The normal price range for a starter replacement is $440 to $551.
Between $112 and $141 can be spent on labor, while between $307 and $410 can be spent on parts.
Of course, taxes and fees are not included in this. The costs may also differ based on the make, model, and necessity of any associated repairs on your car.
In This Article...
For a Toyota Camry, how do you replace the starter?
Instructions
- Battery wires should be disconnected and set aside.
- Pressing in on the side of the starting connector will disconnect it.
- From either side of the starter, remove the 14mm bolt.
- Rotate the starter to reveal the bottom after removing it from the housing.
- Ratcheting tool is used to remove rubber boot from over 12mm bolt.
What signs indicate a bad starter?
Still, keep an eye out for these seven indications that your starter is failing.
- #1: The Engine Won’t Start.
- #2: Loud, grinding, or whirring noise.
- #3: Occasional Trouble Starting the Car.
- #4: The Starter Continues After the Start.
- #5: Smoke.
- #6: The starter engages but the engine won’t turn over.
- 7. Battery
How much does it cost to replace a starter?
I’m sorry to hear that your car is having problems. You should also account for labor charges, which might run from $150 to $1,000. A new starter may cost between $80 and $350.
The average vehicle’s replacement starter costs roughly $500. Your mechanic appears to be charging you the standard rate for this work. However, you should plan an additional $100 to $200 on top of that charge. The mechanic might find other issues, such as a crankshaft or ring gear trouble.
A starter includes the following parts, among others:
- Solenoid
- either permanent magnets or electromagnetic field coils
- Switch fork
- Commutator and armature
- gear for the starter
- Brushes
- bushes and bearings
Remember that you have to totally remove the starter from the engine area. This can result in a hefty labor charge.
The starter is more readily accessible in some cars, and removal takes less than an hour. Some cars are more complicated than others, such those where the starter is hidden beneath the intake manifold. These are substantially slower cars. The complexity of the repair, which is partly decided by your make, model, and year, will determine the final cost.
If you truly believe that your repair bill was overpriced, you can always challenge it.
The starting is where, exactly?
The starter is situated beneath the left mound of cylinders on the driver’s side of a car, between the transmission and the engine. It is kept in place by a few bolts and fastened to the mounting plates. Two cables are also connected to it.
Your car’s engine needs a starter to start and run smoothly. It is a relatively tiny device that is powered by the car’s battery. The car won’t start if a starter is defective.
A starter motor is a dependable component, so replacing one is not something you do frequently. Unlike other components, it might only need to be replaced once during the course of the vehicle’s lifetime.
Why won’t my Toyota Camry start?
There are a few causes of Toyota Camry non-starters. The top five causes, according to VEHQ, include a dead battery, a faulty alternator, a damaged ignition switch, a clogged fuel filter, or a low gasoline level. Of course, a quick glance at the fuel gauge will eliminate the final problem.
I don’t want to remove my starter, but how can I test it?
The engine must be spun or cranked by the starter. If it does, the wires, connectors, or relay are the cause of the issue. If not, start the engine and use the black/negative jumper cable to establish a connection between the drivetrain and the battery’s negative terminal as a ground. Connect the red cable to the positive terminal of the starter.
Something sounds off.
When you turn the key or press the start button, there may be a clicking sound, which is one of the signs of a defective starter. However, a starting can stop working altogether or make noises that signal its approaching demise, such as buzzing and grinding. Oh, listen!
You’ve got lights but no action.
You may have a problem with the starter if you try to start the engine and the dashboard illuminates but nothing happens to the engine.
Your engine won’t crank.
Even after attempting a jumpstart, does your engine still not start? At this point, you should dial a towing service and drive your vehicle to the closest Firestone Complete Auto Care. Nothing else than a qualified technician will start your engine if a jumpstart doesn’t work.
Smoke is coming from your car.
The starter is a component of your car’s electrical system and is vulnerable to short circuits and blown fuses. Your car’s starter may overheat if you’ve been trying to start it for a long time, which increases the likelihood of electrical problems and the accompanying smoke. Call for assistance if you see or smell smoke instead of twisting the key more.
Oil has soaked the starter.
If your vehicle has rear-wheel drive, the starter is often located on the passenger side of the engine, directly below the exhaust manifold. If it is a front-wheel-drive vehicle, look above the transmission on the driver’s side or under the exhaust manifold. On some automobiles, they may also be found just beneath the intake manifold. If you open the hood to discover that your starter is covered in engine oil, your broken starter may be a sign of an oil leak, which is another issue. Keep an eye out for oil leaks to prevent starter problems of this sort because, regrettably, what begins as a few droplets of oil can steadily and often unnoticeably evolve into a costly problem.
