Let’s get right to the point: the 1.8-liter 4-cylinder engine in the 2010 Toyota Corolla has a 13.2-gallon oil capacity. And sure, regardless of the trim or model you own, the oil capacity stays the same. Your engine will still require 13.2 gallons of oil whether you drive a 2.4-liter 4-cylinder XRS sedan or a manual transmission.
Pro tip Do not equate oil capacity with your engine’s displacement or the 1.8-liter volume the cylinders occupy. Never mix up these numerals since they stand for different things.
In This Article...
What kind of oil does a 2010 Toyota Corolla need?
Okay, so now that we’ve discussed the engines oil capacity, you’ll also need to think about the type of oil required to keep everything functioning properly. Don’t just grab any old oil off the shelf; look for SAE 5W-20 grade full synthetic oil instead.
What do we actually mean by SAE 5W-20 oil then? The viscosity of the oil is shown by the numbers, which essentially just indicate how thick it is. The oil has a low viscosity at 0F if the number 5 is placed before W, which stands for winter, and maintains a relatively thin consistency even at 212F.
It’s important to follow the manufacturer’s advice, so look for Toyota original motor oil or an alternative that complies with the International Lubricant Specification Advisory Committee’s (ILSAC) 5W-20 recommendations.
Your engine will run at its peak efficiency and be protected from harsh aging if you use the right oil. This is so because synthetic oil is created specifically with more stable synthetic chemical components, which makes it more resistant to deterioration.
To acquaint yourself with possibilities, you can explore online for oil before visiting the store, but your neighborhood car parts and service shop should be able to give you the complete lowdown on what’s best. Use the Toyota-approved alternative, Mobil 1 Advanced Fuel Economy 0W-20 Full Synthetic Motor Oil, if in doubt.
Is synthetic oil used in 2010 Corollas?
You should exercise caution because putting the incorrect type of oil in your car might seriously harm the motor. Synthetic motor oil of the grade 5W-20 is required for the 2010 Toyota Corolla to operate effectively.
Ask the staff member at your nearby auto parts store for advice on the best oil for your automobile if you have any extra queries regarding motor oil brands and grades. Most staff members will be pleased to assist you in finding the proper oil for your vehicle so you may keep on driving safely.
Check out the Jerry app to discover more about your alternatives for auto insurance while you’re learning about your car’s oil type. For additional information, download the app and respond to a few short questions.
Recommended Oil Change Intervals for Toyota Vehicles
You were supposed to replace your oil every three months or 3,000 miles, whichever came first, according to an old proverb. This is no longer the case, though, as engine technology has developed and become more effective. Toyota advises consumers to have their vehicle’s oil changed professionally or by themselves every six months or five thousand kilometers, whichever comes first.
Recommended Oil Viscosity for Toyota Models
Toyota owners who enjoy DIY projects might be interested in changing their own car’s oil. We endorse this course of action because it offers customers a lot more cost-effective option than even bringing their car to one of the more reasonably priced service facilities nearby. Make sure you are using the right oil if you plan to change your Toyota’s oil on your own. Naturally, as Toyota Genuine Motor Oils are created exclusively for use with Toyota engines, we advise using these. But another choice that is suitable as well is synthetic oil with a viscosity of 5W-30!
Is a Toyota oil filter required?
You need an oil filter specifically created for your Toyota in order to get the best performance. When Toyota creates an oil filter, they take into account:
- Oil capacity for the engine
- what kind of oil is used in the engine
- RPM range where the engine is typically operated
- The preferred time between oil changes
Toyota places a great priority on designing a high-quality filter that will correctly filter the oil and won’t clog up between oil changes since they will guarantee your engine.
replacement oil filters? Not really. For their oil filters, aftermarket manufacturers frequently employ a universal design. They don’t offer an engine warranty, and they don’t really care how well your car’s filter functions.
Are OEM oil filters preferable to aftermarket filters?
When compared to aftermarket oil filters, OEM oil filters are a significantly better investment. OEM oil filters and o-rings are made with better components and last a lot longer. Given that VW offers a 72,000-mile engine warranty, this shouldn’t come as a surprise. Because they have to pay to fix them, VW wants to make sure that none of its engines have problems. VW gains from having a reputation for producing long-lasting engines even after the warranty expires. Therefore, they urge you to utilize a premium filter. There is no such stake in the game for makers of aftermarket oil filters. Their sole objective is to make money off of filters. How long your engine lasts is largely irrelevant to them.
Toyota oil filters: Are they all the same?
Keep in mind that not all oil filters conform to Toyota’s exacting requirements. A non-Toyota filter element can not function as well and even clog, costing your engine money. Always specify a Genuine Toyota oil filter to save your engine (and your wallet).
Toyota oil filters last for how long?
Your Toyota Camry’s oil filter will naturally last for more than 3,000 miles or three months, but frequently changed oil filters can endure typical wear and tear for up to 7,500 miles.
