The most recent Toyota Camry models come standard with wheels in a variety of sizes, including 17-inch, 18-inch, and 19-inch rims.
In This Article...
How big should my tires be for a Toyota Camry?
Tire sizes available for the 2020 Toyota Camry are P205/65VR16, P235/45VR18, P215/55VR17, and P235/40VR19. Wheel (rim) sizes for the 2020 Toyota Camry include, but are not limited to, 16 X 6.5, 18 X 8, 17 X 7.5, and 19 X 8.5.
How long do tires last?
There is no definitive way to predict how long a specific tire will survive, but there are steps a driver can take to maximize their tire investment and steer clear of using dangerous tires. People typically travel between 12,000 and 15,000 miles each year, therefore the average decent all-season tire will last between three and five years, depending on upkeep, driving habits, and other factors.
According to the National Highway Traffic Safety Association (NHTSA), drivers are three times more likely to be involved in accidents involving damaged tires. When it comes to the condition of tires, safer is wiser, so if there is ever any doubt about tread wear or age, have the tires inspected.
What is the 2018 Toyota Camry’s bolt pattern?
The details listed in the table below pertain to your Toyota Camry.
- The arrangement of bolt holes on a Toyota Camry wheel is known as the “bolt pattern.” 5×114.3 is the notation for a 5 bolt wheel with 114.3 between the two opposing bolt holes.
- Nut Hex Size: The size of the lug nut used on the Toyota Camry is specified in this specification. The nut hex size for all Toyota Camry models is 21.
- Torque for Lug Nuts: Using a calibrated torque wrench to tighten lug nuts during installation is advised. Although lug nuts can be tightened with a socket or impact wrench, the final tightening should be done with a torque wrench to ensure a precise and sufficient force is applied. depending on the vehicle and type of wheel. To get the recommended torque for the lug nuts, please refer to the table below from our Toyota Camry Wheel Specs section.
- Hub Bore: The machined aperture on the back of a wheel that properly centers the wheel on the hub of your Toyota Camry is known as the center bore. The wheels are perfectly positioned while the lug hardware is torqued down because this hole is carefully cut to fit the hub. The likelihood of a vibration will be reduced if the wheel is placed with exact centering on the hub.
- The arrangement of channels, sipes, blocks, and grooves on the tread is known as the tread pattern.
- Nut Bolt Thread Type: A lug nut, lug bolt, or wheel lock’s ability to screw into the wheel stud of your Toyota Camry will depend on the size and pitch of the threads on the nut and bolt.
Very Significant! Always consult your car owner’s manual for the most up-to-date information before working on your Toyota Camry wheels.
How are tires inflated on a 2018 Toyota Camry checked?
That you are being cautious with your new car is fantastic! Observe these procedures to check the tire pressure on a 2018 Toyota Camry:
- Restart your automobile after turning it off. It’s possible that your tires or the sensor itself are malfunctioning if the TPMS indicator illuminates and blinks.
- Start the car’s engine.
- Locate the reset button on the instrument panel’s lower right and press and hold it there while waiting for the TPMS light to flash three times.
- As your vehicle records the tire pressure for each tire, let it run for three to five minutes.
It’s still a good idea to check your tires with a gauge even though this will alert you if your tire pressure is dangerously low. This will enable you to check that each tire is at the recommended tire pressure for 2018 Camrys in cold weather, which is 32 psi.
Why not spend a moment on the Jerry app learning about your insurance options while you’re learning more about your new car? Download Jerry and respond to a few short questions to quickly receive competitive bids. The typical user saves $879 yearly!
How much air pressure should a 2018 Toyota Camry have?
Optimal Tire Pressure No matter the type of wheel, the AWD Camry should have all tires inflated to 36 psi. As you can see from the chart above, most 2WD machines need 35 psi in both the front and rear wheels to operate at their best.
How long should a Toyota Camry’s tires last?
How long do tires on a Toyota Camry last? To extend the life of tires, just proper care and maintenance are required. The Avenues location of Coggin Toyota is here to assist. An typical tire’s tread will wear down in around 3 years if you drive an average of 12,000 to 15,000 miles per year.
Do Toyota tires last long?
Trucks, SUVs, and crossovers are the primary markets for Toyo Tires. Although its performance tires are still well-reviewed, customers prefer Michelin or Pirelli types. Wherever good traction is most important and in challenging terrain, Toyo tires perform effectively.
Here are a few of Toyo’s top-rated tires based on information from TireBuyer:
- An all-terrain tire made for trucks and SUVs called the Toyo Open Country AT II features a “open block tread design for grip in mud, dirt, and icy conditions.”
- Toyo Celsius: A typical touring all-season tire with grip and safety characteristics often found on a winter tire.
- An all-terrain tire for trucks and SUVs with a tread made to last a long time, withstand rough terrain, and deliver improved grip is the Toyo Open Country AT II Xtreme.
- A studless winter tire from Toyo with a three-peak mountain snowflake (3PMSF) classification is called the GSi5.
On TireBuyer, each of the Toyo tires mentioned above has at least a 4.0 out of 5.0 customer review rating. The tire industry generally has good praise for Toyo’s Open Country versions.
Original equipment (OE) and replacement passenger and light vehicle tires from Toyo are covered by a five-year limited warranty. According to the company’s warranty documentation, this safeguards against faulty workmanship and materials on Toyo tires bought by the original owner and placed on the vehicle.
How can I determine my tire size?
Where do I find the size of my tires? There are two places where you may find the tire size for your car and its wheels: Your tire’s sidewall. inside the driver-side door’s frame.
How is a tire size read?
is the proportion of the tire’s cross-sectional height to its width. The aspect ratio is the two-digit figure that follows the slash in a tire size. For instance, the 65 indicates that the height is 65% of the tire’s width in a tire of size P215/65 R15. The sidewall of the tire will be larger the larger the aspect ratio.