How much does an Autozone starter cost?
Starting at $50 up to $350, rebuilding parts for a starter can be expensive. A new starter might cost anything between $80 and $350. You should budget between $150 to more than $1,100 for a trained mechanic to replace or rebuild your starter.
How can you identify if the issue is with the ignition switch or starter?
Examine the starter. It is located underneath the hood, typically on the passenger side, right close to the transmission at the bottom of the engine. The ignition switch, which often sits on the steering column, is a group of electrical contacts that turns on the starter.
How can you identify if the problem is with your starter or battery?
Let’s start by diagnosing this problem since it is the least expensive and easiest to replace. Does the car make a clicking noise when you try to start it, but it won’t turn over? That might be encouraging. A dead battery is likely the culprit if a jump starts the car but it won’t start once it is turned off.
Why did my car battery die?
Consider checking to see if you may have left the vehicle’s interior or exterior lights on or if a door may not have closed all the way. We’re confident you already did this as soon as the problem began. Open the hood and inspect the battery terminals if the problem wasn’t caused by the lights. You may only need to give the terminals a brief clean with a toothbrush and some baking soda solution if you notice corrosion (a white powder-like substance) there. Still not an issue? Think about the battery’s age. The average automobile battery lasts 4-5 years. Have your problem diagnosed as soon as possible if your battery is less than four years old and has no other problems. If the problem is with the battery, you might be covered by a warranty and be able to get a replacement. If the diagnosis reveals that your battery is in good condition, the problem may be with the alternator.
The next step is to inspect the alternator if there doesn’t appear to be anything wrong with your battery yet it won’t maintain a charge.
Why won’t my car start even though the battery is not dead?
Damaged or Broken Ignition If your headlights work but your car won’t start, your battery is charged but the starter or ignition isn’t working properly. A starting engine can be jumped using a charged battery if the starter or ignition is the issue.
Can you jump start a car with a dead starter?
Although a car with a defective starter can be jump started, the underlying problem will not be resolved. Your car’s battery is what gets boosted by a jump start, not the starter.
While a jump start can help the starter acquire the extra power it needs to start your engine because the starter is powered by the battery through a relay, it is not certain that a jump start will be helpful if the problem is with the starter.
For a proper diagnosis and solution to the problem, you are best off visiting a mechanic. Jumping your car every morning is not a workable approach, regardless of the circumstance!
A reliable strategy to make sure you’re taking good care of your set of wheels is to take it to the mechanic, along with giving it a robust vehicle insurance coverage.
In less than a minute, Jerry will produce comparable quotes from leading providers if you’re looking for auto insurance.
How long does a mechanic need to change a starter?
Depending on where the starter is located in your engine, replacing one will take anywhere from two to four hours.
Some engines have starters that are easier to access than others. To get that starter, a mechanic might need to scrounge around and remove certain components. If so, a 4 hour time limit would likely be more appropriate than a 2 hour one.
Download the Jerry app to see if you’re overpaying for auto insurance as you wait for the technician to finish. We warrant that replacing your starter will be much quicker!
Simply spend a minute to respond to a few questions, and Jerry will do the rest of the work for you. To find you the greatest bargain, they’ll create competitive quotations from top insurance companies. When a customer shops with Jerry, they often save over $800!
Why does a beginning fail?
The most frequent causes of starter failure are natural wear and tear or operator (or installation) mistake. The magnetic “brushes” that ride around the armature inside the starter might become worn down over time. The starter solenoid, which is located slightly outside the main casing and permits electricity to pass through the starter, is susceptible to mechanical sticking and arching as well as being exposed to damagingly high temperatures. It is not long for this world if you ever see or smell smoke coming from the starter, therefore you should get in touch with a technician right away.
The starter fuse is where?
By vehicle type and model, the start relay’s location varies. The right fender, the instrument panel under the fuse panel, or the fuse box (also known as the power box) are all potential locations. It will typically be in a sizable box with a black top under the hood of your car. Relays and fuses for automobiles are fitted here. It can also be known as a fuse box. Usually, the driver’s side of the car has this box fitted.
The relay receives and discharges wires. However, a lot of other relays in autos look similar. It could be challenging to locate or even remove the fuse box under the dashboard that contains the starting relay. Finding the starting relay that is fastened to the fender wall might not be difficult. The mounting posts and leads on these relays, which are typically cylindrical, can be used to identify them. Please consult your service handbook if you are unsure which relay serves as the beginning relay.