Therefore, the timing belt or chain is in charge of synchronizing the crankshaft and camshaft of the engine. This enables smooth engine operation and prevents engine damage by enabling the pistons and valves to move at the proper timing. The engine cannot function properly and may possibly sustain significant internal engine damage if the timing belt or chain fails.
Over the years, Toyota has used both timing belts and chains in their vehicles. However, since 2005, Toyota has primarily used timing chains in their automobiles. Even though they can be noisier and require adequate maintenance, timing chains can survive for a very long time, so owners won’t need to replace them regularly. Timing belts, on the other hand, don’t need as much upkeep, but drivers must replace them more frequently after around 65,000 miles. Before 2005, Toyota mostly used the timing belt in its vehicles.
We hope the list above has made it easier for you to determine whether your Toyota has a timing chain or belt.
In This Article...
Timing belts: Still in use with Toyota?
Timing chains are more enduring and last a lot longer even if they are heavier than belts. The 2020 Toyota Corolla, 2020 Toyota RAV4, and even the 2020 Toyota Yaris all have timing chains rather than timing belts as standard equipment. Timing belts, however, might still be present in some older Toyota vehicles.
Are there a timing belt or chain on a 2012 Corolla?
CarsGuide has responded. The engine of your Corolla has a timing chain rather than a timing belt, which is good news, Amy. The timing chain should last the lifetime of the engine, however the timing belt needs to be replaced on a regular basis.
What models of Toyota have timing chains?
- All Avalon models from 1995 to 2004 feature timing belts. Timing chains are used in the vehicles from 2005 through 2020, including the 4-cylinder Avalon Hybrid.
- Cressida: The straight-six engine of the Toyota Cressida from 1990 to 1992 had timing belts.
- Prius: From 2001 to the most recent models, all Prius models share the same timing chain. The Prius C, Prius V, Prius Prime, and Prius Plug-in are all included in this.
- This subcompact’s timing chain-powered 4-cylinder engine was sold from 2000 to 2005.
- Toyota Camry: The timing belt is used in all models from 1990 to 2001 as well as the V6 model from 2004 to 2006. The timing chain is utilized by the 2002–2020 4-cylinder and 2007–2020 V6 vehicles.
- Timing chain for all models, 2003–2013, shown as a matrix.
- Timing chains are used in all Yaris vehicles produced from 2007 through 2020, including the Scion iA and Hatchback variants.
- Toyota’s well-known Corolla compact vehicle has a timing belt from 1990 to 1997. Timing chains, however, were introduced in models starting in 1998. The Corolla Hybrid and Corolla iM/Scion iM models are included in this.
- All Tercel models produced between 1990 and 1998 had engines with timing chains.
- Timing belt for all Paseo models from 1992 to 1997.
Should Toyota timing chains be changed?
Timing chains do not require routine replacement, but timing belts do. The timing chain shouldn’t need to be changed unless it has been harmed, overworked, or otherwise compromised. Your car will most likely experience one or more faults if there is a timing chain issue.
A broken timing chain will show the symptoms listed below:
- The engine shakes or rattles while it is idling.
- The vehicle won’t start
- Misfiring engines and sluggishness
- Starting the car is challenging.
- The check engine light is on.
- The timing chain has noise.
You might hear noise coming from the area where the timing chain cover resides. This noise is frequently the result of a loose timing chain, which may be brought on by a broken timing chain tensioner, guide, or other issues. More serious issues will arise if you ignore the early warning signs, so be sure to check the timing chain as soon as you hear a noise coming from where it is mounted.
The Toyota 1.8 engine is it interference?
1.5-liter Toyota Non-Interference Engine (3E-E & 5E-FE) Non-Interference, 1.6L DOHC (4A-GE & 4A-GZE) 4AF Non-Interference; Non-Interference; 1.6L DOHC (4A-F & 4A-FE) Non-Interference, For example, 4AFE, 1.8L 7AFE, 2.5L Non-Interference
Timing belt or chain: which is superior?
Timing belts typically last less time than timing chains. Timing belts are made of rubber, which isn’t as strong as metal, but chains are made of metal, and this is the simple explanation for why this is the case. Timing belts are not weak, but they will probably need to be replaced at some point, whereas a chain can last the lifetime of the car.
Timing belts typically need to be replaced in the mileage range of 55,000 miles (about 90,000 km) and 90,000 miles (roughly 150,000 km). Therefore, a timing belt is still a very reliable and significant component of your car.
Whether your car has a timing chain or belt, it’s critical that you watch for any symptoms of wear and strain and take appropriate action. Depending on the sort of engine you have, a broken timing belt can have disastrous results. You could be better off searching to get a new vehicle if the repairs are too expensive to be practical.
Which automobiles use timing chains rather than belts?
Timing chains are being installed in more and more vehicles. The majority of Mercedes and BMW vehicles come with timing chains.
A non-exhaustive list of vehicles that can have timing chains installed is provided below:
- Duster, Sandero, and Sandero Stepway from Dacia
- 159 Alfa Romeo
- Skyactiv-G engine in Mazda
- Corvette by Chevrolet
- Every SAAB has a turbocharged engine.
