Perhaps during the flush, a vacuum line was unintentionally torn off.
Examine the engine area by opening the hood of the car. Find the air filter box that is positioned to the engine’s left. The air filter box has a square, black exterior and a big intake pipe with ribs.
Examine all of the tiny black vacuum lines that encircle the air filter box. Any loose or disconnected vacuum lines should be reconnected.
To turn off the “VSC” warning light that is illuminated on the dashboard, start the engine and move the car. After driving the car normally, if the VSC light doesn’t turn off, move on to the next step.
Set the parking brake, turn off the engine, and place the car in park. Utilizing a proper size socket, pry open the bonnet of the car and detach the battery’s negative cable for 15 seconds. Resetting the vehicle’s computer and eliminating the “VSC” warning require disconnecting the negative battery connector.
In This Article...
The Toyota Highlander’s VSC button is located where?
To switch off your TRAC, just push and hold the VSC Off button next to your gear shift. Near your speedometer, look for the TRAC OFF indication light. You will also find your VSC Off indication light here. Simply press the button once more to turn the TRAC back on.
How do you repair the Toyota Highlander’s VSC light?
Vehicle Stability Control, or VSC as it is commonly known, is the stability control system used in Toyota automobiles. By lowering or eliminating the power provided to your wheels, stability control aids in the maintenance of traction and control in your vehicle. By automatically providing brake pressure to up to three wheels, it achieves this. The system’s main objective is to keep your car traveling in the direction of its wheels. Since 2012, at least in the USA, it has become a necessary safety requirement. Naturally, VSC OFF denotes that your Toyota’s stability control is turned off.
VSC Light Easy Fix
How can the VSC light on a Toyota Highlander be fixed?
The stability control system used in Toyota automobiles is known as VSC, or “Vehicle Stability Control.” By lowering or stopping all power transmitted to your wheels, stability control helps your car retain traction and control. This is accomplished by delivering brake pressure automatically to up to three wheels. The system’s main objective is to maintain the direction of travel of your car. Since 2012, at least in the USA, it has been required by law as a vital safety element. Obviously, VSC OFF indicates that your Toyota’s stability control is not engaged.
- Ensure that you have come to a complete stop. If you can, put the car in park.
- For a few seconds, hold down the VSC button.
- The indicator lights for TRAC OFF and VSC OFF will turn on. Now both systems are off.
- Once more, press the VSC button. As soon as both lights go out, the systems are back in operation.
If the VSC OFF light is still on, there can be a glitch in your car’s computer or a problem with the VSC system. Bring your car to a Toyota service location near you so a qualified technician can check the codes and identify the problem. Although it is safe to drive your Toyota even with the VSC OFF light on, we advise caution, especially in bad weather.
In Need of Repair?
Bring your car to the Toyota of Arlington servicing facility if you live close to Chicago and need repairs. We can install OEM parts for you because we have access to them. Get a free estimate from our outstanding collision facility if you need body work.
What location does the VSC system have?
Try resetting the VSC light as an easy remedy. Maybe the VSC light was merely intermittently on due to some issue. Try these to try to reset your VSC light:
- Put the gear in Park and come to a stop.
- Search for the VSC button. Depending on the model of your car, it may be at the steering wheel or behind it, although it is frequently close to the gear stick.
- For a few seconds, press and hold the VSC button.
- The TRAC OFF and VSC OFF indication lights will now turn on, as you can see. The VSC system and traction are both currently disabled.
- For a second, press the VSC button once more. The systems are now reengaged as the TRAC and VSC lights both disappear.
If this doesn’t solve the issue, you should examine the trouble codes and conduct proper troubleshooting. If you don’t have the skills to do it yourself, take your car to a shop.
What triggers the Toyota Highlander’s VSC light?
The Toyota Highlander is a midsize sport utility vehicle with automatic gearbox, all-wheel drive, and third-row seating with a variety of comfort features. Air bags, a tire pressure monitoring system, and a vehicle stability control system are all standard safety features. The “VSC” light may come on the dashboard as a result of specific car problems interfering with the vehicle stability control system. It could be able to reset the VSC warning light on your car’s dashboard by making a quick fix.
