Depending on the model year, the Toyota Camry has varied wiper blade size requirements.
A 26″ driver’s side blade and a 20″ passenger’s side blade, for instance, are required for the 2022 Toyota Camry, while a 26″ driver’s side blade and an 18″ passenger’s side blade are required for the 2017 Toyota Camry.
The Toyota Camry’s wiper blades are a crucial safety element and should be routinely inspected, cleaned, and replaced as needed.
Check your blades once a week or anytime you find that they are not preserving the visibility of your windshield.
It’s crucial to utilize the proper Toyota Camry sizes when it comes time to change the wiper blades.
For thorough information about your specific Toyota Camry model year, scroll down or quickly jump.
In This Article...
What size wiper blades fit the Toyota Camry?
Inconvenient windshield wipers can be a huge pain! Your Toyota Camry’s year will mostly determine what size windshield wipers you require. The dimensions of the Toyota Camry windshield wipers are listed below by year:
- 26 inches for the driver’s side blade and 18 inches for the passenger side blade from 2012 to 2017.
- 24 inches for the driver’s side blade and 20 inches for the passenger side blade from 2007 to 2011.
- 2002–2006: Driver side blade measures 24 inches; passenger side blade measures 19 inches.
- 26 inches for the driver’s side blade and 20 inches for the passenger side blade from 2018 to 2022
Hope this is useful! Along with maintaining your Toyota Camry, you should also make sure it is protected by the appropriate auto insurance plan. Fortunately, the Jerry app can make finding insurance a breeze!
When using Jerry for the first time, all you have to do is respond to a few brief questions before you can begin comparing auto insurance quotes from the best insurance companies in one location. From there, you can select the coverage package that offers the best value for your needs.
Starting up takes less than a minute, and the typical Jerry user saves $887 year on auto insurance!
The size of wiper blades that fit a 2020 Toyota Camry?
1 Response. You’ll need two wiper blades if your 2020 Toyota Camry was built. Typically, the driver’s side windshield wiper has longer 26-inch wiper blades and the passenger’s side has shorter 20-inch wiper blades.
How can I tell what size my wiper blades are?
It’s possible to doubt oneself and question if there’s more to measuring windshield wiper blades than meets the eye. Nope!
The wiper blade’s length along the rubber wiper edge can be measured using a tape measure. You can now calculate the length of your wiper blades by rounding to the closest inch.
For all of your windshield-clearing requirements, we have standard duty wiper blades at our shop that are both framed and frameless.
On a Toyota Camry, how do you remove the wiper arm?
Instructions
- Wiper arm 14mm nuts should be removed.
- Take the wiper arms off.
- Using a metal trim stick, remove the rubber seal fasteners.
- Dispense with the plastic rivets holding the left-side metal panel (facing vehicle)
- Taking off the right side aluminum panel (facing vehicle)
- Around the wiper motor’s periphery, remove five 10mm bolts.
- Take the assembly out of the car.
Lift your wipers up from the windshield
It should be simple to lift your wipers up and away from your windshield once they are stopped halfway on your windshield. The old wipers on your windshield should protrude and point away from you. Now providing for simple access throughout the remaining modifying procedure.
Before you remove old wiper blades
Make sure to note which side the new blade length belongs on. Measure the previous blades’ length or simply compare it to the new Trico wiper blades. Then, position the fresh blades on the appropriate side.
Remove old wiper blades
The windshield wipers can attach to a little hook connector on your 2016 Toyota Camry. The little hook’s attachments come in a variety of styles depending on the wiper maker. In order to raise and slide off the old wiper blade, look for a button or a latch.
How frequently should wiper blades be changed?
Wiper blades should be changed approximately every 12 months. Colder regions, however, can necessitate replacement sooner. Some of the warning indicators to watch out for that can mean it’s time to change your wiper blades are demonstrated in this video.
Should all windshield wipers have the same size?
Vehicle-specific wiper blades are used for windshields. On some cars, the size of both wiper blades is the same. The two wiper blades are different diameters on various automobiles. In order to clear as much of the windshield as possible, the manufacturer chooses the best-fitting wiper blade size. You will discover that one or both wiper blades will hang over the side or touch the top of the windshield trim while upright if you change your wiper blades with a larger size blade in an effort to clear more space on the windshield. Furthermore, if both windshield wipers are overly lengthy, they could bump into each other and harm the wiper motor, arms, and blades. When the wiper blade isn’t flush with the windshield, this will result in excessive wear on the wiper blades and areas that don’t get cleared.
You will discover that some parts of the windshield are not cleaned if you change your wipers with smaller-sized blades. And some of these locations can be essential for the car to run safely.
Only replace your wiper blades with those of the size recommended by the manufacturer after consulting your owner’s handbook. This will provide a good fit and guard against damage. If you cannot find your owner’s handbook, a blade size finder can be used to quickly determine the wiper blade size.