Toyota included a 215/60R16 tire with the 2007 Camry LE.
In This Article...
What type of tires are on the 2007 Toyota Camry?
Depending on the model year and trim level of your Camry, the factory-installed tire sizes include 215/60R16 tires, 215/55R17 tires, 235/45R18 tires, and 235/40R19 tires.
Which tire size is on the Toyota Camry?
Tire sizes available for the 2020 Toyota Camry are P205/65VR16, P235/45VR18, P215/55VR17, and P235/40VR19. Wheel (rim) sizes for the 2020 Toyota Camry include, but are not limited to, 16 X 6.5, 18 X 8, 17 X 7.5, and 19 X 8.5.
What automobiles have a 5×114-3 bolt pattern?
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.
How can I determine my tire size?
Where do I find the size of my tires? There are two places where you may find the tire size for your car and its wheels: Your tire’s sidewall. inside the driver-side door’s frame.
40 PSIis it too much?
For some vehicles with specs within this range, a pressure of 40 psi may be suitable. But for some other tires, this number can likewise be too high or too low.
For example, sports automobiles or passenger cars may be suitable with a pressure level of 40 psi. However, this is too low for heavy trucks and below the recommended pressure of 35 psi for small cars.
The recommended pressure range for tires on well-known sports cars and passenger vehicles is 32 to 40 psi. Depending on the type of vehicle, a specific index will be given. It should be noted that this level is suggested while the tire is cold, so after a lengthy trip, you must check it again to ensure proper adjustment.
There are many various car models available today, and each will utilize a different type of tire. Therefore, the manufacturer will decide in advance what pressure should be used in each of these tires.
It is your responsibility to maintain the best level for the car to run safely and smoothly. To find out whether or not this 40 psi pressure level is good for your car, you must first verify the tire specifications.
What results from excessive tire pressure?
Less of the tire contacts the ground if tire pressure is too high. Your automobile will consequently jolt around on the road. Additionally, grip is hampered and stopping distances increase when your tires are bouncing rather than being securely planted on the pavement. Additionally, the comfort of the ride will lessen.
On a 2007 Toyota Camry, where is the reset button for tire pressure?
Make sure all of the tire pressures are correct first. Start the car’s engine. When the indicator blinks three times, press and hold the reset button that is situated below the steering wheel. For the system to record the pressure of each tire, let the car run for a few minutes. Switch off the car.
Let’s now review the Toyota Camry’s past. Then, we’ll tell you what to do before you reset the tire pressure monitoring light. We’ll also explain what to do if, despite your efforts to reset it, the tire pressure monitoring light persists. The 2007 Toyota Camry and additional crucial facts about tires will next be covered to complete this article.
What is the Toyota Camry’s bolt pattern for 2008?
The bolt pattern for the 2008 Toyota Camry LE is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
What size steering wheel does a 2007 Camry have?
Size of the 2007 Toyota Camry steering wheel The steering wheel size for the 2007 Toyota Camry is 15″ X 3 3/4″ (with a 15″ wheel diameter and a 3 3/4″ grip circumference), and its size category is AXX.
Are the bolt patterns on Toyota vehicles uniform?
Although Toyota’s lug designs differ from model to model, the 5×4 bolt pattern is the most prevalent. Knowing your car’s lug pattern is necessary if you want to acquire a second set of wheels or repair a damaged rim.
Will Toyota wheels fit Honda rims?
Hello, no, your Honda rims won’t fit on your Toyota Corollaat least not the OEM ones. The center bore on your Toyota rims is 54.1mm, whereas the center bore on your Honda rims is 56 or 64mm, despite the fact that the bolt pattern is the same. The center hole in the Toyota rims is too small for the Honda hub, thus they won’t fit on the hub.