Where Is Vsc Button On 2006 Toyota Highlander

Vehicle Stability Control, or VSC as it is commonly known, is the stability control system used in Toyota automobiles. By lowering or eliminating the power provided to your wheels, stability control aids in the maintenance of traction and control in your vehicle. By automatically providing brake pressure to up to three wheels, it achieves this. The system’s main objective is to keep your car traveling in the direction of its wheels. Since 2012, at least in the USA, it has become a necessary safety requirement. Naturally, VSC OFF denotes that your Toyota’s stability control is turned off.

VSC Light Easy Fix

Depending on the model year of the Toyota, a button with the same icon as the light in your gauges will be located either next to your shifter or next to your steering wheel. When you’ve found it:

  • Ensure that you have come to a complete stop. If you can, put the car in park.
  • For a few seconds, hold down the VSC button.
  • The indicator lights for TRAC OFF and VSC OFF will turn on. Now both systems are off.
  • Once more, press the VSC button. As soon as both lights go out, the systems are back in operation.

If the VSC OFF light is still on, there can be a glitch in your car’s computer or a problem with the VSC system. Bring your car to a Toyota service location near you so a qualified technician can check the codes and identify the problem. Although it is safe to drive your Toyota even with the VSC OFF light on, we advise caution, especially in bad weather.

In Need of Repair?

Bring your car to the Toyota of Arlington servicing facility if you live close to Chicago and need repairs. We can install OEM parts for you because we have access to them. Get a free estimate from our outstanding collision facility if you need body work.

On a Toyota Highlander, where is the VSC button located?

To switch off your TRAC, just push and hold the VSC Off button next to your gear shift. Near your speedometer, look for the TRAC OFF indication light. You will also find your VSC Off indication light here. Simply press the button once more to turn the TRAC back on.

How can the VSC light be turned off on a 2005 Toyota Highlander?

Examine the engine area by opening the hood of the car. Find the air filter box that is positioned to the engine’s left. The air filter box has a square, black exterior and a big intake pipe with ribs.

Examine all of the tiny black vacuum lines that encircle the air filter box. Any loose or disconnected vacuum lines should be reconnected.

To turn off the “VSC” warning light that is illuminated on the dashboard, start the engine and move the car. After driving the car normally, if the VSC light doesn’t turn off, move on to the next step.

Set the parking brake, turn off the engine, and place the car in park. Utilizing a proper size socket, pry open the bonnet of the car and detach the battery’s negative cable for 15 seconds. Resetting the vehicle’s computer and eliminating the “VSC” warning require disconnecting the negative battery connector.

What is a Toyota VSC reset procedure?

Try resetting the VSC light as an easy remedy. Maybe the VSC light was merely intermittently on due to some issue. Try these to try to reset your VSC light:

  • Put the gear in Park and come to a stop.
  • Search for the VSC button. Depending on the model of your car, it may be at the steering wheel or behind it, although it is frequently close to the gear stick.
  • For a few seconds, press and hold the VSC button.
  • The TRAC OFF and VSC OFF indication lights will now turn on, as you can see. The VSC system and traction are both currently disabled.
  • For a second, press the VSC button once more. The systems are now reengaged as the TRAC and VSC lights both disappear.

If this doesn’t solve the issue, you should examine the trouble codes and conduct proper troubleshooting. If you don’t have the skills to do it yourself, take your car to a shop.

What triggers the Toyota Highlander’s VSC light?

The Toyota Highlander is a midsize sport utility vehicle with automatic gearbox, all-wheel drive, and third-row seating with a variety of comfort features. Air bags, a tire pressure monitoring system, and a vehicle stability control system are all standard safety features. The “VSC” light may come on the dashboard as a result of specific car problems interfering with the vehicle stability control system. It could be able to reset the VSC warning light on your car’s dashboard by making a quick fix.


The two P0 codes indicate that the emissions system has a leak. Technically, it might be in the charcoal canister or filler neck, but most of the time it’s just a leaky gas cap. Either a worn-out cap or one that was put incorrectly.

The car is instructed to switch on the check engine light and turn off the traction and VSC by the C1201 code. In essence, this code is responsible for alerting you to an issue when the other two appear. Since they are the ones that created it, fixing the other codes should also repair this one.

How does the VSC light appear?

The slip indicator flashes to show that Vehicle Stability Control (VSC) and/or Traction Control (TRAC) are active in order to restore traction if the system detects that your tires may be slipping. If the light continues to illuminate, there may be a problem with the TRAC/VSC system as a whole.

