Tire size for the 2008 Toyota Camry LE is P215/60R16.
In This Article...
What tire size is used by a Toyota Camry?
Tire sizes available for the 2020 Toyota Camry are P205/65VR16, P235/45VR18, P215/55VR17, and P235/40VR19. Wheel (rim) sizes for the 2020 Toyota Camry include, but are not limited to, 16 X 6.5, 18 X 8, 17 X 7.5, and 19 X 8.5.
What is the Toyota Camry’s bolt pattern for 2008?
The bolt pattern for the 2008 Toyota Camry LE is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
How can I determine my tire size?
Where do I find the size of my tires? There are two places where you may find the tire size for your car and its wheels: Your tire’s sidewall. inside the driver-side door’s frame.
How long should a Toyota Camry’s tires last?
How long do tires on a Toyota Camry last? To extend the life of tires, just proper care and maintenance are required. The Avenues location of Coggin Toyota is here to assist. An typical tire’s tread will wear down in around 3 years if you drive an average of 12,000 to 15,000 miles per year.
What automobiles have a 5×114-3 bolt pattern?
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.
The 5×114 bolt pattern is what?
The stud count (five) and bolt circle measurement (114.3), the notional circle determined by the studs’ centers, make up the 5×114.3 Bolt Pattern or Pitch Circle Diameter (PCD).
Vehicles from Acura, Alpine, Aston Martin, BAIC, BYD, Baojun, and Changan all have the 5×114.3 bolt pattern. The following is a complete list of car makes and models:
What does wheel offset mean?
The distance between the hub mounting surface and the wheel center line is known as the offset of a wheel. The wheel offset is expressed as a positive, negative, or zero offset and is measured in millimeters. When the hub mounting surface is facing the front or wheel side of the wheel, the offset is positive. Positive offsets are frequently found in newer, front-wheel-drive vehicles. When the hub mounting surface is located behind the centerline of the wheels, or to the braking side, the offset is negative. Typically, a negative offset wheel has a “wide lip “With no offset The centerline of the wheel and the hub mounting surface are parallel.
A wheel offset is what? For solutions to all your offset questions, watch this video.
What is the Toyota Camry’s bolt pattern for 2009?
The bolt pattern for the 2009 Toyota Camry SE is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.