Although they can last up to 100,000 miles, it’s always a good idea to change them before that. The valves, pistons, and other internal engine components can sustain significant damage in the event of a belt failure.
In This Article...
Timing belts for Toyota cars last how long?
Timing belts are important, but unless your Toyota owner’s handbook specifically advises it, they don’t need to be replaced on a regular basis. Between 60,000 and 100,000 miles, some automakers advise changing the timing belt, while others don’t. Many timing belts available now can last 100,000 miles or more before they need to be replaced.
What drives the timing on a Toyota Highlander—a belt or a chain?
The Toyota Highlander has a variety of engines with either a timing belt or a timing chain from the model years 2001 to 2021. Both interference and non-interference engines are also present.
What’s more common, a timing chain or timing belt in a 2013 Toyota Highlander?
All 2021 Toyota Highlander models include an interference engine and timing chain. Check out the information in the table below.
How much does a 2007 Highlander timing belt replacement cost?
Belts don’t cost a much by themselves. Since many pieces must be removed in order to reach the belt, labor is where the true expense lies. Your best chance is to shop about and compare prices, but be prepared to pay anything between $409 and $919. (including parts and labor).
A timing belt’s lifespan is 200 000 miles.
That concludes our examination of the timing belt’s nature, operation, and significance. Can a timing belt travel more than 200 000 miles? Not at all. And to be honest, unless you have a junker that you don’t mind giving up, you really shouldn’t try this out in person. Expect severe engine damage if you continue to drive your automobile with a timing belt that is worn out, installed incorrectly, or otherwise flawed.
The cost of replacing your timing belt is by no means a cheap one. You’ll have to pay several hundred dollars, or in some cases nearly or more than a thousand. But this is little compared to the $2,000, $3,000, or even higher needed to rebuild a broken timing belt-related engine that has failed. Who would have thought that this tiny piece of rubber could fail and give you such heartache?
How can you tell when a timing belt needs to be replaced?
5 Typical Symptoms That Your Timing Belt Must Be Replaced
- Ticking noise from the engine. The motor may make a ticking noise as the timing belt begins to deteriorate.
- The engine won’t start.
- Engine sputtering
- Engine Idling in a Rushed Manner.
- Oil leakage and a decline in oil pressure
How long does a Toyota Highlander timing belt last?
Although they can last up to 100,000 miles, it’s always a good idea to change them before that. The valves, pistons, and other internal engine components can sustain significant damage in the event of a belt failure.
How long is Highlander going to run?
How many miles can a Toyota Highlander travel on average? When you inquire with a Toyota dealer, they will give you the high-end estimate, which is approximately 300,000 miles.
This figure is approximately 50–100,000 miles higher than you would generally anticipate in this price range and size class.
Although 300,000 miles is certainly not unheard of, if you take care of your Highlander, you shouldn’t be surprised to see it go far beyond that number.
However, this is the best-case situation and presupposes that you are most likely the first owner and haven’t been putting off any oil or fluid changes.
A typical used Highlander will likely travel at least 250,000 miles with its original engine and transmission if you’re the third or fourth owner. From then, everything will depend on you.
According to Kelley Blue Book, the typical American logs 14,000 miles a year on their vehicles. Therefore, if you can keep it clear of rust and prevent collisions, your Highlander might live over 20 years, assuming ordinary mileage.
The majority of Highlanders are built on the same Toyota K platform as the Avalon, which has been known to travel more than 500,000 kilometers.
All things considered, driving a Highlander into Guinness World Record zone is possible if you really know how to maintain an SUV.
A timing belt is present on a 2016 Toyota Highlander, right?
For robustness and long life, more recent models use timing belts consisting of polyurethane and Kevlar. Although they can last up to 100,000 miles, it’s always a good idea to change them before that. The valves, pistons, and other internal engine components can sustain significant damage in the event of a belt failure.
Should a timing chain be changed?
When should a timing chain be changed? Unless there is a specific issue, the timing chain typically needs to be replaced between 80,000 and 120,000 miles. In automobiles with higher mileage, chain problems are frequent.
What models of Toyota have timing chains?
- Toyota Camry: The timing belt is used in all models from 1990 to 2001 as well as the V6 model from 2004 to 2006. The timing chain is utilized by the 2002–2020 4-cylinder and 2007–2020 V6 vehicles.
- Timing belt for all Paseo models from 1992 to 1997.
- Prius: From 2001 to the most recent models, all Prius models share the same timing chain. The Prius C, Prius V, Prius Prime, and Prius Plug-in are all included in this.
- This subcompact’s timing chain-powered 4-cylinder engine was sold from 2000 to 2005.
- All Avalon models from 1995 to 2004 feature timing belts. Timing chains are used in the vehicles from 2005 through 2020, including the 4-cylinder Avalon Hybrid.
