Paint code information: usually consists of three numbers, but it may also be a letter and number combination.
Location: Under the trunk deck is typically where you can find the color code. On occasion, though, it can be seen on the bonnet’s underside.
In This Article...
Audi
Paint code information: The codes may consist of 2–3, 4–4, or number/letter combinations.
Location: Audi paint codes are typically found under the trunk deck lid or in the spare tire well.
Bentley
Paint code information: The length of the code varies, and it consists of both numbers and letters. Under the “Paint No. indicator,” it is very clearly stated on the tag.
Location: The code can be found in a variety of places, including the doorjamb, the door edge or hinge, the trunk, and the front of the hood.
BMW
BMW paint codes typically consist of three numerals, a forward slash, and another number. The paint code tag also displays the color’s name, which is written in both English and German.
The paint code plaque can be found on the firewall, right wheel well, or left wheel well. The owner’s manual for your car has a list of the precise location of the paint code.
Chevrolet
Information about the paint code: Chevrolet paint codes typically have 3–4 letters and digits and begin with the BC/CC prefix. If your vehicle has two-tone paint, two codes will be listed before a U (upper) and L. (lower).
Location: The paint color code tag can be found on the driver’s side door jamb, beneath the driver’s seat, or in the passenger sun visor. It is typically found inside the glove box or in the wheel well.
Ferrari
Details about Ferrari paint codes: The names of various paint types are listed in Italian after a string of numbers in a Ferrari paint code. Ferrari has lately altered the names of its colors, so be sure to thoroughly review the color code.
The specified paint code may be found mounted under the deck lid on the majority of Ferrari vehicles.
How can I determine my car’s color code?
Finding the precise shade of automobile paint to hide the unsightly damage on your car might be a difficult task. You want to be sure the spray paint you choose is an exact match because there are thousands of variations of a single color available.
You will require:
- The Color Scheme
- Your car’s license plate number (VIN)
You must locate your VIN plate in order to find these digits at home. The paint code, however, is typically located on a plaque or sticker inside the driver’s door or in the glove box. For a list of the most frequent spots to check, see our diagram below!
You can make an exact match of the paint you need once you have this information.
If you need assistance or advice on body repair, you can read this advice article or stop by the store to chat with a member of our staff. Our straightforward four-step procedure is Prep, Prime, Paint, and Protect.
Where on the VIN is the color code?
Here are the areas to look, starting with the most likely sites. Find a sticker in any of the following places:
- jammed driver’s side door
- Simply check at the door jam portion toward the bottom of the door itself on the driver’s side.
- In the windshield, close to the VIN number
- Look at the bottom right of the driver’s side of your car from the outside. Your VIN number and, in some situations, your color code can be found here.
- A glove box.
- rear door jam on the driver’s side
- sun visor on the passenger side
- trunk lid or floor
- Spare tire well with spare tire cover
However, the paint code may be found in other places on some cars, particularly international models.
If everything else fails, simply give your local dealer a call and provide them with your VIN; they will inform you.
Paint information is not available in online VIN lookup tools.
If you can’t locate it on your car, you’ll need to phone the automakers to inquire as they keep this information private.
Simply use the “Other / Not Listed paint code option if you are ordering a painted product from us and are unable to locate your color code. After that, we will get in touch with you to find out your color code. As an alternative, you might try asking for help from your neighborhood dealership.
Wait! Check out our replacement parts if you need to fix a body part like a fender, bumper cover, or hood.
We provide far better prices than the majority of dealerships and body shops and ship the same business day. We likely have what you’re looking to repair because we have a sizable inventory of over 50,000 replacement parts that ship the same business day.
Does the VIN number contain the paint code?
The VIN on your automobile can tell you a lot about it, but it can’t tell you what color it is. Where can one find car paint color, then?
Most cars include a list of color codes in the driver’s door jamb. There is usually a tag there that contains details about the car, including the color of the paint. These placards list two paint codes: an interior paint code and an external paint code, which are occasionally referred to as “trim” and “paint,” respectively.