How much does a VSC sensor repair cost?

Lexus VSC repairs would cost between $200 and $300. But that depends on what made the light come on. Vsc collaborates with the ABS and other auto parts. Therefore, it is best to find the problem before discussing how much to remedy it.

Driving with the VSC light is on is it safe?

Can I drive my car if the vsc light came on two days ago? It won’t hurt you to drive, but the vehicle’s stability control system won’t work.

Why are my traction control light, check engine light, and flashing VSC light on?

You must stop driving the car if the check engine light is flashing. If the engine controller has identified a problem with the engine management system, the check engine light will illuminate steadily. If the defect is likely to harm the catalytic converter, it will flash. The VSC light, which is for the Vehicle Stability Control system, is likely signaling that whatever issue is present, it affects both systems. In other words, you probably only need to do one repair to fix both lights. The warning lights also let you know that the controller has failure codes that can be read by a specialist using the right scanning tools. The diagnosis will be aided by this. If you get in touch with YourMechanic, they’ll send a specialist to your house or place of business to check your car’s controllers for codes and advise you on the best course of action.

Check VSC: Is it really real?

Ignoring the VSC light is a mistake because unless the issue is investigated and the computer scanned, you won’t know what the true source of the issue is. Your traction control system may have a significant problem, and you don’t want to drive a car like this that is unsafe.

It could lead you into trouble and have negative effects. In the best instance, perhaps there is nothing wrong. However, if a circumstance arises that causes anything to occur, it could be quite horrible. That is particularly true if the issue is only a subpar sensor.

Numerous drivers are having trouble with the “check VSC system light.” Additionally, they are looking for a solution to their dilemma. It is a complex issue. But if you intend to fix it and don’t ignore it, it can be done.

If it’s something basic, like a confused computer, you can do it by yourself, as we already stated. Reset it next by unplugging the battery cable or, if it’s a more expensive component, a sensor. When deciding what should be your next step in fixing your car, you will need some professional guidance and opinion. additionally, the components and labor required to fix your car.

You will pay a mechanic some money. However, the outcome will be a flawlessly safe and functional car without any dash lights. And until the next problem, everything will function flawlessly. You can then declare, “Enough is enough, I’m selling this car.”

What does the Toyota Highlander’s TRAC OFF signify?

Indicator with “TRAC OFF” The TRAC/VSC systems may decrease engine power to the wheels if the car becomes stuck in fresh snow or mud. In order to liberate the vehicle by rocking it, you might need to turn the system off. Press and release the button fast to turn off the TRAC system.

How can I reactivate my stability traction control?

On the dashboard, there is a yellow warning light called the Service StabiliTrak Light. When the StabiliTrak Control Module malfunctions, it comes on. You must reset your StabiliTrak Control Module if the Service StabiliTrak Light illuminates. You can accomplish this by unplugging the battery or by forcing a reset. Here is a brief guide.

  • Five times in the space of five seconds, depress the gas pedal. Use the clutch if your car has a manual transmission.
  • Leave the car running for roughly 15 minutes after turning it off.
  • At this point, the light ought to turn off. If it doesn’t, turn off the engine and give it another go after 10 seconds.
  • Don’t start the car; just turn the key to the on position.
  • Until the light is turned off, repeat this step.

A qualified mechanic should be consulted if you require assistance when executing a force reset on your vehicle. Amateurs shouldn’t attempt this since they risk escalating any harm already present in the problem.

My traction control light won’t turn off; why?

The traction control system keeps an eye on the car’s steering and stability and activates when it notices a loss of traction. Electronic sensors are used at each of the four wheels to accomplish this, and they convey steering performance and stability in inclement weather conditions to the Powertrain Control Module (PCM). The traction control system prevents the car from sliding by slowing the engine and selecting which wheel to apply braking pressure to. Together, the traction control system and the anti-lock braking system keep the car stable. The computer makes decisions about how to operate the traction control system or the anti-lock braking system to best control the vehicle when necessary using the data it receives from electronic sensors regarding the rotational speed of each wheel, the horizontal motion of the vehicle, and the vertical motion of the vehicle. When the warning indicator light on the dashboard illuminates, there may be a number of problems present, including faulty steering angle sensors, faulty rotational speed sensors, and faulty wheel speed sensors as well as a steering rack issue. The traction control system may occasionally just need to be reprogrammed. To thoroughly analyze your traction control system, I would advise having a specialist from YourMechanic visit your area.