- Start up your VW.
- Look for new devices in the Bluetooth menu on your phone.
- Following that, the infotainment system in your car will display a connection request.
- On the infotainment screen, click “Connect.”
- Press “YES” on the screen after making sure the same PIN is displayed on your phone.
In This Article...
The Volkswagen Jetta and CarPlay pairing process
Volkswagen Apple CarPlay How-To Guide with a USB Cable
- Connect your iPhone to your Volkswagen using a USB cable that has been approved.
- Select Connect to check your Apple CarPlay connection on your Volkswagen touchscreen.
- To grant Volkswagen Apple CarPlay access to your iPhone, select Allow.
Why won’t my phone and VW connect?
When you are first trying to connect the device, one of the more frequent VW Bluetooth difficulties occurs. Make sure your equipment is Bluetooth capable firstnot all electronics have it.
If not, connection issues arise because your Volkswagen’s system is unable to connect with the device and decode it. When connecting repeatedly yet unsuccessfully, your device’s firmware is probably at fault. You will need to go back to the store where you bought your phone to resolve the problem because this is a regrettable trend with smartphones.
Why won’t my iPhone pair with the Bluetooth in my car?
- Turn off Bluetooth by going to Settings > Bluetooth. Turn on Bluetooth once more after waiting for roughly 5 seconds.
- For more details on how to pair with a Bluetooth device, consult the owner’s manual that came with your automobile. The majority of vehicles demand phone setup on the dashboard.
- Try renaming your device if you’ve had many phones plugged into your car stereo: Navigate to Settings > General > About > Name and enter a new name. Then attempt reestablishing contact.
How can I reset the Bluetooth on my Volkswagen?
- Select the phone you wish to delete by finding it, choosing it, and then pressing “ok” on the steering wheel.
- After that, switch off Bluetooth and turn off your device.
- The Volkswagen’s ignition should be turned off.
- Disconnecting the gadget and attempting a new pairing are two of the best ways to get your Volkswagen’s Bluetooth technology working once more. How to do it:
- Restart the Volkswagen and the phone. Turn on Bluetooth on your phone and try pairing it with your Volkswagen once more.
- Click “ok” after navigating to “remove” in the choices list.
- To view a list of installed phones, click “users.”
- Using the buttons on the steering wheel, access the Phone or Bluetooth option in the multi-function display (the small screen next to the speedometer).
No Bluetooth menu on Volkswagen screen
You attempt to use the controls on your steering wheel to access the Bluetooth menu, but nothing happens. This occasionally occurs, particularly with older Volkswagen cars. Unplugging the cord from the tiny Styrofoam box under the front seat and briefly turning the car on are two solutions (for cars without GPS). After that, restart the Volkswagen by turning off the engine and plugging the cable back in. The Bluetooth menu ought should appear immediately.
Why won’t my car’s Bluetooth connect?
FIX: Ensure that the contacts can sync on your smartphone. Select “Settings,” then “Bluetooth,” and then look for the car that’s having trouble pairing. As soon as you tap the “i” button next to the car, make sure “Sync Contacts” is ticked in every box.
Why won’t Apple CarPlay connect to my Jetta?
My iPhone would suddenly display a brief message saying “reading USB device” followed by the error message “No playable files available” when I inserted it into the car’s USB port. Even if a USB device was obviously plugged in, the screen would then change back to “insert a USB device.”
The fundamental procedures for troubleshooting this problem are listed below:
Restart iPhone
Have you tried turning on and off again, IT? This is always the first thing to do when a computer or mobile device is having a system issue. Simply switch it off and back on. Move on if this doesn’t work.
Try a different cable
Your wire can simply be damaged. Use an Apple or Apple compatible USB data cord when trying a different one. You can rule out this being the problem if another cable has the same mistake. The original cable is the problem if your gadget functions with another cable but not the original.
Connect your iPhone to a MacBook or Computer with the USB cable
You may rule out the cable and the iPhone’s lightning port as a problem if you can connect your iPhone to a MacBook or computer using a USB cable and the MacBook or computer can read the device and transfer data. If your MacBook or computer is unable to read the device or transfer data, the problem may be with your iPhone’s lightning connector.
