You should exercise caution because putting the incorrect type of oil in your car might seriously harm the motor. Synthetic motor oil of the grade 5W-20 is required for the 2010 Toyota Corolla to operate effectively.
Ask the staff member at your nearby auto parts store for advice on the best oil for your automobile if you have any extra queries regarding motor oil brands and grades. Most staff members will be pleased to assist you in finding the proper oil for your vehicle so you may keep on driving safely.
Check out the Jerry app to discover more about your alternatives for auto insurance while you’re learning about your car’s oil type. For additional information, download the app and respond to a few short questions.
In This Article...
Will 5W 30 work in a Toyota Corolla?
* Recommended viscosity (SAE): SAE 0W-20, 5W-20, or 5W-30 engine oil is advised in severely cold temperatures since SAE 10W-30 or a higher viscosity engine oil may make it difficult to start the engine.
Here is an explanation of oil viscosity using 0W-20 as an example.
The characteristic of the oil that allows for cold starting is indicated by the 0W component of the oil viscosity rating. Engine starting in cold conditions is made easier by oils having a lower value before the W.
The number 20 in 0W-20 denotes the oil’s characteristic viscosity at high temperatures. If the vehicle is run at high speeds or with a heavy load, an oil with a higher viscosity (higher value) may be more appropriate.
The 2010 Toyota Corolla uses how much oil?
Let’s get right to the point: the 1.8-liter 4-cylinder engine in the 2010 Toyota Corolla has a 13.2-gallon oil capacity. And sure, regardless of the trim or model you own, the oil capacity stays the same. Your engine will still require 13.2 gallons of oil whether you drive a 2.4-liter 4-cylinder XRS sedan or a manual transmission.
Pro tip Do not equate oil capacity with your engine’s displacement or the 1.8-liter volume the cylinders occupy. Never mix up these numerals since they stand for different things.
What kind of oil does a 2010 Toyota Corolla need?
Okay, so now that we’ve discussed the engines oil capacity, you’ll also need to think about the type of oil required to keep everything functioning properly. Don’t just grab any old oil off the shelf; look for SAE 5W-20 grade full synthetic oil instead.
What do we actually mean by SAE 5W-20 oil then? The viscosity of the oil is shown by the numbers, which essentially just indicate how thick it is. The oil has a low viscosity at 0F if the number 5 is placed before W, which stands for winter, and maintains a relatively thin consistency even at 212F.
It’s important to follow the manufacturer’s advice, so look for Toyota original motor oil or an alternative that complies with the International Lubricant Specification Advisory Committee’s (ILSAC) 5W-20 recommendations.
Your engine will run at its peak efficiency and be protected from harsh aging if you use the right oil. This is so because synthetic oil is created specifically with more stable synthetic chemical components, which makes it more resistant to deterioration.
To acquaint yourself with possibilities, you can explore online for oil before visiting the store, but your neighborhood car parts and service shop should be able to give you the complete lowdown on what’s best. Use the Toyota-approved alternative, Mobil 1 Advanced Fuel Economy 0W-20 Full Synthetic Motor Oil, if in doubt.
Is full synthetic oil required for a Toyota Corolla?
Only Solution. Only Toyota cars (apart from 3UR-FBE Engines*) that require 0w-20 synthetic oil have been given the go-ahead for longer oil change intervals of 10,000 miles or 12 months. (You should, though, keep checking the oil level frequently and topping off as necessary.
Recommended Oil Change Intervals for Toyota Vehicles
You were supposed to replace your oil every three months or 3,000 miles, whichever came first, according to an old proverb. This is no longer the case, though, as engine technology has developed and become more effective. Toyota advises consumers to have their vehicle’s oil changed professionally or by themselves every six months or five thousand kilometers, whichever comes first.
Recommended Oil Viscosity for Toyota Models
Toyota owners who enjoy DIY projects might be interested in changing their own car’s oil. We endorse this course of action because it offers customers a lot more cost-effective option than even bringing their car to one of the more reasonably priced service facilities nearby. Make sure you are using the right oil if you plan to change your Toyota’s oil on your own. Naturally, as Toyota Genuine Motor Oils are created exclusively for use with Toyota engines, we advise using these. But another choice that is suitable as well is synthetic oil with a viscosity of 5W-30!
What manufacturer of motor oil does Toyota use?
For brand-new vehicles, Toyota suggests using Toyota Genuine SAE 0W-20 Full-Synthetic motor oil. Older models might need Toyota Genuine 5W-30 motor oil; if in doubt, check with one of our service consultants or the owner’s manual.
Can I replace the 5W-20 in my Toyota with the 5W-30?
It is generally not advised to substitute 5w30 oil (or any other oil weight) for 5w20 oil because even a small viscosity change has the potential to harm your engine.
Because your engine was developed with 5w20 oil in mind when it was constructed, all of the parts that come into contact with it must be a specified viscosity after the engine hits operational temperature, or 212.
