Reset and upgrade the system in this situation. Turn off and restart your vehicle first.
The system ought to be reset and restarted. This may not always be the case, though, as switching off the automobile just puts the system into sleep mode.
Make Sure CarPlay is Enabled
Sometimes we forget to switch on CarPlay and accidentally turn it off. Make sure CarPlay is enabled for this reason.
- Activate Screen Time > Settings > Privacy & Content.
- After that, scroll down the screen and disable any CarPlay limitations that are listed.
Why isn’t the touch screen on my Volkswagen working?
The first thing you should try if you have a broken infotainment touch screen in a Golf is a hard reset.
Press and hold the power button for approximately 10 seconds to accomplish this. This ought to restart the computer. Some Golf owners said that after doing this, the issue was resolved.
Others have had little success. They decided that bringing their Golf in to be examined was the most sensible course of action. Many dealers would simply swap out the head unit or screen and hope that nothing else would go wrong.
Don’t replace your touch screen or head unit right away if resetting the system didn’t fix the issue for you. There is still one last thing you can do.
Why is my Apple CarPlay not working although my phone is charging?
You must use Bluetooth or USB to link your device and vehicle. If you are using a wireless connection, you must make sure your phone is not in Airplane Mode. All wireless connections are disabled when in airplane mode. Additionally, in order to use CarPlay, Bluetooth and cellular data must be enabled. To repair it if you are already connected, switch between Bluetooth and cellular data.
If you’re utilizing a wired connection, inspect your USB cord for damage. Connect using a fresh USB cable. Make sure the USB is inserted into the proper port. Additionally, try replugging the USB to access CarPlay while connected to a car.
Should CarPlay be updated?
You don’t need to upgrade your car’s CarPlay. There is no need to update CarPlay firmware because Apple provides updates to CarPlay via software updates for your phone or device. Your car’s infotainment system, which is Apple compatible, is how Apple CarPlay functions.
As a result, CarPlay updates are distributed through your Apple devices rather than your car because Apple does not make your car.
Also, you must keep your gadgets up-to-date to make sure you have the newest features. Furthermore, these upgrades frequently include patches to remedy software issues that Apple has identified.
Is there a fee for software updates at VW?
Volkswagen announced a significant software upgrade for the ID.4 and other EVs on Tuesday that will change charging, driver assistance technology, and a number of other car functions.
According to a press statement from VW, the over-the-air (OTA) update for the ID. Software 3.0 will be free for existing vehicles and deployed in new vehicles.
New driver-assist capabilities are included in the upgrade, such as automated lane changes and automated parking. Updated as Travel Assist with Swarm Data, this feature essentially combines adaptive cruise control and automated lane centering. To increase functionality, it makes use of “swarm data” collected from other vehicles.
VW is also implementing a Battery Care Mode that restricts the state of charge to 80% and will permit ID-family EVs to DC fast charge at up to 135 kw (up from 125 kw previously). Charging stations are incorporated into the routes that the navigation system generates thanks to a new route guidance feature.
One update that will be particularly well-received is the route advice. It was particularly difficult to locate VW’s own Electrify America stations with early ID.4 cars.
A variety of infotainment improvements are also included in the upgrade, including better voice recognition and data additions for the optional augmented reality head-up display.
These are a lot of the improvements we wished the ID.4 had when it first arrived, so we appreciate that they have been made available via free over-the-air updates.
As part of ongoing hardware upgrades, the ID.4 also receives higher range ratings for 2022. These additional changes are brought about by OTA updates. However, not all of the new driver-assist capabilities are anticipated to be offered in the US.
Volkswagen (VW) has intimated that future EV models may become “software-based products,” with features that buyers can activate “on demand,” even if it doesn’t plan to charge for OTA updates on these MEB vehicles.
Deliveries of ID.4 vehicles made in Tennessee are scheduled to begin this fall, and Volkswagen this week declared a renewed commitment to software development carried out in the United States.
According to a press statement from the company, VW wants to “strengthen the company’s digital footprint in America” and add new software capabilities like Plug and Charge to the ID.4 this year as part of a $7.1 billion investment in North America.
Does iOS 15.2 address CarPlay problems?
Early this month, Apple released iOS 15.2.1, which included several eagerly awaited changes. With this update, CarPlay bugs affecting well-known apps like Google Maps and Waze were finally fixed.
However, it turns out that updating to this new iOS version entirely destroyed CarPlay for some customers. Several people have explained this on Apple’s support forums, saying that the software is no longer accessible in their cars.
At first inspection, it appears that the bug only impacts BMW vehicles. Some allege that CarPlay has entirely stopped working, while others indicate that the app starts but they are unable to access the app screen.
Since the most recent iOS version appears to be the problem, theoretically the only solution is to downgrade, which Apple no longer permits, until a complete remedy is released.
A solution for utilizing CarPlay, according to someone, entails activating only the apps that are shown in the dashboard view.
The same problem affects me. I discovered a temporary workaround. The Calendar, Maps, and Music are all displayed in one window when I go to the CarPlay main menu. They claim that when I choose Music from there, I return to the Music app.
Users affected by the flaw are left with little choice but to wait for Apple to release a cure because, as is customary with the firm, the Cupertino-based tech giant has kept a total lid on any prospective fixes.
The good news is that a new iOS version is currently available in the RC channel, which suggests that the public launch for production devices may occur as soon as the next week. However, there is no certainty that a remedy for this problem will be included, so we can only hope that Apple is already aware that some CarPlay customers are experiencing this behavior as a result of the update to iOS 15.2.1.