Advanced Full Synthetic 0W-20 Motor Oil, 5 Quart, Valvoline (Part No. 881150)
In This Article...
Is synthetic oil required for a Toyota Corolla?
Only Solution. Only Toyota cars (apart from 3UR-FBE Engines*) that require 0w-20 synthetic oil have been given the go-ahead for longer oil change intervals of 10,000 miles or 12 months. (You should, though, keep checking the oil level frequently and topping off as necessary.
What is the purpose of 0W-20 oil?
The most popular and widely used motor oil grades have evolved over time to match the engines that automakers have utilized. In the 1960s, it was typical for a vehicle to need a monograde oil, with the viscosity or grade needed varying with the season. Multi-grade oils have taken the place of the requirement to switch grades according to the seasons or weather as motor oil chemistry has improved.
The size and power output of engines have varied substantially as vehicle engine technology has advanced. In order to protect the engine, it was typical in the 1970s to have an extremely huge engine (6-cylinder and 8-cylinder engines were the most popular). 20W-50 and 10W-40 were the most often used grades at the time. Smaller engines required lower viscosity motor oils as fuel efficiency became more important, which over time led to a growth in demand for the 10W-30, 5W-30, and 5W-20 grades.
Modern engines are developing more quickly than ever. Engines are being designed by automakers to be lighter and smaller while producing more power than ever. Thinner lubricants with improved engine protection and cleaning capabilities are required to safeguard these smaller, more powerful engines. This has caused 0W-20 to be the motor oil grade with the quickest rate of growth.
Will 5W-30 work in a Toyota Corolla?
* Recommended viscosity (SAE): SAE 0W-20, 5W-20, or 5W-30 engine oil is advised in severely cold temperatures since SAE 10W-30 or a higher viscosity engine oil may make it difficult to start the engine.
Here is an explanation of oil viscosity using 0W-20 as an example.
The characteristic of the oil that allows for cold starting is indicated by the 0W component of the oil viscosity rating. Engine starting in cold conditions is made easier by oils having a lower value before the W.
The number 20 in 0W-20 denotes the oil’s characteristic viscosity at high temperatures. If the vehicle is run at high speeds or with a heavy load, an oil with a higher viscosity (higher value) may be more appropriate.
Toyota 0w20 is fully synthetic, right?
Finding the ideal motor oil for your car is more challenging now that there are so many options available. Oil types like OW-20 are currently becoming much more widespread. Why should you use this oil? What is it?
Toyota car owners now favor the new 0W-20 Oil over other types of oils.
The cost of a quart of the pure synthetic 0W-20 oil is approximately $6.36. Although a quart costs quite a bit, it is the best oil you can use in your Toyota.
The use of synthetic oil is spreading. Simply said, it outperforms traditional motor oil in a wider range of driving circumstances and doesn’t degrade as quickly. Toyota advises using it in all of their vehicles, with the exception of select 4Runner/Tacoma and Flex Fuel Tundra/Sequoia models, because it is so well-liked (see: is Synthetic Oil Good or Bad).
Visit your local Toyota dealership soon and ask about this new, lighter oil. These days, it is the ideal option for your Toyota automobile.
Is synthetic oil 0w20 good?
A great winter viscosity grade oil is 0W-20, which offers good engine performance and a smooth oil flow. It is perfect for cold starts and below-freezing temperatures due to its thinner oil structure. It can significantly improve the performance and vital engine components of the car in the appropriate engine.
The most important thing to keep in mind is to give your automobile some TLC by getting normal maintenance and frequent oil changes.
We provide superior ASE-certified mechanics and affordable mobile automobile repair and maintenance services to meet the demands of your car.
Share this narrative:
How often should an oil change be performed on a 2018 Toyota Corolla?
Typically, synthetic oil needs to be changed every 7,500 to 10,000 miles. One of the most fundamental and fundamental services for your car is an oil change. For traditional oil, Toyota suggests changing your 2018 Toyota Corolla’s oil and filter every 3,000 to 5,000 miles.
How frequently should 0W-20 oil be replaced?
The manufacturer has approved an oil change interval of 10,000 miles or 12 months for Toyota vehicles that utilize 0w-20 synthetic oil. When using this type of oil, vehicle owners should periodically check the engine’s oil level and top it off as necessary. This will enhance the effectiveness of the synthetic oil. The 10,000-mile oil change interval has NOT been approved by Toyota if you operate a Toyota Tundra or Toyota Sequoia that is fitted with a flex fuel-compatible engine.
Some engines may safely run on 0w-20 synthetic oil despite being tuned to run on 5w-20 mineral oil. Even if synthetic oil is used, these engines will still require the 5,000-mile/six-month oil change period.
Other maintenance tasks
Owners shouldn’t disregard the other maintenance requirements of their car just because it has a longer time between oil changes. Despite the fact that the oil only needs to be changed once a year, or after 10,000 miles, the 5,000-mile services are still necessary. This would cover procedures like brake inspections and tire rotations.
