The 1.8 L 4 Cylinder engine in the 2016 Toyota Corolla requires 0W-20 Synthetic Motor Oil in all weather conditions. If 0W-20 is not available, it is acceptable to use 5W-20; nevertheless, when it comes time for the next oil change, you must switch back to 0W-20. With a filter, the automobile has a capacity of 4.4 quarts. A new washer should be put on the drain bolt, and the drain stopper should be torqued to 27 ft/lbs. Oil will keep the engine running and clean. However, it does not last forever, which is why we occasionally need to change the oil. Every 3,000 to 5,000 miles on the Corolla, you should change the oil and filter.
A 2016 Toyota Corolla should use SAE 0W-20 full synthetic engine oil as its recommended oil type. The 1.8 L 4-cylinder engine of the Corolla has a 4.4 quart oil capacity with a filter.
In This Article...
What kind of oil is recommended for a 2016 Toyota Corolla?
The good news is that the 1.8L I 4-cylinder engine is the same in every 2016 Toyota Corolla.
The Toyota Corolla from 2016 uses SAE complete synthetic motor oil. With the filter, it has a total oil capacity of 4.4 quarts, which you need routinely top off and replace to keep the system in good shape.
Keep in mind that full synthetic oil works best with this model. According to Mobil, because full synthetic oil is produced with fewer impurities, it improves the performance and protection of your car.
Even though they could be more expensive to use while getting your oil changed, full synthetic mixes typically outperform synthetic blends and conventional motor oils. Higher-quality oils could make your car last longer so you can keep it for a long time.
What capacity does a 2016 Corolla have for oil?
The engine oil volume of the 2016 Toyota Corolla is precisely 4.4 quarts, or 140.8 ounces. That translates to 4.16 liters for someone who lives abroad. That is the amount of fresh oil you should prepare to purchase each time you change the engine oil and the amount your Corolla will be able to hold.
What kind of oil does a 2016 Toyota Corolla need?
We now know how much oil your Corolla need, but what kind? Various makes and models need different products, and not all engine oils are created equal.
The 2016 Corolla uses SAE full synthetic engine oil, therefore the first thing to keep in mind is that you should only use items that are clearly marked as such.
The thickness or viscosity of the oil, which is denoted by a number along with the letter W, followed by another number, is another important consideration when choosing an oil type. This indicates the viscosity of the oil during the winter (0F) and during the summer (212F).
For the 2016 Toyota Corolla, for example, 5W-30 grade oil is recommended. However, unlike some vehicles, the Corolla isn’t very picky about its oil; you may even use 10W-30 or 0W-20 if you’d like; just be aware of that first number and your local environment. Toyota owners in cold climates should continue using the 5W or even 10W option.
Now that you are aware of the kind of oil you need, let’s go more precise. What brands provide adequate viscosity oil of high quality? If you’re unsure which product to purchase, think about these three possibilities:
The original equipment manufacturer (OEM) oil that Toyota manufactures and includes in each new vehicle is typically the best choice for Toyota vehicles. Genuine Toyota Engine Oil is available online and at the majority of auto parts retailers.
Something different: Mobil 1 Full Synthetic Motor Oil 5W-30 is a wonderful substitute for Toyota’s oil if you’d prefer not to use it.
For Corollas with high mileage: If your 2016 Corolla has a lot of miles on it, Valvolines Full Synthetic High Mileage MaxLife 0W-20 Motor Oil can be a good choice.
What is engine oil 0W-20?
In colder temperatures, 0W-20 motor oil flows as freely as 0 Weight oil, but once the engine reaches operating temperature, it behaves more like 20 Weight oil. This guarantees that oil will begin to flow through the engine right away, lubricating important engine components even in cold weather.
The ‘W’ in viscosity descriptions does not, contrary to popular belief, stand for weight. In actuality, it represents Winter. This means that synthetic 0W-20 oil performs as a 0 Weight oil in cold areas but becomes as thick and viscous as a 20 Weight oil once the typical engine temperature has been attained.
Castrol EDGE, a cutting-edge full synthetic 0W-20 motor oil, is part of the company’s line of low viscosity 0W-20 lubricants. It is our toughest oil and is made to endure high temperatures and pressure. For those who want to push their car to the limit, it’s the perfect choice. Full synthetic 0W-20 motor oil liquid Castrol GTX MAGNATEC is designed with protective, clever ingredients that offer outstanding wear prevention.
How often should an oil change be performed on a 2016 Toyota Corolla?
For traditional oil, Toyota advises changing your 2016 Toyota Corolla’s oil and filter every 3,000 to 5,000 miles. One of the most essential and practical procedures for your car is an oil change. Typically, synthetic oil needs to be changed every 7,500 to 10,000 miles.
Toyota 0W-20 oil is synthetic, right?
Toyota car owners now favor the new 0W-20 Oil over other types of oils. The cost of a quart of the pure synthetic 0W-20 oil is approximately $6.36. Although a quart costs quite a bit, it is the best oil you can use in your Toyota. The use of synthetic oil is spreading.