5w20 oil will have a lower viscosity than 5w30 oil at this temperature; it will flow more easily and with less resistance. When 5w30 is used in place of 5w20, the engine will experience increased oil resistance once it reaches working temperature, which the engine is not built to manage.
If you substitute 5w30 oil for 5w20 when doing so is not advised or authorized by the owners handbook, it could violate your car’s powertrain warranty, impair engine performance, and ultimately harm your engine.
Using the proper oil keeps your engine operating at its best.
use Jerry to be sure you maintain it covered with the appropriate insurance policy. As the leading broker and comparison app for auto insurance in the country, Jerry makes it simple to locate and compare affordable quotes, helping users save $887 annually on their auto insurance.
What makes 0W-20 and 5W-20 different from one another?
The ability of an oil to flow is measured by its viscosity. It also describes the thickness of the oil at various temperature levels.
When operating in freezing temperatures, 0W-20 motor oil performs like an SAE 0W weight oil. While 5W-20 oil functions as an SAE 5W weight oil.
The better the motor oil performs at low temperatures, according to SAE nomenclature, the lower the number before the ‘W’ is. Since 0W20 is much thinner than 5W-20, it is more stable at low temperatures and flows easily through the essential engine components.
A more suitable oil for a typical operating temperature range of -22F to 68F is 5W-20, which has a viscosity that is relatively thicker.
What is the purpose of 5W-30 motor oil?
Generally speaking, 5W-30 motor oil is a winter viscosity grade. Although it functions satisfactorily at greater temperatures, its best application is for drivers in colder climates.
It is often advised for petrol vehicles or a light-duty diesel engine because of its lower viscosity. In addition to these uses, 5W-30 multigrade oil is also employed for the following things:
- For low-duty application in light vehicles and passenger cars
- For engines not operating under excessive pressure
- Since it is less prone to thermal breakdown, it is better for drivers who frequently experience temperature fluctuations.
- Some individuals might switch to this oil in the winter because it offers superior engine protection and aids in removing engine deposits in lower temperatures.
Let’s look at some of the most frequently asked questions regarding 5W-30 motor oil now that we understand what it is used for.
Can I substitute 0W-20 oil for 5w20 oil?
The 20 in 0W motor oils (also known as 0W-20) stands for the viscosity measurement value, making them appropriate for usage in 5W applications. The most important factor to match when choosing a motor oil is that value. The pumpability at cold temperatures is shown by the 0W or 5W. Consequently, a 0W would flow more freely than a 5W and might be a suitable replacement. As a result, SAE 0W-20 can be used in place of SAE 5W-20 application.
**Provides improved fuel economy and faster flow while yet offering the same level of protection as 5W.
What is engine oil 0W-20?
In colder temperatures, 0W-20 motor oil flows as freely as 0 Weight oil, but once the engine reaches operating temperature, it behaves more like 20 Weight oil. This guarantees that oil will begin to flow through the engine right away, lubricating important engine components even in cold weather.
The ‘W’ in viscosity descriptions does not, contrary to popular belief, stand for weight. In actuality, it represents Winter. This means that synthetic 0W-20 oil performs as a 0 Weight oil in cold areas but becomes as thick and viscous as a 20 Weight oil once the typical engine temperature has been attained.
Castrol EDGE, a cutting-edge full synthetic 0W-20 motor oil, is part of the company’s line of low viscosity 0W-20 lubricants. It is our toughest oil and is made to endure high temperatures and pressure. For those who want to push their car to the limit, it’s the perfect choice. Full synthetic 0W-20 motor oil liquid Castrol GTX MAGNATEC is designed with protective, clever ingredients that offer outstanding wear prevention.
Toyota 5W-20 oil is it synthetic?
Compared to the most widely used grades, it aids in improving fuel economy and increasing engine efficiency. The actual savings vary depending on the type of vehicle/engine, the weather, the road conditions, and the viscosity of your present motor oil.
- Fast protection and quick starting in cold weather contribute to extending engine life.
Does it matter whether I use synthetic or conventional oil?
Yes, synthetic oil is superior to regular oil for engines. While conventional oil, or mineral oil, can provide enough lubrication, it cannot match the overall engine protection and performance offered by synthetic oils.
When opposed to the less refined base oils used in conventional oils, synthetics use higher grade base oils, making conventional oils:
- easier to oxidize and acidify
- Less stable chemically
- faster to degrade and lose protective properties
In general, full synthetic motor oils outperform traditional and synthetic blend motor oils in terms of engine protection and performance. The sophisticated complete synthetic motor oils from Mobil 1TM are precisely developed with an additive system that offers performance advantages over conventional and synthetic blend oils by:
- preventing oil deterioration
- minimizing wear
- preventing sludge and deposit accumulation
- safeguarding against extreme temperatures
Therefore, all of the chemistry that is developed in a lab has a significant impact on the road.