1989 saw a redesign of the small Toyota pickups, adding rear antilock brakes and shift-on-the-fly part-time 4-wheel drive. The new ABS system was an option for the SR5 4-cylinder pickups but was standard for the SR5 V6 versions. In 1990, a 2.4-liter 4-cylinder engine with fuel injection and carburetion was standard, and a 3.0-liter V6 with 150 horsepower was also offered. The two 4-cylinder engines produced, respectively, 102 and 116 horsepower. The 3.0 liter V6 was standard on SR5 V6 models and available on Xtracab Deluxe trucks. While the other two came standard with a 5-speed manual transmission and an optional 4-speed overdrive automatic, the carbureted engine offered a 4-speed manual gearbox.
In 1990, a 2.4-liter 4-cylinder engine with fuel injection and carburetion was standard, and a 3.0-liter V6 was optional. The 4-cylinder carbureted engine has 102 horsepower. The carbureted variant produces 140 pound-feet of torque at 2800 rpm and 116 horsepower at 4800 rpm. In 1991, the carbureted engine is replaced with a fuel-injected 4-cylinder engine as standard equipment for the base model. The 3.0-liter V6 is standard on SR5 V6 vehicles and optional on Xtracab Deluxe trucks. It has 180 pound-feet of torque at 3400 rpm and 150 horsepower at 4800 rpm. The carbureted engine comes with a 4-speed manual transmission, while the other two have 5-speed manuals as standard, with a 4-speed overdrive automatic transmission as an option.
In This Article...
In what did the w58 arrive?
This transmission is frequently used to upgrade other vehicles’ shoddy standard transmissions. It was available in two variations: the original, which was found in early 1980s Celicas, Cressidas, and non-turbo Supras from 1982 to 1989; and the latter, which was found in Mk3 and Mk4 Supras, as well as Lexus SC 300s.
Which transmission manufacturer does Toyota use?
Aisin-Warner produces the A line of automatic FWD/RWD/4WD/AWD transmissions for Toyota Motor Corporation. They have a lot in common with the AW7* and 03-71* transmissions from Volvo and Aisin-Warner, which are used in Suzuki, Mitsubishi, and other Asian cars.
Three sections comprise the codes:
- The application is represented by the final digit.
- The generation is represented by the first digit. The order is 1, 2,…, 9, A, B, with A and B being considered digits.
- Two digits are used in older broadcasts.
- The generation is represented by the first digit (not the number of gears, see A10 vs A20 and A30 vs A40 vs A40D).
- three or two digits.
- Aisin-Warner Automatic corresponds to the letter A.
- Three digits are used in newer transmissions.
Does your transmission’s VIN number reveal anything?
Positions 48 of the VIN are encoded with a variety of useful vehicle information, including the engine, body type, drive type (RWD vs. AWD, etc.), restraint system, and GVWR, as was covered in Part II of our VIN Decoding 101 Guide. This VIN part is also used by some OEMs to record transmission data. Unfortunately, the NHTSA VIN standard does not call for this. VIN alone will not be sufficient to identify the vehicle’s transmission type because some OEMs continue to utilize the same 10-digit VIN sequences for automatic and manual transmission vehicles.
The gearbox match rates for total loss claims, salvage/scrap, auctions, and used car sales are significantly impacted by this, which is especially problematic for older vehicle inventory.
The owner’s manual
The owner’s manual for your car is an excellent place to start. The owner’s manual frequently mentions the type of transmission you have or mentions both a manual and standard transmission option.
Placard on the driver’s side door
Open the door on the driver’s side and check for a white sign with tiny black text. This card includes particular information regarding the car’s production year, transmission, engine characteristics, and other information.
How do I determine which transmission model I have?
Checking your owner’s manual is the quickest and easiest approach to determine your transmission type. The name and type of your transmission, as well as service information, should be listed in your handbook. Most vehicles have a white sticker printed inside the driver’s door if you’ve lost your owner’s manual.
Do Toyota pickup trucks weigh one ton?
The Ford F-150, Ram 1500, Chevrolet Silverado 1500, and GMC Sierra 1500 are the top-selling half-ton pickups, commonly referred to as light-duty pickups. As half-ton pickup trucks, the Nissan Titan and Toyota Tundra are also acceptable. These are the most typical pickup trucks, with millions being sold each year.