- All Tercel models produced between 1990 and 1998 had engines with timing chains.
- Timing chain for all models, 2003–2013, shown as a matrix.
- Timing chains are used in all Yaris vehicles produced from 2007 through 2020, including the Scion iA and Hatchback variants.
- Toyota’s well-known Corolla compact vehicle has a timing belt from 1990 to 1997. Timing chains, however, were introduced in models starting in 1998. The Corolla Hybrid and Corolla iM/Scion iM models are included in this.
- Cressida: The straight-six engine of the Toyota Cressida from 1990 to 1992 had timing belts.
Am I able to replace the timing belt myself?
It does need some engine knowledge to replace a timing belt and water pump, so if you don’t have much expertise working under the hood, we advise leaving it to the experts. However, if you prefer making your own repairs and restorations, you can do it yourself and avoid paying hefty repair expenses in the process.
Starting with the tools you’ll need, we’ll walk you through the replacement of a timing belt and water pump step by step.
What You’ll Need to Replace the Water Pump and Timing Belt
- tools for driving screws, such as Philips and slot drive
- Wrench socket set
- Set of Allen keys
- a fresh timing belt
- Tip-Ex, white chalk, and white paint (for marking the cogs for simpler reassembly)
- leather gloves
- new antifreeze/coolant
- jar or bucket (for collecting coolant)
- a fresh water pump
- bags made of plastic and a permanent marker (for labelling nuts, bolts and parts you remove from the engine)
Step 1: Preparation
Get your car and work area ready first. Depending on your degree of experience, changing a timing belt and water pump can take anywhere from one to three hours, so make sure you have the time and space necessary. Before you begin, carry out the following:
- Before starting, make sure the engine is entirely cool.
- Since coolant will spill out when you remove the water pump, place a bucket underneath it. To find the pump, see your car’s manual.
- To reach the undercarriage beneath the engine, jack up the front of the automobile.
- To stop the engine from spinning while you’re removing the timing belt, put the engine in drive and use the handbrake.
- Prepare all of your tools, and have bags and a pen on available to name and store the engine parts you remove.
Step 2: Removing the Belts
You must first remove the fan belt and power steering belt because they are located next to the cover that protects the timing belt and water pump. To remove the belts, take the following actions:
- The fasteners holding the alternator in place should be loosened. The fan belt can then be removed by lightly tapping it.
- Crankshaft pulley: Loosen. To access the engine and remove the bolt, you’ll need a long wrench arm.
- To access the timing case and crankshaft pulley, do the same with the power steering belt by moving it aside.
How long does a timing belt last?
According to various schedules, including data provided by the manufacturers, a timing belt typically has to be replaced after 7 to 10 years, or between 60,000 and 105,000 miles, whichever comes first.
Why is a timing belt replacement so pricey?
The timing belt is not a pricey component by itself. It is so expensive because of the time and labor involved. The engine must be disassembled in order to access the timing belt. It takes a lot of time and effort to do it.
Will my engine be destroyed if my timing belt breaks?
First of all, how could you possibly predict when your timing belt will fail? Your car cannot function at all without a timing belt, which is really fairly basic. The automobile will quickly break down if the belt breaks while you’re driving, and your engine could sustain extremely catastrophic damage. In order to take action before it is too late, you need to be on the lookout for warning signs and symptoms of a weakening timing belt. These include your engine making loud clicking or screaming noises, misfiring, and not starting at all.
What is the price of changing a timing belt?
The engine of your car cannot function without a timing belt. Timing belt preventative maintenance is far less expensive than waiting for it to break. O’Leary’s Automotive provides skilled mechanics who can assist if you need high-quality timing belt repair in Wilmington, North Carolina.
The camshaft and the crankshaft are two different types of shafts found in your engine. These shafts are made to start the engine cycle and deliver torque while controlling the pistons in the engines. The camshaft and crankshaft are controlled by grooves or teeth on the timing belt. This makes it possible for the engine valves to open and close precisely when necessary for efficient operation.
Timing belts comprised of chains and gears are used in some automobiles. Although these timing belts are more resilient, they need lubrication to function. The timing belts in many modern automobiles are comprised of a rubber composition. These timing belts tend to wear out more quickly but are quieter and more energy-efficient.
Warning Signs a Timing Belt Replacement is Needed
The majority of timing belts require replacement every 60,000 to 90,000 miles. Because it is crucial to the engine’s functionality, the timing belt acts inside the engine. Don’t put off changing the belt until it breaks. Your engine won’t start if your timing belt breaks.
You might observe one or more of the following if your timing belt is broken or worn out:
- the engine’s smoke
- lower oil pressure
- Rumbling or rough idling coming from the engine
- engine stalls
- damaged pistons or valves