Extended Performance 5W-30 Full Synthetic Motor Oil, 5 Quart, by Mobil 1 (Part No. 14977)
In This Article...
What type of oil can I use in a 2014 Toyota Tacoma V6?
Toyota advises using only authentic Toyota motor oil when changing the oil in a 2014 Toyota Tacoma.
To make it even simpler for you, I did the research and located authentic oil and filter goods on Amazon.
For 2.7 L engines, the 2014 Toyota Tacoma requires 6.1 q of 0W-20, and for 4.0 L engines, 4.8/5.5 q of 5W-30.
In the absence of Toyota engine oil, any oil that complies with the requirements of the ILSAC-GF-5 multigrade oil can be used.
Toyota adds that if SAE 0W-20 or 5W-30 are unavailable, respectively, 5W-20 or 10W-30 may be used in their place, but only once consecutively.
Except where otherwise noted, the data presented in this article was taken directly from the 2014 Toyota Tacoma owner’s manual. You are in charge of making sure the right oil is used in your truck.
The 2014 Toyota Tacoma V6 uses how much oil?
For instance, a 4-cylinder engine needs at least 5 quarts of oil, whereas a 6-cylinder engine needs about 6 quarts.
What kind of oil can I use in a Toyota Tacoma?
Which is better for your Toyota Tacoma when it comes to oil changes or additions? The best oils on the market were identified because we want to ensure that you give your Tacoma the greatest care possible. Below are our conclusions.
Toyota Tacoma requires 5W-20 and 0W-20 oil, both of which are readily available on the market. Selecting an API-certified engine oil might help if you want to make sure the oil you use is good for your Toyota. Despite the fact that there are many great non-certified oils available, API certification might provide you piece of mind while lubricating your motor. The top seven oils for your Toyota Tacoma are shown below:
- Castrol Edge Advanced Full Synthetic SAE 0W-20 Extended Performance
- Extended Performance Full Synthetic 5W-20 from Mobil 1
- Advanced Full Synthetic 0W-20 Valvoline
- Platinum Full Synthetic 0W-20 Pennzoil
- Full Synthetic Shell Rotella 5W-20
- New Generation Liqui Molygen 0W-20
- SAE 0W-20 Royal Purple
You still have a lot to learn about properly maintaining your Toyota Tacoma. Continue reading to learn how to check your Tacoma’s oil, how many quarts are required, where to locate the filter, and other topics.
We hope the links provided are helpful to you before you continue reading. We may receive a commission if you buy something after clicking on one of the links on this page, so thank you!
What kind of oil is suggested for Toyota?
In addition to preventing corrosion and lumping, the ideal mixture of Toyota Synthetic and Mobil 1 Synthetic Motor Oil functions smoothly in both low and high temperatures. Every six months or 10,000 miles, Toyota advises having factory-trained technicians perform an oil change (whichever comes first).
The Toyota Tacoma V6 uses what kind of oil?
Oil filter, hardware, and 6 liters of 5W-30 Toyota Tacoma engine oil for 4.0L V6 applications. Enhanced engine protection with Ravenol CleanSynto oil technology.
What is engine oil 0W-20?
In colder temperatures, 0W-20 motor oil flows as freely as 0 Weight oil, but once the engine reaches operating temperature, it behaves more like 20 Weight oil. This guarantees that oil will begin to flow through the engine right away, lubricating important engine components even in cold weather.
The ‘W’ in viscosity descriptions does not, contrary to popular belief, stand for weight. In actuality, it represents Winter. This means that synthetic 0W-20 oil performs as a 0 Weight oil in cold areas but becomes as thick and viscous as a 20 Weight oil once the typical engine temperature has been attained.
Castrol EDGE, a cutting-edge full synthetic 0W-20 motor oil, is part of the company’s line of low viscosity 0W-20 lubricants. It is our toughest oil and is made to endure high temperatures and pressure. For those who want to push their car to the limit, it’s the perfect choice. Full synthetic 0W-20 motor oil liquid Castrol GTX MAGNATEC is designed with protective, clever ingredients that offer outstanding wear prevention.
The best oil for a 2014 Toyota Corolla is
Use 0W-20 completely synthetic motor oil in your 2014 Toyota Corolla to keep it operating smoothly. This will not only make it possible for your car to start in cold weather, but it should also increase your Corolla’s fuel efficiency and even provide a little bit of giddy-up.
