The Toyota Camry series has been a leader in pretty much every category, from interior tech sophistication to power and performance under the hood. With this sedan legend, you may reach whatever driving objectives you have, but it will only function at its peak when the proper oil is used. Since each engine is unique, it might be challenging to determine which sort is best for your engine. If, however, you prefer to change your own oil, we have the solution right here. Visit us today to view the recommended oil type for each engine in the 2018 Toyota Camry!
In This Article...
Toyota Camry 2.5-liter Inline 4 oil type
In order to properly maintain your engine, you should aim to use SAE 0W-16 viscosity oil, according to the official 2018 Toyota Camry owner’s manual. This is because of how this oil is created, which gives you the best performance possible when starting your engine in cold weather, operating at high speeds, and doing anything else. However, you’re safe utilizing higher level fluids like SAE 0W-20 oil indoors if SAE 0W-16 is not readily available.
Toyota Camry 3.5-liter V6 oil type
On higher trims of the 2018 Camry, there is also a 3.5-liter V6 engine that produces greater power and has a different arrangement, necessitating the use of a stronger oil. Owner’s instructions advise using SAE 0W-20 for this, while SAE 5W-20 can be used in a pinch if necessary.
What sort of oil will fit in a Toyota Camry?
The Toyota Camry 2020 requires 0W-20 synthetic motor oil. Toyota sells an additive at Toyota dealerships that is applied to their OEM oil. However, any ILSAC-certified 0W-20 synthetic oil will function. If 0W-20 synthetic oil is not available, 5W-30 mineral oil will function in its place. At the subsequent oil change, it must be replaced with 0W-20 synthetic oil.
How often should I change the oil in my Camry?
The owner’s manual for your Camry contains a list of the precise service intervals. However, the interval for the most majority of synthetic oil situations is every 10,000 miles or 12 months*. The interval for older Camry vehicles that utilize 5W-30 mineral oil is 5,000 miles/6 months. Even in vehicles with a 10,000-mile/12-month oil change interval, other maintenance like tire rotation and fluid adjustments still needs to be done every 5,000 miles/6 months.
*According to Toyota standards, this period is reduced to 5,000 miles/6 months if you frequently make short excursions (i.e., only in cities) in below-freezing conditions or with heavy idling.
How much oil should I put in my 2018 Toyota Camry?
You are prepared to change the engine oil in a 2018 Toyota Camry whether you have detected an indication of contaminated oil or it has simply been the right period of time. To get started, gather these supplies:
You should now warm up your engine. Depending on the weather, go for a short drive or let your car idle for 5 to 20 minutes to get the engine up to operating temperature. Then, while your car is parked on a level surface, turn off your engine and take the following actions:
Remove the oil drain bolt after bringing the drain pan and socket wrench from below the engine.
To check that the oil is at the proper level, remove the oil dipstick. Next, start the engine to check for any leaks. You’ve successfully changed the oil in a 2018 Toyota Camry if not. To properly dispose of the used oil, pour it into a sealed container and transport it to your neighborhood recycling facility. Don’t just throw the oil in the garbage or the ground.
2018 Camry synthetic oil swappable?
For traditional oil, Toyota advises changing your 2018 Toyota Camry’s oil and filter every 3,000–5,000 miles. Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles.
0W-16 oil: is it synthetic?
Before 2018, no automobiles being marketed in the US needed SAE 0W-16 oils. We are introducing Pennzoil Platinum SAE 0W-16 Full-Synthetic Motor Oil with Pure Plus Technology in light of the introduction of the 2018 Toyota Camry 2.5L Four-Cylinder model and the 2018 Honda Fit, as well as our expectation that auto manufacturers will utilize the fuel economy benefits of SAE 0W-16 motor oils in future vehicles.
Can I substitute 5W20 for 0W20?
One of the low-temperature grades added to the SAE J300 EOVC system after 1952 is 0W20 motor oil (0W20 oil). It is a liquid designed to behave as an SAE 20 once the engine reaches its operating temperature but flow as easily as an SAE 0 in subzero conditions.
Even at -35C/-31F, this type of oil will still start to flow through the engine’s oil channels. This oil lubricates important engine components, making it simpler for you to start your engine cold in the winter.
W20 vs 5W20 Fuel Economy
Another low-temperature grade often advised for winter use is 5W20 motor oil, with 10W-30 serving as an option for higher temperatures. Because it offers the best fuel economy, reduces fuel consumption, and produces fewer exhaust pollutants, this oil type is widely used. Motor companies and governments all around the world, led by those in Japan, Europe, and the US, are looking for 5W20.
Low viscosity, high-quality synthetic grades 0W20 and 5W20 can both significantly improve fuel economy. When employed in fair-weather temperatures, their attributes are identical. When utilized in cold temperatures, there is little to no difference between the two variants.
What is the purpose of 0W-20 oil?
The most popular and widely used motor oil grades have evolved over time to match the engines that automakers have utilized. In the 1960s, it was typical for a vehicle to need a monograde oil, with the viscosity or grade needed varying with the season. Multi-grade oils have taken the place of the requirement to switch grades according to the seasons or weather as motor oil chemistry has improved.