What could activate the VSC light?
Vehicle Stability Control, or VSC, is one of the older automotive technologies that helps keep vehicles stable in emergency situations and at high speeds. When the car detects an anomalous imbalance from any perspective, it automatically assists you in regaining control of the vehicle. It is referred to as the VSA system in Honda vehicles.
A vehicle’s traction in challenging weather conditions is improved by the vehicle stability control (VSC) system. By applying brakes to all wheels to halt the automobile from further sliding, it cooperates with the anti-lock braking system (ABS) to stop the vehicle from swaying. When there is an issue with the VSC or ABS, the VSC check light illuminates.
When operating a vehicle in challenging weather or driving conditions, the vehicle stability control system also aids with traction. It collaborates with the anti-lock braking system to stop the automobile from slipping or sliding by properly applying the brakes to all of the wheels in order to stop the car from sliding further and causing brake problems.
When the VSC light on your car’s dashboard comes on, either the VSC or the ABS are malfunctioning. Some automobiles include an independent ABS light that illuminates when the ABS is malfunctioning.
Dashboard lights on daily-driven automobiles in Nigeria frequently have VSC problems with Lexus, Toyota, and Honda, but there is no cause for alarm.
C1201:
The two P0 codes indicate that the emissions system has a leak. Technically, it might be in the charcoal canister or filler neck, but most of the time it’s just a leaky gas cap. Either a worn-out cap or one that was put incorrectly.
The car is instructed to switch on the check engine light and turn off the traction and VSC by the C1201 code. In essence, this code is responsible for alerting you to an issue when the other two appear. Since they are the ones that created it, fixing the other codes should also repair this one.
What does it cost to repair VSC?
Lexus VSC repairs would cost between $200 and $300. But that depends on what made the light come on. Vsc collaborates with the ABS and other auto parts. Therefore, it is best to find the problem before discussing how much to remedy it.
My Toyota Highlander has traction control; how do I turn it off?
To avoid wheelspin and additional downshifting, the traction control is turned on and off by the TRAC system. Press and release the button fast to turn off the TRAC system. The TRAC OFF signal should activate. To restart the system, press the switch once again.
How can I reactivate my stability traction control?
On the dashboard, there is a yellow warning light called the Service StabiliTrak Light. When the StabiliTrak Control Module malfunctions, it comes on. You must reset your StabiliTrak Control Module if the Service StabiliTrak Light illuminates. You can accomplish this by unplugging the battery or by forcing a reset. Here is a brief guide.
- At this point, the light ought to turn off. If it doesn’t, turn off the engine and give it another go after 10 seconds.
- Don’t start the car; just turn the key to the on position.
- Five times in the space of five seconds, depress the gas pedal. Use the clutch if your car has a manual transmission.
- Leave the car running for roughly 15 minutes after turning it off.
- Until the light is turned off, repeat this step.
A qualified mechanic should be consulted if you require assistance when executing a force reset on your vehicle. Amateurs shouldn’t attempt this since they risk escalating any harm already present in the problem.
What does the stability control light imply when it illuminates?
ESC-equipped vehicles typically have a dashboard indicator light. While you’re driving, if the ESC indication light comes on, it could signal a number of different things.
The ESC light may occasionally come on if your car is actively attempting to maintain traction control. Your car is not under control if the ESC light is illuminated continuously. Additionally, if the ESC light is on for a long time, either your ESC is broken or the system has been manually turned off.
A broken ESC won’t function again until the problem is rectified. There is a button in your car that you can use to reactivate your ESC if it was manually deactivated. Consult your owner’s handbook if you’re unclear of where this button is situated in your car.
Of course, you can continue to drive your automobile if your ESC light illuminates. However, keep in mind that the ESC light can be a sign that the road is slick and you should slow down to better your control. And if you have an ESC malfunction, you should take your automobile to an auto body shop right away to have it fixed.
On a Toyota Highlander, how do you reset the check engine light?
If the problem or code that caused your Toyota Highlander’s check engine light to come on is fixed, it will typically turn off by itself. For instance, if a loose gas cap was the reason your check engine light came on, the light will automatically switch off once the gas cap is tightened.