What Type Of Oil Does A Toyota Tacoma Use?

The SAE 0w-20 synthetic oil that the Tacoma uses. The 3.5L (211 ci) V6 engine holds 6.1 quarts, whereas the 2.7L (164 ci) 4 cylinder engine stores 6.2 quarts (6.2 with a tow package).

What type of oil does Toyota suggest for the Tacoma?

Which is better for your Toyota Tacoma when it comes to oil changes or additions? The best oils on the market were identified because we want to ensure that you give your Tacoma the greatest care possible. Below are our conclusions.

Toyota Tacoma requires 5W-20 and 0W-20 oil, both of which are readily available on the market. Selecting an API-certified engine oil might help if you want to make sure the oil you use is good for your Toyota. Despite the fact that there are many great non-certified oils available, API certification might provide you piece of mind while lubricating your motor. The top seven oils for your Toyota Tacoma are shown below:

  • Castrol Edge Advanced Full Synthetic SAE 0W-20 Extended Performance
  • Extended Performance Full Synthetic 5W-20 from Mobil 1
  • Advanced Full Synthetic 0W-20 Valvoline
  • Platinum Full Synthetic 0W-20 Pennzoil
  • Full Synthetic Shell Rotella 5W-20
  • New Generation Liqui Molygen 0W-20
  • SAE 0W-20 Royal Purple

You still have a lot to learn about properly maintaining your Toyota Tacoma. Continue reading to learn how to check your Tacoma’s oil, how many quarts are required, where to locate the filter, and other topics.

We hope the links provided are helpful to you before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!

What type of oil can be used in a V6 Toyota Tacoma?

Oil filter, hardware, and 6 liters of 5W-30 Toyota Tacoma engine oil for 4.0L V6 applications. Enhanced engine protection with Ravenol CleanSynto oil technology.

What is engine oil 0W 20?

In colder temperatures, 0W-20 motor oil flows as freely as 0 Weight oil, but once the engine reaches operating temperature, it behaves more like 20 Weight oil. This guarantees that oil will begin to flow through the engine right away, lubricating important engine components even in cold weather.

The ‘W’ in viscosity descriptions does not, contrary to popular belief, stand for weight. In actuality, it represents Winter. This means that synthetic 0W-20 oil performs as a 0 Weight oil in cold areas but becomes as thick and viscous as a 20 Weight oil once the typical engine temperature has been attained.

Castrol EDGE, a cutting-edge full synthetic 0W-20 motor oil, is part of the company’s line of low viscosity 0W-20 lubricants. It is our toughest oil and is made to endure high temperatures and pressure. For those who want to push their car to the limit, it’s the perfect choice. Full synthetic 0W-20 motor oil liquid Castrol GTX MAGNATEC is designed with protective, clever ingredients that offer outstanding wear prevention.

What kind of oil is suggested for Toyota?

In addition to preventing corrosion and lumping, the ideal mixture of Toyota Synthetic and Mobil 1 Synthetic Motor Oil functions smoothly in both low and high temperatures. Every six months or 10,000 miles, Toyota advises having factory-trained technicians perform an oil change (whichever comes first).

Can I substitute 5W20 for 0W20?

One of the low-temperature grades added to the SAE J300 EOVC system after 1952 is 0W20 motor oil (0W20 oil). It is a liquid designed to behave as an SAE 20 once the engine reaches its operating temperature but flow as easily as an SAE 0 in subzero conditions.

Even at -35C/-31F, this type of oil will still start to flow through the engine’s oil channels. This oil lubricates important engine components, making it simpler for you to start your engine cold in the winter.

W20 vs 5W20 Fuel Economy

Another low-temperature grade often advised for winter use is 5W20 motor oil, with 10W-30 serving as an option for higher temperatures. Because it offers the best fuel economy, reduces fuel consumption, and produces fewer exhaust pollutants, this oil type is widely used. Motor companies and governments all around the world, led by those in Japan, Europe, and the US, are looking for 5W20.

Low viscosity, high-quality synthetic grades 0W20 and 5W20 can both significantly improve fuel economy. When employed in fair-weather temperatures, their attributes are identical. When utilized in cold temperatures, there is little to no difference between the two variants.

The amount of oil that a Tacoma 3.5 consumes

This vehicle is propelled by a 3.5-liter V6 engine with a 6.2-quart or 5.9-liter oil capacity.

The 3.5-liter volume is actually the displacement of your engine, which is not the same as oil capacity. The cylinder volume swept by all of the pistons in a piston engine is measured as displacement.

What kind of oil does a 2019 Toyota Tacoma 3.5 need?

The name of the oil refers to how thick or viscous it is. The numbers before the W, which stands for winter, indicate the thickness of the oil at 0°F, and the numbers after the dash indicate the thickness of the oil at 212°F. The group that assigns codes to oil viscosities is known as SAE, or Society of Automotive Engineers.

Full synthetic oil contains less contaminants, better characteristics, and is created with additives that function better than regular oil.

