Factory is a relative term. It depends on the model you purchase and how your truck is delivered from the dealer. Depending on the model and trim package, we see everything from a 245/75/16 to a 265/70/17.
With pre-facelift 2nd gens, depending on whether you had a limited trim package or not, you have three options for tire size: 245/75/16, 265/70/16, and 265/65/17. With an additional 265/60/18 size offered from the factory, post facelifts offer the same size. Many of these same options are available with the 3rd Gen Tacoma right off the lot, and occasionally a dealership will mount 275s or 285s on a vehicle. It does happen occasionally, though.
Due to their reduced size, the 2WD vehicles came with somewhat smaller tires. The 4.0L XRunner came in a somewhat larger size, 255/45/18, but the 2.7L 2WD only came in one size, 215/70/15.
In This Article...
Will Tacoma’s 32-inch tires fit?
A 32-inch tire will be the most typical setup that we are seeing that is suitable with a leveling system. The standard pairing appears to be a 32-inch diameter and a 9-inch width, or 275/65. You shouldn’t have to cut or trim anything with a leveling kit on your third-generation Tacoma to accomplish this.
What size tire can you put on a Tacoma that is stock?
Nothing catches my eye more quickly than a Tacoma with large tires. Just how good do they look? If you want to perform serious off-roading and overlanding with the Tacoma, you really need to go bigger to notice the wheels and enhance break-over angles. This explains why so many people are interested in learning what tire size will fit comfortably on a stock Tacoma. Can 33 inches fit without a lift? Will you require a front leveling kit or wheel spacers? This essay will provide answers to all of these queries and more.
What size tire can you fit on a Toyota Tacoma that is factory-fresh? The largest tire that will fit on factory rims without a body or suspension lift is 275/70/17. To fit 33-inch tires, or 285/70/17, on a stock suspension, the front fender liner and rear fender flair must be altered.
Therefore, there are three things to think about before upgrading the factory tires on your truck or ute.
- Clearance for fender liners
- Wheel offset and backspacing
- spare wheel room
Since the 275/70/17 tire is narrower but still offers more ground clearance with the 70 profile, which is 1 inch taller but the same width as the factory, you can get away with installing a wider tire on the stock Tacoma rims.
But what if you want to travel 33 miles per hour with a factory suspension and a 0 offset wheel? What adjustments are necessary to make them fit?
The height of 275 70R17 tires.
275/70R17 tires have a 32.2″ diameter, a 10.8″ section width, and a 17″ wheel diameter. They had a 101.0″ circumference and 627 rotations per mile. They can typically be put on 7-8.5″ wide wheels.
Can a Tacoma with stock tires fit 275 tires?
Stock 2022 Toyota Tacoma tires have a maximum overall diameter and breadth of 32.5 inches and 275 millimeters, respectively. Various Tacoma models’ wheel diameters will determine the precise tire aspect ratio.
We appreciate you reading and hope that we were able to clarify the largest tire size that would fit on a stock Tacoma. Please read these excellent articles about Toyota for more fascinating reading.
The height of a 265 75R16 tire.
265/75R16 tires have a section width of 10.4, are 31.6 tall, and suit wheels that are 16.5″ in diameter. 99.4 miles is the circumference, or 638 revolutions per mile. They can typically be placed on wheels with a rim width of 16 x 7-9 (LT Tires 7-8).
With 20-inch rims, is I able to off-road?
The advantages of 20 wheels over 17 wheels are a topic on which there are many differing views. There are some who fervently support 17-inch off-road wheel configurations, while there are others who favor 20-inch off-road wheels. It is true that a 17-inch wheel performs a little bit better because it has a longer sidewall on the tire. Better off-roading capabilities and a smoother ride are provided by this. Having said that, it is quite safe to operate a 20-wheel vehicle that excels on both paved and rough terrain. However, the 20 has the extra advantage of being more aesthetically acceptable to a wider audience, particularly those who don’t off-road much or at all.
A 265 65R17 is what size tire?
The 265/65R17 tire is 30.6 tall, has a section width of 10.4, and fits 17-inch wheels. With a 96.0 circumference, there are 660 revolutions per mile. They can typically be installed on wheels with a rim width of 17 x 7.5 to 9.5.
What is the diameter of a 265 70R17 tire?
The section width of a 265/70R17 tire, which measures the width of the tire from its inner to its outer sidewall, is 10.4 inches. The largest size of wheel that can accommodate the tire’s mounting is one with a rim diameter of 17 inches. The distance between the wheel rim and the top of the tire tread is measured as sidewall height, which is 7.3 inches (186 mm). The tire’s outside diameter is represented by the overall diameter of 31.7 inches (804 mm), which also denotes the height of the tire. The tire’s outer perimeter measures 99.5 inches (2524.6 mm) in circumference. The number of tire rotations represents how many times a tire turns when traveling a given distance in miles or kilometers. the 265/70R17 tire rotates at 637 miles per hour (396 revolutions per kilometer).
