We’ve written in-depth articles about the Toyota Camry and answered a lot of your questions about it. Today, we’ll discuss the knowledge you’ll need to choose the best new tires or rims for your Toyota. We’ll focus on the bolt pattern for each generation in particular. Let’s begin with a brief response:
All Toyota Camry generations built after 1994 feature a center bore of 2.37 inches (60.1mm), a bolt pattern of 54.5 (5114.3mm), and five lug nuts with a thread size of M12 x 1.5 that need to be tightened with 76 lb-ft (103Nm) of force.
That, however, hardly captures the entire picture. For each iteration, we’ve provided a more thorough description of the bolt pattern below. We also go through the individual lugs/bolts used, the center bore hub’s exact diameter, and the bolt torque requirements. Additionally, we have details on the precise tire and rim sizes for each engine type. You should be well aware of what you can and cannot purchase in this manner. Read on!
In This Article...
What is the 2009 Toyota Camry’s lug pattern?
The bolt pattern for the 2009 Toyota Camry SE is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
What is the Toyota Camry SE’s bolt pattern for 2020?
The details listed in the table below pertain to your Toyota Camry.
- Nut Bolt Thread Type: A lug nut, lug bolt, or wheel lock’s ability to screw into the wheel stud of your Toyota Camry will depend on the size and pitch of the threads on the nut and bolt.
- Nut Hex Size: The size of the lug nut used on the Toyota Camry is specified in this specification. The nut hex size for all Toyota Camry models is 21.
- Hub Bore: The machined aperture on the back of a wheel that properly centers the wheel on the hub of your Toyota Camry is known as the center bore. The wheels are perfectly positioned while the lug hardware is torqued down because this hole is carefully cut to fit the hub. The likelihood of a vibration will be reduced if the wheel is placed with exact centering on the hub.
- The arrangement of channels, sipes, blocks, and grooves on the tread is known as the tread pattern.
- Torque for Lug Nuts: Using a calibrated torque wrench to tighten lug nuts during installation is advised. Although lug nuts can be tightened with a socket or impact wrench, the final tightening should be done with a torque wrench to ensure a precise and sufficient force is applied. depending on the vehicle and type of wheel. To get the recommended torque for the lug nuts, please refer to the table below from our Toyota Camry Wheel Specs section.
- The arrangement of bolt holes on a Toyota Camry wheel is known as the “bolt pattern.” 5×114.3 is the notation for a 5 bolt wheel with 114.3 between the two opposing bolt holes.
Very Significant! Always consult your car owner’s manual for the most up-to-date information before working on your Toyota Camry wheels.
What automobiles have a 5×114-3 bolt pattern?
Honda Civic or Mazda Accord, Nissan Qashqai, Dacia Duster, Hyundai i30 and x35, Renault Megane III and Laguna III, Kia Cee’d, Sportage and Venga, Mitsubishi Lancer, Outlander and ASX, Toyota Auris and Avensis III, Citroen C-Crosser, Suzuki SX4, Fiat Sedici, Mazda 3 are the most popular vehicles with PCD 5×114,3.
A Toyota Camry can fit what size wheels?
Tire sizes available for the 2019 Toyota Camry are P205/65VR16, P235/45VR18, P215/55VR17, and P235/40VR19. The wheel (rim) sizes available for the 2019 Toyota Camry are 16 x 6.5, 18 x 8, 17 x 7.5, and 19 x 8. The tire specifications for each 2019 trim are listed in the table below.
A 2017 Toyota Camry has what kind of lug pattern?
The bolt pattern for the 2017 Toyota Camry 4cyl LE is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
Is 5×100 equivalent to 5×114 three?
The only difference between them is that one is measured in inches and the other in millimeters. It’s possible that a set of wheels with the measurements 5×100/5×114. 3 will fit both bolt patterns and have 10 lug holes drilled into the center bore of the wheel to accommodate this.
What is the Toyota Camry’s bolt pattern for 2008?
The bolt pattern for the 2008 Toyota Camry LE is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.