Toyota continues to demand the 5,000-mile/six-month interval from owners who frequently make short journeys in below-freezing weather, drive on dirt roads, off-road, or tow big loads. Even if an owner uses synthetic oil, this is still true.
Your Owner’s Manual
Although it’s really easy, owners manuals are frequently disregarded. To find out the appropriate viscosity of the motor oil you should use, always consult your owner’s handbook. Use the 0W20 and 5W20 variations interchangeably, depending on the weather, if they are both on the list.
Location
Given that both 0W20 and 5W20 motor oils operate in much the same temperature range, it is critical to think about where you will be using the car. The operating temperature range for synthetic oil is -40C to 20C for 0W-20 and -35C to 20C for 5W20 (5W20 synthetic oil). Being aware of these facts means two things:
- If you reside in a region with extremely low temperatures, such as Alaska or Maine, it is preferable to use 0W20 oil.
- In places like Florida when the temperature is above 20C/68F, you cannot use either 0W20 or 5W20.
Viscosity
The motor oil will flow more smoothly the lower the number is. At beginning temperatures, a 0W20 will be more fluid than a 5W20, but both will function similarly at normal engine operating temperatures. Keep in mind that engine oils naturally become thinner during heating and thicken while cooling.
Quality Testing
Any oil brand with the appropriate viscosity grade and the API donut symbol is acceptable. The oil has passed the testing required for SL service, as indicated by the starburst sign.
The API donut indicates that your motor oil passed the current SL service rating test after being tested by the American Petroleum Institute. ACEA (Association des Constructeurs Europeens d’Automobiles) is the counterpart of API in Europe.
Manufacturer Requirements
If your vehicle is substantially loaded, the machine designer would typically advise using an oil that has a high viscosity and is heavy like honey. However, if it moves quickly, a lubricant that can move out of the way and then move back in is preferable.
Fuel Economy
Despite the fact that both 5W20 and 0W20 (0W20 synthetic oil) can be used at 20C/68F, 0W20 is thinner than 5W20 at cold engine temperatures, particularly in the initial minutes after starting your automobile. Because it gives the car slightly higher fuel economy than the 5W20, new models specify it. The 0W20 model satisfies a turbo-diesel engine’s requirements as well.
What happens if I substitute 5W20 for 0W20?
The ability of an oil to flow is measured by its viscosity. It also describes the thickness of the oil at various temperature levels.
When operating in freezing temperatures, 0W-20 motor oil performs like an SAE 0W weight oil. While 5W-20 oil functions as an SAE 5W weight oil.
The better the motor oil performs at low temperatures, according to SAE nomenclature, the lower the number before the ‘W’ is. Since 0W20 is much thinner than 5W-20, it is more stable at low temperatures and flows easily through the essential engine components.
A more suitable oil for a typical operating temperature range of -22F to 68F is 5W-20, which has a viscosity that is relatively thicker.
Can I replace the 5W-20 in my Toyota with the 5W-30?
It is generally not advised to substitute 5w30 oil (or any other oil weight) for 5w20 oil because even a small viscosity change has the potential to harm your engine.
Because your engine was developed with 5w20 oil in mind when it was constructed, all of the parts that come into contact with it must be a specified viscosity after the engine hits operational temperature, or 212.
5w20 oil will have a lower viscosity than 5w30 oil at this temperature; it will flow more easily and with less resistance. When 5w30 is used in place of 5w20, the engine will experience increased oil resistance once it reaches working temperature, which the engine is not built to manage.
If you substitute 5w30 oil for 5w20 when doing so is not advised or authorized by the owners handbook, it could violate your car’s powertrain warranty, impair engine performance, and ultimately harm your engine.
Using the proper oil keeps your engine operating at its best.
use Jerry to be sure you maintain it covered with the appropriate insurance policy. As the leading broker and comparison app for auto insurance in the country, Jerry makes it simple to locate and compare affordable quotes, helping users save $887 annually on their auto insurance.
What is the purpose of 5W-30 motor oil?
Generally speaking, 5W-30 motor oil is a winter viscosity grade. Although it functions satisfactorily at greater temperatures, its best application is for drivers in colder climates.
It is often advised for petrol vehicles or a light-duty diesel engine because of its lower viscosity. In addition to these uses, 5W-30 multigrade oil is also employed for the following things:
- Some individuals might switch to this oil in the winter because it offers superior engine protection and aids in removing engine deposits in lower temperatures.
- Since it is less prone to thermal breakdown, it is better for drivers who frequently experience temperature fluctuations.
- For low-duty application in light vehicles and passenger cars
- For engines not operating under excessive pressure
Let’s look at some of the most frequently asked questions regarding 5W-30 motor oil now that we understand what it is used for.
Describe SAE 5W-30.
A popular motor oil for light-duty gasoline and diesel engines is 5w30. 5w30 is a multi-grade oil, like the majority of modern motor oils, ranging from a lower viscosity grade of 5 to a higher viscosity grade of 30.
The “W” stands for “winter; the number before it denotes the thickness or viscosity of the oil at low temperatures (thus the “W”); the number following it denotes the thickness or viscosity of the oil at higher temperatures, when the engine is operating.