- Every Cadillac
- a lot of Mercedes
- many BMWs
- Jazz Honda
You may physically inspect your car’s timing belt or chain by removing a cover at the end of the engine, consulting your owner’s manual, or asking your mechanic. The timing chain is easily identified by its metal links when the cover is removed with the proper tool, whereas the belt is comprised of rubber and is considerably more flexible.
Ask your mechanic: “How do I tell whether my automobile has a timing belt or chain? if you are still unclear.
You won’t typically need to replace your car’s timing chain. Poor lubrication is likely to have ruined a chain that has to be replaced.
If the timing chain is determined to be damaged, it’s critical that you hire a reputable expert to handle the repair. In extreme cases, the mechanic will even need to completely remove the engine to get to the timing chain. If the timing chain breaks, it may harm other engine components like the valves, making the repair more involved and pricey.
How frequently must a timing chain be changed?
When should a timing chain be changed? Unless there is a specific issue, the timing chain typically needs to be replaced between 80,000 and 120,000 miles. In automobiles with higher mileage, chain problems are frequent.
Is the 1.8-liter Toyota Corolla engine reliable?
The base motor is a 1.8L 4-cylinder DOHC with 132 horsepower (model 2ZR-FE). It is an established basic and dependable motor. It can survive well over 200K miles with proper upkeep. The Camry and RAV4 share a 2.4L 4-cylinder 2AZ-FE engine that produces 158 horsepower with the Corolla XRS.
Does the Toyota Corolla from 2009 to 2013 have a timing belt or chain? There is no timing belt; the timing chain is present in both the 1.8L and 2.4L engines. If the timing chain is functioning properly, there is no need to replace it. Check the oil level between oil changes and top it off if necessary to extend the life of the timing chain. A low oil level will cause the chain to wear out more quickly.
How durable is a 2012 Toyota Corolla?
How long do Toyota Corollas last? may be on your mind if you’re thinking about buying one. The Toyota Corolla has a life expectancy of up to 10 years or 300,000 miles with routine maintenance and service. You might own your new Corolla for well over a decade if you take good care of it.
What are some typical 2013 Toyota Corolla issues?
A few of the issues and recalls for the 2013 Toyota Corolla involve the airbag system, steering lock-up, and noisy brakes. With fewer owner complaints than competing compact sedans, the 2013 Corolla is superior. The final model year of the tenth generation, 2013, has less issues than the 2014 revision.
Owners mention issues with the radio, such as the radio turning off and on. The problem can be resolved by replacing the head unit, and some dealerships will pay for the replacement as part of the warranty.
Owners also complain about premature brake wear. The only option, which costs roughly $300, is to replace the worn-out brake pads or rotors with new ones.
Another issue owners report is with their engines, particularly with quick acceleration. Since there are many potential causes of acceleration problems, seeing a mechanic might help identify the issue’s root.
Compared to comparable vehicles from the same era, there are just five recalls. One occupant sensing system recall and four airbag recalls are included. Since airbag recalls safeguard passengers, they must be addressed.
How much does it cost to repair a timing chain?
How much does it cost to replace a timing chain? Timing chains can be changed by a professional for $1,600 to $1,800 or you can do it yourself for $600 to $800. The cost is significant because it’s challenging to replace this component.
Has the 2008 Toyota Corolla has a timing chain or belt?
The 2ZR-FE engine that is currently installed in your Corolla features a timing chain. Timing belts are used in older Corollas with the 7A-FE engine. There is no particular period when this needs to be adjusted, as we explained to our other reader. Although a timing chain may still deteriorate and stretch with use, chances are strong that it will never need to be replaced. A timing chain failure is still possible, however it is unlikely, and would only happen if maintenance was skipped if the engine had a very high mileage.
Has a 2004 Toyota Corolla got a timing chain or belt?
As your engine cycles through each phase, the timing belt aids in the coordinated opening and closing of various valves.
Your Toyota Corolla does not have a timing belt if it was manufactured in 1998 or later (it uses a chain instead). Timing belts are used in Corollas produced between 1990 and 1997.
Timing belts on Toyota Corollas should normally be changed every 60,000 miles.
How can timing chain failure be avoided?
- Check your timing chain cover for leaks frequently.
- Make that the engine oil is not running low.
- Avoid letting the engine get too hot; if it does, don’t drive.
Can I drive on a bad timing chain?
The timing chain expands over time, as was already mentioned. Even though you can still drive with an old timing chain, we advise replacing it as soon as you observe stretch or other signs of failure.
A faulty chain can jump many teeth or entirely break if you drive on it for an extended period of time and it continues to strain, which can seriously harm your engine’s internal components.
How can you tell when your timing chain is failing?
The engine stalls out. An engine misfire might result from a stretched timing chain that has lost its integrity, skipping a gear and losing the required coordination. Misfires that occur frequently may be a sign of a timing chain problem and should be looked into.