What size lift is appropriate for a Tacoma?
Bigger is always better, right, if larger lifts and tires result in more lift? Well, it could look good, but the extra cost isn’t always justified. When deciding which kit to pursue, you must consider the terrain your Tacoma will be driving on.
A leveling kit or 2 kit should be adequate for moderate trail use. You might wish to increase the lift to a 3-4 when you enter harsher terrain when the trail is littered with huge boulders and stumps. A 6 lift is significantly more suited when dealing with even bigger challenges, such as full-on rock crawling or anything comparable.
When purchasing big kits like a 6, be sure to pay close attention to suspension travel as well. Longer travel will aid in maintaining the truck’s stability when traversing rocky, uneven terrain.
Will 33 tires fit a Tacoma with stock wheels?
No and yes. You can put 33s on your car without making any adjustments and drive straight without any problems. There are issues when you turn. It takes very little cutting and spacers to completely clear 33 tires without a lift.
Without using wheel spacers, we initially installed the 33s on our third-generation Tacoma. However, once you turned, the tires rubbed horribly on the upper control arms. The rubbing on the body wasn’t all that severe, and you could drive on them with little contact on the fender plastics.
When we installed 33s on a lifted 2nd Gen Tacoma even with aftermarket control arms and a lift, we encountered the same problem. While the friction on the body was barely noticeable, it was intolerable on the control arm. The truck is not appropriate to drive and is absolutely not suitable for off-road travel with just one problem.
The rubbing on the 3rd Gen Tacoma’s UCAs was gone after we installed a 1.25 spacer, however the rubbing on the body was quite unpleasant because we extended our scrub radius by extending the tire outward.
No, you can’t simply install wheel spacers and trim the fenders and fender well plastics to fit 33s on a Tacoma.
Spend some time making room for that size tire in order to fit 33s without using a lift. Both on- and off-road testing should be done in this.
Will 33 tires fit a stock Tacoma?
Sure and no. Installing 33s on your vehicle without making any alterations will let you to drive straight without any problems. When you turn, issues occur. A small amount of cutting and spacers are needed to completely pass 33 tires without lifting.
The 33s were first installed on our third-generation Tacoma without the use of wheel spacers. Although there wasn’t much rubbing on the body and you could drive on them with only a little contact on the fender plastics, as you turned, the tires scraped horribly on the upper control arms.
The identical problem occurred when we installed 33s on our lifted 2nd Gen Tacoma, even with aftermarket control arms. Although there was hardly any friction on the body, it was excruciating on the control arm. The truck cannot be driven and is unfit for off-road travel simply due to this problem.
The rubbing on the UCAs was eradicated after we installed a 1.25 spacer on the 3rd Gen Tacoma, however the rubbing on the body was quite unpleasant because we extended our scrub radius by extending the tire outward.
No, cutting the fenders and fender well plastics as well as adding wheel spacers are necessary in order to put 33s on a Tacoma.
It will take some time to make room for that size tire if you want to fit 33s without using a lift. This ought to involve both on- and off-road testing.
Will stock Tacoma fit 265 70R16?
Realistically, the answer is 32 if you are using standard suspension and don’t want to wreck your truck.
The stock tire size for my Tacoma (265/70R16) was 30.610.4. If you don’t want to alter your truck in any way, switching to a little larger tire size (265/75/1631.610.4) is the best option. Make sure the tire you choose is a real 32 tire or one that is very near to it.
Some tires may measure 32.8 inches, which is actually a 33-inch tire, and you will undoubtedly experience some rubbing problems. I recently chatted with an off-road enthusiast who drives a Toyota Tacoma stock with 33 tires. He told me that in order to make the configuration work, he had to drastically cut back his cab mount and raise his fender liners.
Therefore, it is possible to run 33 tires on a stock Tacoma, but you will need to make significant cuts.
Are 275 and 33 tires equivalent?
Like most drivers, you probably only consider the tire size of your car from a purely aesthetic standpoint. However, tire size affects how well your car handles and performs. Do you want to replace your tires but are unsure if 275 and 33 tires are equivalent? We have your back. These are the results of the research we conducted on this subject.
33 tires are not the same as 275 tires with a 20-inch diameter and a 60 aspect ratio.
To find out more about 275 tires, keep reading. We’ll also go over how to recognize high-quality tires and highlight some tire maintenance advice to help your tires live longer. Let’s begin immediately.
We hope the links provided are helpful to you before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!