Tire sizes available for the 2019 Toyota Camry are P205/65VR16, P235/45VR18, P215/55VR17, and P235/40VR19. The wheel (rim) sizes available for the 2019 Toyota Camry are 16 x 6.5, 18 x 8, 17 x 7.5, and 19 x 8. The tire specifications for each 2019 trim are listed in the table below.
In This Article...
What automobiles have a 5×114-3 bolt pattern?
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.
The 5×114 bolt pattern is what?
The stud count (five) and bolt circle measurement (114.3), the notional circle determined by the studs’ centers, make up the 5×114.3 Bolt Pattern or Pitch Circle Diameter (PCD).
Vehicles from Acura, Alpine, Aston Martin, BAIC, BYD, Baojun, and Changan all have the 5×114.3 bolt pattern. The following is a complete list of car makes and models:
Will Toyota wheels fit Honda rims?
Hello, no, your Honda rims won’t fit on your Toyota Corolla—at least not the OEM ones. The center bore on your Toyota rims is 54.1mm, whereas the center bore on your Honda rims is 56 or 64mm, despite the fact that the bolt pattern is the same. The center hole in the Toyota rims is too small for the Honda hub, thus they won’t fit on the hub.
How can I tell which wheels fit my car?
The two simplest methods are to look at your car’s sticker plate, which should be inside the driver-side door, or to search online for the precise make and model of your car’s characteristics. You can get the typical rim size from there.
Q: What rims are interchangeable between different cars?
Fortunately, any car has a replaceable rim available. All you need to do is make sure the new wheel’s bolt patterns, size, and offset match those on the old one.
By looking at the sticker label on the inside of the driver’s door or measuring the rim, you may determine the new wheel’s proper size. Take your car to a mechanic if you are not the do-it-yourself kind.
Q: What cars use a 5114 3 bolt pattern?
A wheel hub with 114, 3 and 5 bolts or nuts is all that a 5114 3 bolt pattern is. 5114,3 bolt designs are used by various car manufacturers and models.
What is the 2010 Toyota Camry’s wheel bolt pattern?
The bolt pattern on the 2010 Toyota Camry SE is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
Is 5×100 equivalent to 5×114 three?
The only difference between them is that one is measured in inches and the other in millimeters. It’s possible that a set of wheels with the measurements 5×100/5×114. 3 will fit both bolt patterns and have 10 lug holes drilled into the center bore of the wheel to accommodate this.