superior than commonly used stamped steel or cast iron. built to last the lifetime of your car.
In This Article...
Finish off with a torque wrench
When you’re done, tighten the filter cap with a 3/8 drive torque wrench. 18.5 ft-lbs of torque is advised (or 25Nm). Never use an impact tool.
Description
The 14-flute design is in accordance with OEM guidelines and is ideal for removing oil filters and cartridge style filter systems from the following vehicles: Toyota Camry V6; Lexus ES, GS, IS, LX, NX, RC, RX; Land Cruiser; FJ; Highlander; RAV4; Tacoma; Tundra; and Venza. The oil filter housing is held in place by a 14-flute wrench, making removal simple and preventing cap stripping. The wrench is engineered to last the lifetime of your vehicle out of sturdy forged aluminum. Its quality greatly beyond that of other wrenches’ standard cast iron and stamped steel. This wrench resists corrosion and rust thanks to a specific anodized treatment finish in gunmetal.
What equipment will I require to replace the oil in a 2016 Toyota Camry?
Tools & Equipment for Oil Change on a 2016 Toyota Camry
- Oil Drain Plug Socket, CTASquare.
- Aluminum Cap Style Oil Filter Wrench CTA14 Flutes 64 mm.
- Heavy Duty Die-Cast Aluminum Cap Style Oil Filter Wrench CTA14 Flutes 64 mm.
- Drain Pan, DormanChampTM, 3.5 gal.
- 3.75 gal. DormanChampTM Plastic Drain Pan
- WIXOil Analysis Tool.
How big of a socket will I need to remove the oil filter?
The head of a fastener, such as a nut or bolt, can be tightened or loosened with a socket wrench. It has a long handle to which various sized sockets can be fitted in order to tighten various sized fasteners. The socket wrench may occasionally have a ratchet handle that enables continuous turning without having to lift the instrument. It’s crucial to select the size socket wrench that matches the specific hardware for each individual project.
There are four standard socket sizes: 1/4 inch (0.6 cm), 3/8 inch (0.9 cm), 1/2 inch (1.3 cm), and 3/4 inch (1.9 centimeters). Additionally, different-shaped sockets are available, including six-point (hexagon), eight-point (double square), and 12-point, to fit different bolt heads (double hexagon). You run the risk of breaking the tool and hurting your hands if you select a socket that is too large. Additionally, certain socket wrenches are deeper than usual to accommodate bolts with protruding threads.
You must choose the right size socket wrench before starting a project, like changing the oil on your car. To allow the used oil to drain from the engine, you must first remove the oil drain plug using a socket wrench. Start the car up first to get the engine warmed up. This makes the oil thinner, enabling smooth drainage. After that, put jack stands under the vehicle, fully engage the parking brake, and switch off the engine. Next, look for the drain plug underneath the car; the hot engine should still have some heat left in it. The drain plug’s nut should be covered by a 3/8-inch (0.9 centimeters) socket, which should be inserted into the socket wrench and turned counterclockwise. The oil drain plug should be simple to open, allowing the used oil in the engine to be drained. To catch all the dripping oil, lay a bucket and some newspaper under the car’s engine.
How can a Toyota oil filter be removed without a wrench?
The Toyota oil filter can be removed at a low cost by using sandpaper. You may easily create a tight grip over the oil filter by wrapping the sandpaper over it. After ensuring that your sandpaper is well wrapped, simply pull it in the other direction. The force generated produced by doing so will enable you to remove the Toyota oil filter without the use of a wrench.
Is there an oil filter wrench made by Toyota?
Because they are machined in the USA from high-quality 6061 T5 aluminum, our Toyota oil filter wrenches are far stronger than cast or stamped alternatives. Additionally, we went a step further and strengthened the 3/8″ drive hub (anodized red) by fortifying it with tougher 7075 aluminum.
What kind of oil is recommended for a 2016 Toyota Camry?
Both 0W-20 and 5W-20 motor oils are compatible with the 2016 Toyota Camry, while 0W-20 is recommended. What kind of oil is required should be indicated on the oil cap in the car’s engine. You could also consult your car’s owner’s manual.
The majority of auto parts store employees—especially for a popular vehicle like the Corolla—will know what kind of oil your car requires if you simply provide them with the make, model, and year. This makes things even simpler.
A licensed broker app and comparison tool for auto insurance, Jerry provides free, individualized quotes. We’ll handle all the paperwork, place the calls, and even assist you in canceling your previous policy to get you set up with your new provider.
The typical user saves more over $800 annually and it just takes 45 seconds to download Jerry!
In a 2016 Camry, how frequently should I replace the oil?
For traditional oil, Toyota advises changing your 2016 Toyota Camry’s oil and filter every 3,000 to 5,000 miles. Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles.
I should put how much oil in my Camry?
For instance, a 4-cylinder engine needs at least 5 quarts of oil, whereas a 6-cylinder engine needs about 6 quarts.
What volume of oil does a Toyota Camry consume?
Depending on the engine and model year, the Toyota Camry can hold between 3.8 and 6.4 quarts (3.6 and 6.06 liters) of engine oil.
What type of socket do I require?
Choose the first decimal in the table’s decimal column that is greater than your caliper reading. Choose the relevant fraction. A table displaying Imperial (American) socket sizes can be found on the website Sizes. It is the size of your nut and the necessary socket if the fraction is listed.
What kind of wrench is required for an oil change?
To remove the oil drain plug, you’ll need a ratchet and socket set. To remove and install the oil filter, you’ll also need an oil filter wrench (or perhaps just a strong grip).
Is it sufficient to hand-tighten an oil filter?
The information on product costs and availability is correct as of the specified date and time but is liable to change. This product can be purchased using any pricing and availability details that are shown on [relevant Amazon Site(s), as applicable] at the time of purchase.
Oil filters should, as a general rule, be hand tight plus an additional quarter turn. By doing this, the filter will be safe but not too tight. Overtightening can harm the filter or your car and make it more challenging to take the filter out in the future.
Oil filter pliers should be used because it is challenging to complete the final quarter turn by hand. They come in a variety of shapes and sizes, but the important thing is that they give you the leverage and grip needed to correctly tighten the filter.
Toyota oil filters: Are they all the same?
Keep in mind that not all oil filters conform to Toyota’s exacting requirements. A non-Toyota filter element can not function as well and even clog, costing your engine money. Always specify a Genuine Toyota oil filter to save your engine (and your wallet).