Ensure the car can play iTunes files via USB
Simply said, this is a foolproof way to do away with the cable, lightning port, USB port in the car, and iPhone OS altogether. Go to Phone > Source > USB on your Jetta’s console to see if your car can see and play your downloaded iTunes files. If it can, your cable, iPhone’s lightning port, your car’s USB port, and all of these are in good operating order.
Ensure your car shows up under iPhone CarPlay
Go to Settings > General > CarPlay on your iPhone. If your vehicle is still displayed here and you are still unable to connect, choose the vehicle before choosing Forget This Car. Afterward, unplug the USB cable from the car and re-plug it in to restart the connecting process.
Congratulations if your car wasn’t included here or if it is listed but you are still experiencing problems with it. You are where I was before I realized there was a problem!
How can I restart my car’s Bluetooth?
The best approach to accomplish this is to turn off Bluetooth on both your smartphone and your car. Remove your smartphone from the infotainment system in your car, along with any history of connected devices. After that, turn off the car and restart your phone while still in it.
How can I pair my automobile with my Bluetooth-enabled phone?
from your phone, pair
- Verify that your car is paired and ready for discovery.
- Open the Settings app on your phone.
- Click Connected devices. Tap “Bluetooth” if you see it.
- To pair a new device, tap. Name of your vehicle.
Why is my iPhone not recognized by my car?
Check to see if CarPlay isn’t restricted if it can’t detect your iPhone. Make sure CarPlay is turned on by going to Settings > Screen Time > Content & Privacy Restrictions, tapping Allowed Apps. Navigate to Settings > General > CarPlay, select your vehicle, and then select Forget This Car. Restart CarPlay after that.
Why can’t Bluetooth locate devices?
Your phone may not be “discoverable” even if Bluetooth is enabled. Therefore, a Bluetooth device that you haven’t yet associated with is unable to view your phone.
Open the primary Bluetooth settings to make it visible to other devices. As long as you are on that screen, Android phones continue to be discoverable.
When Bluetooth is enabled on an iPhone, your phone will be discoverable. When you select Bluetooth under Settings, it will look for Bluetooth devices that are available for pairing.
Install the Latest Updates
Make sure to use the most recent apps and iOS version. Numerous people reported that the issue was resolved for them with iOS 15.3 and later. Your gadget might act weirdly as a result of outdated software. Tap Software Update after choosing General under Settings > Settings > General.
Open the App Store and press your profile picture to update your apps. Then, select Update All under Upcoming Automatic Updates by scrolling down. Verify the GPS and navigational app updates.
Then restart your iPhone after turning Bluetooth off in Settings. If you detect any changes, check.
Route Call Audio to Bluetooth Headset
- Make your go to Settings.
- Enter Accessibility, then select Touch.
- After that, select Call Audio Routing.
- As the preferred location to receive your calls, choose Bluetooth Headset.
While this remedy might not completely resolve the issue for all users, it should drastically lower its incidence. Some calls on your iPhone might still be dropped, but the majority of them should work.
Forget All Bluetooth Devices
- Reset the settings.
- Find the Bluetooth menu by navigating.
- The Bluetooth devices linked to your iPhone should have an Info icon next to them.
- Then select Forget This Device.
This same holds true for the Bluetooth connection in your car. Reconnect your iPhone to your car’s Bluetooth after that.
Reset All iPhone Settings
To make sure they are not interfering with the Bluetooth connection in your car, reset all of your iPhone’s settings. Go to Settings, choose General, and then hit Transfer or Reset iPhone to accomplish this. Go to Reset All Settings after choosing the Reset option.
Remember to reboot your smartphone. You can alternatively remove your SIM card, wait a few minutes, and then re-insert the card. Get more assistance from Apple Support if the problem continues.
Conclusion
Update iOS and all of your apps to the most recent versions in order to resolve the problem where the iPhone 13 disconnects from your car’s Bluetooth during calls. Route Call Audio to your Bluetooth headphone after that. Additionally, unpair your iPhone from all Bluetooth devices and re-pair it with the Bluetooth in your car. Reset all iPhone settings if the problem continues, then get in touch with Apple Support.
Have you ever experienced an iPhone call drop when using Bluetooth in your car? Have you tried other methods of problem-solving? Tell us in the comments section below.