Toyota Corollas: Do they require synthetic oil?
Only Solution. Only Toyota cars (apart from 3UR-FBE Engines*) that require 0w-20 synthetic oil have been given the go-ahead for longer oil change intervals of 10,000 miles or 12 months. (You should, though, keep checking the oil level frequently and topping off as necessary.
Will 5W-30 work in a Toyota Corolla?
* Recommended viscosity (SAE): SAE 0W-20, 5W-20, or 5W-30 engine oil is advised in severely cold temperatures since SAE 10W-30 or a higher viscosity engine oil may make it difficult to start the engine.
Here is an explanation of oil viscosity using 0W-20 as an example.
The characteristic of the oil that allows for cold starting is indicated by the 0W component of the oil viscosity rating. Engine starting in cold conditions is made easier by oils having a lower value before the W.
The number 20 in 0W-20 denotes the oil’s characteristic viscosity at high temperatures. If the vehicle is run at high speeds or with a heavy load, an oil with a higher viscosity (higher value) may be more appropriate.
How frequently should 0W-20 oil be replaced?
The manufacturer has approved an oil change interval of 10,000 miles or 12 months for Toyota vehicles that utilize 0w-20 synthetic oil. When using this type of oil, vehicle owners should periodically check the engine’s oil level and top it off as necessary. This will enhance the effectiveness of the synthetic oil. The 10,000-mile oil change interval has NOT been approved by Toyota if you operate a Toyota Tundra or Toyota Sequoia that is fitted with a flex fuel-compatible engine.
Some engines may safely run on 0w-20 synthetic oil despite being tuned to run on 5w-20 mineral oil. Even if synthetic oil is used, these engines will still require the 5,000-mile/six-month oil change period.
Other maintenance tasks
Owners shouldn’t disregard the other maintenance requirements of their car just because it has a longer time between oil changes. Despite the fact that the oil only needs to be changed once a year, or after 10,000 miles, the 5,000-mile services are still necessary. This would cover procedures like brake inspections and tire rotations.
Toyota continues to demand the 5,000-mile/six-month interval from owners who frequently make short journeys in below-freezing weather, drive on dirt roads, off-road, or tow big loads. Even if an owner uses synthetic oil, this is still true.
An oil change for a 2016 Toyota Corolla costs how much?
A Toyota Corolla oil change typically costs between $119 and $133. Between $46 and $58 is the expected cost of labor, while between $73 and $74 is the estimated cost of parts.
How durable are synthetic oils?
Synthetic oil has evolved since it was first developed in 1929, going from powering warplanes to everyday cars. In the last three years, the shift to synthetics has been most noticeable, with more than two-thirds of new cars requiring full or blended synthetic oil. Finding out how long synthetic oil lasts has become more crucial as a result of this influx.
How long does synthetic oil remain effective? The typical lifespan of synthetic oil is 6 to 12 months, or 7,500 to 10,000 miles, before it needs to be replaced. This is merely a rough estimate, and it could vary depending on the type of oil you use, how old your car is, and the road conditions.
Your Owner’s Manual
Although it’s really easy, owners manuals are frequently disregarded. To find out the appropriate viscosity of the motor oil you should use, always consult your owner’s handbook. Use the 0W20 and 5W20 variations interchangeably, depending on the weather, if they are both on the list.
Location
Given that both 0W20 and 5W20 motor oils operate in much the same temperature range, it is critical to think about where you will be using the car. The operating temperature range for synthetic oil is -40C to 20C for 0W-20 and -35C to 20C for 5W20 (5W20 synthetic oil). Being aware of these facts means two things:
- If you reside in a region with extremely low temperatures, such as Alaska or Maine, it is preferable to use 0W20 oil.
- In places like Florida when the temperature is above 20C/68F, you cannot use either 0W20 or 5W20.
Viscosity
The motor oil will flow more smoothly the lower the number is. At beginning temperatures, a 0W20 will be more fluid than a 5W20, but both will function similarly at normal engine operating temperatures. Keep in mind that engine oils naturally become thinner during heating and thicken while cooling.
Quality Testing
Any oil brand with the appropriate viscosity grade and the API donut symbol is acceptable. The oil has passed the testing required for SL service, as indicated by the starburst sign.
The API donut indicates that your motor oil passed the current SL service rating test after being tested by the American Petroleum Institute. ACEA (Association des Constructeurs Europeens d’Automobiles) is the counterpart of API in Europe.
Manufacturer Requirements
If your vehicle is substantially loaded, the machine designer would typically advise using an oil that has a high viscosity and is heavy like honey. However, if it moves quickly, a lubricant that can move out of the way and then move back in is preferable.
Fuel Economy
Despite the fact that both 5W20 and 0W20 (0W20 synthetic oil) can be used at 20C/68F, 0W20 is thinner than 5W20 at cold engine temperatures, particularly in the initial minutes after starting your automobile. Because it gives the car slightly higher fuel economy than the 5W20, new models specify it. The 0W20 model satisfies a turbo-diesel engine’s requirements as well.