The Ram 2500, Chevrolet Silverado 2500, GMC Sierra 2500, and the Ford Super Duty F-250 all fall under the three-quarter ton category. These are sometimes referred to as pickup trucks from the 2500 series. Toyota does not sell a heavy-duty pickup truck, but the Nissan Titan stands out because it offers a model called the Titan XD that is more capable than a light-duty half-ton vehicle but not as powerful as a heavy-duty three-quarter-ton pickup truck. These trucks typically feature an automated transmission and a diesel engine, though they can also be equipped with large gasoline engines.
One-ton pickup trucks like the Ford Super Duty F-350, Ram 3500, Chevrolet Silverado 3500, and GMC Sierra 3500 are at the top of the range. One-ton trucks are not offered by Toyota or Nissan. These are the largest pickups that are frequently offered by consumer dealers. Any larger, and you start to look at pickup trucks offered through specialized dealerships and intended for commercial buyers.
The perplexing issue is that these trucks’ true payloads are greatly underestimated by their classifications. The half-ton class, for instance, can carry around three-quarters of a ton of payload. One-ton trucks have been known to safely haul more than double that, while three-quarter-ton trucks may carry more than a ton and a half. The only way to determine how much weight a particular truck can carry is to refer to its stated payload rating and/or gross vehicle weight rating.
Heavier frames and stronger springs, brakes, engines, or a combination of these allow for higher classes and payloads. Additionally, this beefier build greatly aids in pulling a trailer thanks to tow ratings that considerably surpass those of less capable light-duty trucks. The drawback is that as their capabilities expand, they perform more like trucks and have worse fuel economy. Given that they are physically bigger than half-ton trucks, they are harder to drive (and park).
Was there ever a V8 in the Tacoma?
The most modern Toyota Tacoma model has a V6 engine with a maximum output of 278 horsepower. This Toyota Tacoma model’s V8 engine could increase the top horsepower by more than three times.
It is truly amazing how the Tacoma’s V8 NASCAR engine manages to improve its horsepower to 900. The Tacoma revs to an astounding 10,000 rpm to reach 900 horsepower.
Tacoma’s attempt was far from being successful. Although the accelerator was floored, it was not being pushed to the very edge. As a result, the V8-powered Tacoma may even be able to push more than 900 horsepower, which is unheard of for a mid-size or mid-range truck.
Any truck’s ability to pull off 900 horsepower is impressive, let alone one that is generally only capable of providing a third of that. Imagine Tacoma’s potential if Toyota used this design and refurbishment as an example for their upcoming trucks.
What does the name Hilux mean?
“Highlux” combines the words “high” and “luxury.” Large waves are referred to as “surf,” which represents the utility of the vehicle’s range. May 2,1984. SPORTS PICKUP BY HILUX. The words “high” and “luxury” are combined to form the word “Hilux,” while “pickup” has the same meaning as in English.
R154 transmission was used for what?
R154. Up until 2004, the MKIII Supra Turbo, Toyota Crown, Toyota Chaser Tourer V, Toyota Mark II Tourer V, Toyota Cresta Tourer V, and Toyota Soarer (turbo) all came standard with this 5-speed transmission.
The W56 transmission came in what?
42 and 44 Toyota vehicles and SUVs were equipped with the reliable 5-speed manual Toyota W56 powertrain between 1985 and 1995. It shares the majority of the internals with the Toyota W55 despite having a separate model name. With the exception of the first two gears, which are lowered to better accommodate use in trucks. So let’s go further to learn how to fix Toyota W56 transmission issues.
Do you require a new transmission? Obtain a price quote for local installation and replacement transmissions. By making and model of your car, look up the transmission model.
A CD009 transmission is what?
The VQ35DE RWD transmission underwent one final revision before being replaced by the CD009 transmission, which debuted in the 20052006 350Z, 20052006 G35 Sedan, and 20052007 G35 Coupe. This variant, which is usually regarded as the best iteration of this transmission, included stronger synchros in addition to other minor design adjustments.