The size and power output of engines have varied substantially as vehicle engine technology has advanced. In order to protect the engine, it was typical in the 1970s to have an extremely huge engine (6-cylinder and 8-cylinder engines were the most popular). 20W-50 and 10W-40 were the most often used grades at the time. Smaller engines required lower viscosity motor oils as fuel efficiency became more important, which over time led to a growth in demand for the 10W-30, 5W-30, and 5W-20 grades.
Modern engines are developing more quickly than ever. Engines are being designed by automakers to be lighter and smaller while producing more power than ever. Thinner lubricants with improved engine protection and cleaning capabilities are required to safeguard these smaller, more powerful engines. This has caused 0W-20 to be the motor oil grade with the quickest rate of growth.
Can I substitute 0W16 for 0W20?
How four points on the viscosity rating can affect the engine’s performance and longevity is the main concern among shops. It is challenging to locate this information, let alone assess it.
The owner’s manual is the only document that cannot be disputed. Honda suggests using an API-certified 0W16 or 0W20 oil in the 2018 Honda Fit. The A25A-FKS 2.5L four-cylinder engine in the 2018 Toyota Camry is compatible with 0W16 oil that complies with API SN Resource Conserving specifications. However, they write, “If 0W16 is not available, 0W20 oil may be used,” in the paragraph after that. However, the following oil change requires that it be swapped out with 0W16.
The optimal option for fuel efficiency and cold-weather starting, according to owner’s manuals and service literature, is 0W16.
Is the 0W16 or 0W20 debate easily resolved? Yes, use 0W16 oil if you want to keep your consumers satisfied. Can 0W20 be used? When 0W16 is not available, it can be utilized in a pinch, according to both OEMs.
How frequently should I replace my oil? 2018 Toyota Camry?
Every six months or 5,000 miles, whichever comes first, you should change the oil in your Camry. The synthetic oil in your vehicle needs to be changed once a year or every 10,000 miles. Consistency is ultimately the key to ensuring that the engine of your car can function effectively.
What kind of car uses 0W 16 oil?
As automakers work to maximize fuel economy, 0W-16 oils address new engine technologies. Starting with the 2018 model year, Honda, Lexus, and Toyota advise using 0W-16 oils in a number of gasoline and hybrid engines.
We give Mobil 1TM 0W-16 Advanced Fuel Economy motor oil, a cutting-edge full synthetic formulation with an ultra-low viscosity that was created to help increase engine economy and deliver exceptional wear protection.
What do the 0W-16 digits represent? The figures represent the oil’s weight and thickness, or viscosity. When it’s cold, motor oil thickens; when it’s hot, it thins. The first value represents the oil’s viscosity when it is cold, while the second number represents the viscosity when it is operating temperature.
Choose the product that best suits your needs by comparing the many degrees of protection that each one of these offers.
Toyota 0w20 is fully synthetic, right?
Finding the ideal motor oil for your car is more challenging now that there are so many options available. Oil types like OW-20 are currently becoming much more widespread. Why should you use this oil? What is it?
Toyota car owners now favor the new 0W-20 Oil over other types of oils.
The cost of a quart of the pure synthetic 0W-20 oil is approximately $6.36. Although a quart costs quite a bit, it is the best oil you can use in your Toyota.
The use of synthetic oil is spreading. Simply said, it outperforms traditional motor oil in a wider range of driving circumstances and doesn’t degrade as quickly. Toyota advises using it in all of their vehicles, with the exception of select 4Runner/Tacoma and Flex Fuel Tundra/Sequoia models, because it is so well-liked (see: is Synthetic Oil Good or Bad).
Visit your local Toyota dealership soon and ask about this new, lighter oil. These days, it is the ideal option for your Toyota automobile.
What Are the Benefits of Synthetic Oil?
It mostly depends on the model you purchase, how the engine was made, and what is advised in the owner’s manual whether your new Toyota utilizes synthetic or traditional oil. There are advantages and disadvantages to using each type of oil, but here are a few of the advantages of synthetic oil. Before using synthetic oil, make sure to verify with the Toyota service center in your area.
- increased protection against engine wear
- Enhanced Protection at Higher Temperatures
- Better Performance at Low Temperatures
- Enhanced Protection for Performance and Turbocharged Parts
- Synthetic Oil Maintains Cleaner Engines
How Often Should You Change Synthetic Oil?
To guarantee best performance, standard oil change intervals are commonly set as 5,000 miles or 6 months. That period is increased to 10,000 miles or 12 months on Toyota cars that are required to use 0W-20 synthetic oil. Within that time frame, you should still periodically check and top off the oil level. For other models, synthetic oil is an option, and regardless of the type of oil you choose to use in those models, it is advised that you stick to the 5,000-mile/6-month intervals.
Which oil does Toyota use right out of the factory?
FAQs on Toyota Oil Change The use of certified and approved oil in your car is advised by the manufacturer. For brand-new vehicles, Toyota suggests using Toyota Genuine SAE 0W-20 Full-Synthetic motor oil.