The paint codes can occasionally be more challenging to locate. Check your owner’s manual if you can’t find any information on the paint code in the door jamb. The location of the color code signs is typically indicated, eliminating the need for guesswork.
Without a code, how can I match the paint on my car?
It can be difficult to determine the precise color code of your car if you have the misfortune of scratching it and need to quickly cover up the paint. Usually, you can locate it on the inside of the driver’s door, but occasionally, it may not be there at all, leaving you to ponder how to fix your paint issue. Some companies may offer to mix colours to try to achieve the ideal shade, but even this won’t exactly match the color your car was when it was brand new.
Drivers frequently either leave the scratch or struggle to find a remedy as a result. This blog will detail how to match car paint without a code in detail.
Scratches
Many drivers believe that it is vital to have the scratches covered up if your automobile receives damage from someone else or from normal wear and tear. especially when it comes time to sell the car if you are the owner.
To Colour Primer Parts
Your automobile’s manufacturer or supplier will need to know what car paint code they need to match the new parts’ primer color to your car when you order new components for it.
Matching car paint without code
Here are a few techniques for locating vehicle paint without a code: Check the vehicle’s service record.
Checking the vehicle’s service history is the first possible approach to locate a code; it should be listed there.
Research your vehicle’s exact model on Google
If the vehicle’s service history and owner’s manual aren’t able to help you locate the code, you can possibly be successful by typing the precise make and model of your car into a search engine. There will be a backlog of vehicle manufacturer paint colors and codes on several websites, making them more accessible than ever.
Spectrophotometer machines
A spectrophotometer is a piece of equipment used to analyze color measurement that you have probably never heard of. It offers spectrum analysis and delivers information with such accuracy that the exact color cannot be distinguished by the human eye. These devices, which are often available at specialized suppliers and paint shops, are ideal if you can’t find a valid automotive paint code anyplace at all.
Color palette
Our color scheme, which consists of Toyota Red, white, black, and gray, is straightforward and striking. These are the hues that represent our identity as well as the entirety of our visual identity system. Additionally to the
These are the sole colors that will be used in our brand messages because they are inherent to photography. This limited color scheme will improve brand recognition and visual impact.
How is a VIN number read?
The first three digits of the VIN are known as the WMI and identify the manufacturer, the country of origin, and the particular division within the manufacturer.
Keep the following in mind:
- J-RAsia
- Australia and New Zealand are 6-7
- North America, 1–5
- S-ZEurope
- South America 8–9
- A-HAfrica
What does a VIN number’s eighth digit signify?
The Vehicle Description Section is represented by the numbers in positions 4 through 9. (VDS). Your vehicle’s model, body type, restraint system, gearbox type, and engine code are all identified by the fourth through eighth digits.
How can I tell what color a paint is?
Best for: Painting tasks and wall touch-ups that demand a color match that is as accurate as feasible.
Advantage: By reading from a real paint sample rather than a swatch, the spectrophotometer can produce an accurate color match.
Gather a sample to bring to the paint store if all else fails and you need a perfect match for a wall that has already been painted. Although an analyst will come pretty close using a spectrophotometer, a device that breaks down color into its various wavelengths and then analyzes them to determine the precise combination of paint pigments needed to recreate the desired color, paint color is different from sheen, and an overly glossy sample can affect how the color is determined. will nevertheless get close. Thankfully, flat, matte, or eggshell sheens, which provide a closer match than glossier paints, are the most common sheens for wall paint.
Using paint chips from the wall you want to match, follow these steps to match wall paint:
- On a small, inconspicuous area of painted drywall, score and remove a square with a sharp utility knife. You need a chip that is at least one inch square for the best results.
- The experts at the paint retailer will examine the chip using a spectrophotometer to determine which color from their brand is the most similar. Be warned, though, that while you should be able to come near enough to mislead the untrained eye, you might not be able to make an identical match because the majority of the well-known paint firms try to avoid duplicating a trademarked color.
- Remember to repair the area where you took the sample before using the fresh paint. Before painting the wall, fill up any depressions or gouges with spackle, smooth it with a scraper or dull blade, and allow it to completely dry.