Can I substitute 0W-20 oil for 5w20 oil?
The 20 in 0W motor oils (also known as 0W-20) stands for the viscosity measurement value, making them appropriate for usage in 5W applications. The most important factor to match when choosing a motor oil is that value. The pumpability at cold temperatures is shown by the 0W or 5W. Consequently, a 0W would flow more freely than a 5W and might be a suitable replacement. As a result, SAE 0W-20 can be used in place of SAE 5W-20 application.
**Provides improved fuel economy and faster flow while yet offering the same level of protection as 5W.
0W-20 oilis it too thin?
an inquiry from a reader “For my new pickup truck, the recommended engine oil is 0W-20. This is a significant adjustment for me because I have never owned a car that required anything other than 5W-30. 0W-20 oil appears excessively thin, and I have serious doubts. I requested that my dealer allow me to use at least 5W-20, but they claim that 0W-20 must be used in order to keep my warranty in effect. For my new engine, is 0W-20 safe?
Answer: Without a doubt, 0W-20 is safe for your engine. Since the beginning of the previous decade, manufacturers have required 5W-20 and 0W-20, and there is absolutely no proof that engine wear rates have gone up. Engine wear has never been lower because of the enormous advancements made in the last 15 years in engine designs, materials, and motor oil chemistry. The 5W-20 and 0W-20 grades are quickly replacing the 5W-30 grade in new cars. A brand-new car with the specification 5W-30 will be uncommon by the end of this decade. In fact, in the upcoming years, anticipate to see even lower viscosities, such 0W-16.
Why do auto manufacturers advise using thinner motor oils? merely to maximize fuel efficiency. However, this pattern has persisted long enough for us to draw the conclusion that there are no negative effects in terms of shortened engine life.
Regarding the second half of your query, which asks whether it is advantageous to use 5W-20 instead of the advised 0W-20, we see no justification for doing so. Let’s utilize the characteristics of the 0W-20 and 5W-20 AMSOIL Signature Series oils to demonstrate our point.
The measured in is the industry standard for assessing viscosity at operational temperature “at 100C, centistokes.
- 8.7 centistokes for AMSOIL Signature Series 5W-20.
- 8.8 centistokes for the AMSOIL Signature Series 0W-20.
The 0W-20 and 5W-20 are consequently nearly equal in terms of thickness or viscosity at working temperatures. Because it would provide a very minor increase in terms of cold weather start-up protection, the car maker chose a 0W-20 oil.
We choose a 0W-20 for year-round use even though our daily driver requires a 5W-20 in order to have the optimum start-up protection. Even in sweltering weather, we observe absolutely no oil usage in between oil changes.
In conclusion, you may be sure that a high-quality 0W-20 motor oil will provide the best wear control. Enjoy your new truck, and you may use 0W-20 motor oil with confidence.
What Are the Benefits of Synthetic Oil?
It mostly depends on the model you purchase, how the engine was made, and what is advised in the owner’s manual whether your new Toyota utilizes synthetic or traditional oil. There are advantages and disadvantages to using each type of oil, but here are a few of the advantages of synthetic oil. Before using synthetic oil, make sure to verify with the Toyota service center in your area.
- Synthetic Oil Maintains Cleaner Engines
- Enhanced Protection at Higher Temperatures
- Enhanced Protection for Performance and Turbocharged Parts
- Better Performance at Low Temperatures
- increased protection against engine wear
How Often Should You Change Synthetic Oil?
To guarantee best performance, standard oil change intervals are commonly set as 5,000 miles or 6 months. That period is increased to 10,000 miles or 12 months on Toyota cars that are required to use 0W-20 synthetic oil. Within that time frame, you should still periodically check and top off the oil level. For other models, synthetic oil is an option, and regardless of the type of oil you choose to use in those models, it is advised that you stick to the 5,000-mile/6-month intervals.
How can a Toyota oil filter be removed without a wrench?
The Toyota oil filter can be removed at a low cost by using sandpaper. You may easily create a tight grip over the oil filter by wrapping the sandpaper over it. After ensuring that your sandpaper is well wrapped, simply pull it in the other direction. The force generated produced by doing so will enable you to remove the Toyota oil filter without the use of a wrench.
Will 5W 30 work in a Toyota Corolla?
* Recommended viscosity (SAE): SAE 0W-20, 5W-20, or 5W-30 engine oil is advised in severely cold temperatures since SAE 10W-30 or a higher viscosity engine oil may make it difficult to start the engine.
Here is an explanation of oil viscosity using 0W-20 as an example.
The characteristic of the oil that allows for cold starting is indicated by the 0W component of the oil viscosity rating. Engine starting in cold conditions is made easier by oils having a lower value before the W.
The number 20 in 0W-20 denotes the oil’s characteristic viscosity at high temperatures. If the vehicle is run at high speeds or with a heavy load, an oil with a higher viscosity (higher value) may be more appropriate.