Replacement starters for Toyota Corollas typically cost between $312 and $391. Between $60 and $75 is the projected labor cost, while between $252 and $316 is the estimated cost of the parts.
In This Article...
The starting is where, exactly?
The starter is situated beneath the left mound of cylinders on the driver’s side of a car, between the transmission and the engine. It is kept in place by a few bolts and fastened to the mounting plates. Two cables are also connected to it.
Your car’s engine needs a starter to start and run smoothly. It is a relatively tiny device that is powered by the car’s battery. The car won’t start if a starter is defective.
A starter motor is a dependable component, so replacing one is not something you do frequently. Unlike other components, it might only need to be replaced once during the course of the vehicle’s lifetime.
How much does it cost to replace a starter?
I’m sorry to hear that your car is having problems. You should also account for labor charges, which might run from $150 to $1,000. A new starter may cost between $80 and $350.
The average vehicle’s replacement starter costs roughly $500. Your mechanic appears to be charging you the standard rate for this work. However, you should plan an additional $100 to $200 on top of that charge. The mechanic might find other issues, such as a crankshaft or ring gear trouble.
A starter includes the following parts, among others:
- Switch fork
- gear for the starter
- bushes and bearings
- Commutator and armature
- Solenoid
- Brushes
- either permanent magnets or electromagnetic field coils
Remember that you have to totally remove the starter from the engine area. This can result in a hefty labor charge.
The starter is more readily accessible in some cars, and removal takes less than an hour. Some cars are more complicated than others, such those where the starter is hidden beneath the intake manifold. These are substantially slower cars. The complexity of the repair, which is partly decided by your make, model, and year, will determine the final cost.
If you truly believe that your repair bill was overpriced, you can always challenge it.
How can you identify if the issue is with the ignition switch or starter?
Examine the starter. It is located underneath the hood, typically on the passenger side, right close to the transmission at the bottom of the engine. The ignition switch, which often sits on the steering column, is a group of electrical contacts that turns on the starter.
How can you identify if the problem is with your starter or battery?
Let’s start by diagnosing this problem since it is the least expensive and easiest to replace. Does the car make a clicking noise when you try to start it, but it won’t turn over? That might be encouraging. A dead battery is likely the culprit if a jump starts the car but it won’t start once it is turned off.
Why did my car battery die?
Consider checking to see if you may have left the vehicle’s interior or exterior lights on or if a door may not have closed all the way. We’re confident you already did this as soon as the problem began. Open the hood and inspect the battery terminals if the problem wasn’t caused by the lights. You may only need to give the terminals a brief clean with a toothbrush and some baking soda solution if you notice corrosion (a white powder-like substance) there. Still not an issue? Think about the battery’s age. The average automobile battery lasts 4-5 years. Have your problem diagnosed as soon as possible if your battery is less than four years old and has no other problems. If the problem is with the battery, you might be covered by a warranty and be able to get a replacement. If the diagnosis reveals that your battery is in good condition, the problem may be with the alternator.
The next step is to inspect the alternator if there doesn’t appear to be anything wrong with your battery yet it won’t maintain a charge.
How can you tell whether your alternator or starter is malfunctioning?
Is it the battery, starter, or alternator? Match the symptoms on your car to the most likely cause.
- The Symptom: Lights that flicker and dim. The Alternator Is Probably at Fault.
- Dash lights come on as the symptom, but the car won’t start. The Most Likely Offender: Starter.
- Jump Start Doesn’t Work is the Symptom.
Something sounds off.
When you turn the key or press the start button, there may be a clicking sound, which is one of the signs of a defective starter. However, a starting can stop working altogether or make noises that signal its approaching demise, such as buzzing and grinding. Oh, listen!
You’ve got lights but no action.
You may have a problem with the starter if you try to start the engine and the dashboard illuminates but nothing happens to the engine.
Your engine won’t crank.
Even after attempting a jumpstart, does your engine still not start? At this point, you should dial a towing service and drive your vehicle to the closest Firestone Complete Auto Care. Nothing else than a qualified technician will start your engine if a jumpstart doesn’t work.
Smoke is coming from your car.
The starter is a component of your car’s electrical system and is vulnerable to short circuits and blown fuses. Your car’s starter may overheat if you’ve been trying to start it for a long time, which increases the likelihood of electrical problems and the accompanying smoke. Call for assistance if you see or smell smoke instead of twisting the key more.
Oil has soaked the starter.
If your vehicle has rear-wheel drive, the starter is often located on the passenger side of the engine, directly below the exhaust manifold. If it is a front-wheel-drive vehicle, look above the transmission on the driver’s side or under the exhaust manifold. On some automobiles, they may also be found just beneath the intake manifold. If you open the hood to discover that your starter is covered in engine oil, your broken starter may be a sign of an oil leak, which is another issue. Keep an eye out for oil leaks to prevent starter problems of this sort because, regrettably, what begins as a few droplets of oil can steadily and often unnoticeably evolve into a costly problem.
Can you change your own starter?
The majority of people believe that if their automobile won’t start, the battery is to blame. They attempt to boost it, but it still won’t turn on. Obviously, it’s a beginner or something little more severe. The alternator receives a charge from the battery of the car through the starter. The alternator’s charge makes it possible for the car to start. The car is dead if the starter is worn out since it won’t accept or send a charge. A repaired starter is just as effective as a new one and is less expensive than buying a new one, which is pretty pricey [source: Allen]. Save money by replacing the starter yourself if it is the true source of the issue. How to change an automobile starter is as follows:
- In order to disconnect the negative battery cable from the battery, turn off the ignition.
- From the starter, unplug the positive cablethe substantial cable that connects to the battery.
- Using a ratchet, unplug each of the bolts holding the starter to the block.
- Any additional mounting brackets keeping the starter in place should be removed.
- The starter’s bolts must all be removed. Bolts that are difficult to remove or extremely tight should not be forced. Instead, use oil or lubricant to aid in removing the bolt.
- Take the starter out of the vehicle.
- The new starter should be mounted on the block and fastened with bolts. Reconnect the battery cable to the starter before tightening the bolts.
How long does a starting repair take?
What is the turnaround time for starter motor replacement? Its replacement should take between two and four hours. Some starter motors are difficult to access, which might lengthen the process and increase the cost of your final bill.