Any full-synthetic oil with the right viscosity, such as Mobil 1 – Extended Performance 0W-20 Full Synthetic Motor Oil, would work just fine. However, Toyota explicitly advises using Toyota Genuine SAE 0W-20 Full-Synthetic Motor Oil.

A synthetic mix is an option if you’d want to save some money (synthetic motor oil may be rather pricey), but bear in mind that you might need to change your engine oil more frequently. Castrol GTX 0W-20 High Mileage Synthetic Blend Motor Oil is what we advise.

In my 2009 Toyota Tacoma, can I use synthetic oil?

The 2009 Toyota Tacoma 4.0L recommends using AMSOIL OE Synthetic Motor Oil since it is specifically designed for the longer oil change intervals. Longer than the conventional 3,000-mile oil change interval, it includes innovative synthetic technology that resists chemical breakdown for ultimate wear protection for your car.

RWD Base, 4.8 quarts with filter Check the oil level after refueling. If necessary, top off the proper level. In accordance with the most recent service information as of 5/15/2018, this specification has been revised.

RWD PRE, 5.5 quarts with filter Check the oil level after refueling. If necessary, top off the proper level. In accordance with the most recent service information as of 5/15/2018, this specification has been revised.

RWD XRUN, 4.8 quarts with filter Check the oil level after refueling. If necessary, top off the proper level. In accordance with the most recent service information as of 5/15/2018, this specification has been revised.

How frequently should a 2017 Toyota Tacoma have its oil changed?

For traditional oil, Toyota suggests changing your 2017 Toyota Tacoma’s oil and filter every 3,000 to 5,000 miles. One of the most important and expensive maintenance for your car is an oil change. Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles.

Is 0W20 harmful to engines?

an inquiry from a reader “For my new pickup truck, the recommended engine oil is 0W-20. This is a significant adjustment for me because I have never owned a car that required anything other than 5W-30. 0W-20 oil appears excessively thin, and I have serious doubts. I requested that my dealer allow me to use at least 5W-20, but they claim that 0W-20 must be used in order to keep my warranty in effect. For my new engine, is 0W-20 safe?

Answer: Without a doubt, 0W-20 is safe for your engine. Since the beginning of the previous decade, manufacturers have required 5W-20 and 0W-20, and there is absolutely no proof that engine wear rates have gone up. Engine wear has never been lower because of the enormous advancements made in the last 15 years in engine designs, materials, and motor oil chemistry. The 5W-20 and 0W-20 grades are quickly replacing the 5W-30 grade in new cars. A brand-new car with the specification 5W-30 will be uncommon by the end of this decade. In fact, in the upcoming years, anticipate to see even lower viscosities, such 0W-16.

Why do auto manufacturers advise using thinner motor oils? merely to maximize fuel efficiency. However, this pattern has persisted long enough for us to draw the conclusion that there are no negative effects in terms of shortened engine life.

Regarding the second half of your query, which asks whether it is advantageous to use 5W-20 instead of the advised 0W-20, we see no justification for doing so. Let’s utilize the characteristics of the 0W-20 and 5W-20 AMSOIL Signature Series oils to demonstrate our point.

The measured in is the industry standard for assessing viscosity at operational temperature “at 100C, centistokes.

  • 8.8 centistokes for the AMSOIL Signature Series 0W-20.
  • 8.7 centistokes for AMSOIL Signature Series 5W-20.

The 0W-20 and 5W-20 are consequently nearly equal in terms of thickness or viscosity at working temperatures. Because it would provide a very minor increase in terms of cold weather start-up protection, the car maker chose a 0W-20 oil.

We choose a 0W-20 for year-round use even though our daily driver requires a 5W-20 in order to have the optimum start-up protection. Even in sweltering weather, we observe absolutely no oil usage in between oil changes.

In conclusion, you may be sure that a high-quality 0W-20 motor oil will provide the best wear control. Enjoy your new truck, and you may use 0W-20 motor oil with confidence.

How frequently should 0W-20 oil be replaced?

The manufacturer has approved an oil change interval of 10,000 miles or 12 months for Toyota vehicles that utilize 0w-20 synthetic oil. When using this type of oil, vehicle owners should periodically check the engine’s oil level and top it off as necessary. This will enhance the effectiveness of the synthetic oil. The 10,000-mile oil change interval has NOT been approved by Toyota if you operate a Toyota Tundra or Toyota Sequoia that is fitted with a flex fuel-compatible engine.

Some engines may safely run on 0w-20 synthetic oil despite being tuned to run on 5w-20 mineral oil. Even if synthetic oil is used, these engines will still require the 5,000-mile/six-month oil change period.

Other maintenance tasks

Owners shouldn’t disregard the other maintenance requirements of their car just because it has a longer time between oil changes. Despite the fact that the oil only needs to be changed once a year, or after 10,000 miles, the 5,000-mile services are still necessary. This would cover procedures like brake inspections and tire rotations.

Toyota continues to demand the 5,000-mile/six-month interval from owners who frequently make short journeys in below-freezing weather, drive on dirt roads, off-road, or tow big loads. Even if an owner uses synthetic oil, this is still true.