Use SAE 5W-20 motor oil in the blended, totally synthetic, or traditional varieties if 0W-20 is unavailable or sold out. Simply remember to switch back to 0W-20 at the subsequent oil change if you must use 5W-20.
To own a car, you must have insurance, just like you need fuel and oil. But first, download the Jerry app to compare quotes so you can always get the best deal on insurance for your Corolla.
In just 45 seconds, Jerry, a certified broker and insurance comparison tool, gathers quotes from more than 55 of the best insurers. Jerry can assist you with canceling your old insurance after locating a fantastic cost for your 2014 Toyota Corolla and purchasing new coverage. Users save more than $800 year on average.
How frequently should I have my 2014 Toyota Tacoma’s oil changed?
Toyota suggests changing the oil and filter in your 2014 Toyota Tacoma every 3,000 to 5,000 miles, but it’s important to consult your owner’s manual and your dealer to determine the intervals that are most effective for your car.
Can I substitute 5W20 for 0W20?
One of the low-temperature grades added to the SAE J300 EOVC system after 1952 is 0W20 motor oil (0W20 oil). It is a liquid designed to behave as an SAE 20 once the engine reaches its operating temperature but flow as easily as an SAE 0 in subzero conditions.
Even at -35C/-31F, this type of oil will still start to flow through the engine’s oil channels. This oil lubricates important engine components, making it simpler for you to start your engine cold in the winter.
W20 vs 5W20 Fuel Economy
Another low-temperature grade often advised for winter use is 5W20 motor oil, with 10W-30 serving as an option for higher temperatures. Because it offers the best fuel economy, reduces fuel consumption, and produces fewer exhaust pollutants, this oil type is widely used. Motor companies and governments all around the world, led by those in Japan, Europe, and the US, are looking for 5W20.
Low viscosity, high-quality synthetic grades 0W20 and 5W20 can both significantly improve fuel economy. When employed in fair-weather temperatures, their attributes are identical. When utilized in cold temperatures, there is little to no difference between the two variants.
How frequently should a Toyota Tacoma have its oil changed?
For standard oil, Toyota advises changing your 2021 Toyota Tacoma’s oil and filter every 3,0005,000 miles. Changing synthetic oil should be done every 7,500 to 10,000 miles. Remember that the easiest way to find out the appropriate intervals for your car is to consult the owner’s manual and your dealer.
Toyota 0W-20 oil is synthetic, right?
Finding the ideal motor oil for your car is more challenging now that there are so many options available. Oil types like OW-20 are currently becoming much more widespread. Why should you use this oil? What is it?
Toyota car owners now favor the new 0W-20 Oil over other types of oils.
The cost of a quart of the pure synthetic 0W-20 oil is approximately $6.36. Although a quart costs quite a bit, it is the best oil you can use in your Toyota.
The use of synthetic oil is spreading. Simply said, it outperforms traditional motor oil in a wider range of driving circumstances and doesn’t degrade as quickly. Toyota advises using it in all of their vehicles, with the exception of select 4Runner/Tacoma and Flex Fuel Tundra/Sequoia models, because it is so well-liked (see: is Synthetic Oil Good or Bad).
Visit your local Toyota dealership soon and ask about this new, lighter oil. These days, it is the ideal option for your Toyota automobile.
Do I need synthetic oil for my Toyota?
Only Toyota cars (apart from 3UR-FBE Engines*) that require 0w-20 synthetic oil have been given the go-ahead for longer oil change intervals of 10,000 miles or 12 months. (You should, though, keep checking the oil level frequently and topping off as necessary. This will enable your engine to benefit fully from synthetic oil.)
Is full synthetic Toyota oil recommended?
There are two sorts of oil in the world, regular and synthetic, apart from different viscosities. Although there is a third variety that combines the first two, you often deal with either one or the other. The best option for your Toyota? What kind of oil is used in your Toyota? We offer all the solutions you require.
Does a Toyota need a specific kind of oil?
At this point, all current Toyota vehicles either require synthetic oil or at least recommend it. You must reference your manual to be certain. However, if you only decide to use synthetic oil, it will be far better for your engine and will simplify everything.