Toyota included a 215/60R16 tire with the 2010 Camry LE. To compare online tire pricing, click on each tire.
In This Article...
What type of tires is a 2010 Toyota Camry equipped with?
Depending on the model year and trim level of your Camry, the factory-installed tire sizes include 215/60R16 tires, 215/55R17 tires, 235/45R18 tires, and 235/40R19 tires.
What is the Toyota Camry’s bolt pattern for 2010?
The bolt pattern on the 2010 Toyota Camry SE is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
On a 2010 Toyota Camry, how do you reset the tire pressure light?
Resetting the Tire Pressure Light on a Toyota Turn the key to the “On position when the car is off, but don’t let it run. When the tire pressure light blinks three times, release pressure on the TPMS reset button. Start the car and let it run for 20 minutes to let the sensor reset.
What size tires will fit on a Toyota Camry?
Tire sizes available for the 2020 Toyota Camry are P205/65VR16, P235/45VR18, P215/55VR17, and P235/40VR19. Wheel (rim) sizes for the 2020 Toyota Camry include, but are not limited to, 16 X 6.5, 18 X 8, 17 X 7.5, and 19 X 8.5.
What automobiles have a 5×114-3 bolt pattern?
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.
The 5×114 bolt pattern is what?
The stud count (five) and bolt circle measurement (114.3), the notional circle determined by the studs’ centers, make up the 5×114.3 Bolt Pattern or Pitch Circle Diameter (PCD).
Vehicles from Acura, Alpine, Aston Martin, BAIC, BYD, Baojun, and Changan all have the 5×114.3 bolt pattern. The following is a complete list of car makes and models:
What does wheel offset mean?
The distance between the hub mounting surface and the wheel center line is known as the offset of a wheel. The wheel offset is expressed as a positive, negative, or zero offset and is measured in millimeters. When the hub mounting surface is facing the front or wheel side of the wheel, the offset is positive. Positive offsets are frequently found in newer, front-wheel-drive vehicles. When the hub mounting surface is located behind the centerline of the wheels, or to the braking side, the offset is negative. Typically, a negative offset wheel has a “wide lip “With no offset The centerline of the wheel and the hub mounting surface are parallel.
A wheel offset is what? For solutions to all your offset questions, watch this video.
Does Toyota alert you to a low tire?
Tire Pressure Monitoring Systems are standard on all new Toyota vehicles (TPMS). Essentially, the system’s function is to inform drivers when a tire or tires are in need of being refilled, repaired, or replaced. Any queries customers may have about the TPMS in their Toyota car can be addressed by the service team here at Toyota Palo Alto. Come see how the Tire Pressure Monitoring System in Your Toyota Vehicle operates with our team today!
What Should You Do When the Tire Pressure Monitoring System Warning Light is Active?
In order to measure the tire pressure for each of the car’s four tires, the Tire Pressure Monitoring System in your Toyota vehicle essentially uses sensors. The TPMS Warning Light and a warning message will both illuminate on your Toyota instrument panel when one or more of your tires have too little air in them. Now, drivers should check the pressure in each of their four tires, and if required, fill them. If, after doing so, the warning light and message still appear, you should contact your neighborhood mechanic or a Toyota dealership to have the problem further investigated.
How Do You Reset the Tire Pressure Monitoring System?
Sometimes the alert will also appear after you rotate your tires, change your tire size, or adjust the tire pressure. In these situations, all you have to do is reset the TPMS to account for the modifications you made to your car’s tires. Simply press and hold the while the engine is running to reset the TPMS “Most Toyota models include a reset button on the instrument panel to the right of the steering wheel. Keep the “Press the reset button three times until the TPMS Warning Light blinks slowly. To finish the reset procedure, let the engine run for a few more minutes and then shut it off again.
Visit us at Toyota Palo Alto right away if this procedure doesn’t work if you think your Toyota vehicle’s TPMS is seriously malfunctioning. Visit us as well to learn more about the service deals we have to offer!
My tires are in good condition, so why is my low tire pressure sign on?
Typically, a tire with an air pressure that is 10% to 15% low will turn on the warning light. The air pressure inside the tires also tends to drop in cold or icy conditions. Short trips in the car will warm up the tires and raise the pressure in them.
Why are my tires full but my tire light is on?
It’s likely that one or more of your tires have low air pressure if you see the tire pressure indicator turn on. However, even if your tires are in good condition, there are a number of things that could cause the sensors to go off, so you shouldn’t rely only on the data from the tire pressure monitoring system of your car.
We’ve talked about some additional aspects of automobile maintenance in this piece. Read these articles if you have some time:
40 PSI—is it too much?
For some vehicles with specs within this range, a pressure of 40 psi may be suitable. But for some other tires, this number can likewise be too high or too low.
For example, sports automobiles or passenger cars may be suitable with a pressure level of 40 psi. However, this is too low for heavy trucks and below the recommended pressure of 35 psi for small cars.
The recommended pressure range for tires on well-known sports cars and passenger vehicles is 32 to 40 psi. Depending on the type of vehicle, a specific index will be given. It should be noted that this level is suggested while the tire is cold, so after a lengthy trip, you must check it again to ensure proper adjustment.
There are many various car models available today, and each will utilize a different type of tire. Therefore, the manufacturer will decide in advance what pressure should be used in each of these tires.
It is your responsibility to maintain the best level for the car to run safely and smoothly. To find out whether or not this 40 psi pressure level is good for your car, you must first verify the tire specifications.
What results from excessive tire pressure?
Less of the tire contacts the ground if tire pressure is too high. Your automobile will consequently jolt around on the road. Additionally, grip is hampered and stopping distances increase when your tires are bouncing rather than being securely planted on the pavement. Additionally, the comfort of the ride will lessen.
How inflated should the tires on my Toyota Camry be?
Wheel Size No matter the type of wheel, the AWD Camry should have all tires inflated to 36 psi. As you can see from the chart above, most 2WD machines need 35 psi in both the front and rear wheels to operate at their best. For convenient access as you work, you can locate these exact numbers on the label on the door frame of your car.