High Mileage 5W-20 Full Synthetic Motor Oil, 5 Quart, from Mobil 1 (Part No. 120768) Product Features: For engines with more than 75,000 miles, Mobil 1 High Mileage full-synthetic motor oil 5W-20 is made to allow up to 10,000 miles between oil changes.
In This Article...
Is synthetic oil necessary for a 2012 Toyota Highlander?
The 2012 Toyota is protected by cutting-edge synthetic material that resists chemical breakdown for ultimate wear protection for your car. This goes much further than the typical 3,000-mile oil change frequency. Filtered, 6.4 quarts Check the oil level after refueling.
Toyota Highlanders need synthetic oil, right?
Oil is essential for maintaining a clean, cool engine in any car, including the Toyota Highlander. Your engine’s moving parts are lubricated, which helps to stop wear and tear.
The oil in your car is thick and cold when you first start it. As the engine warms up, the oil thins and flows more swiftly. This makes it possible for it to more efficiently lubricate the engine parts.
Toyota advises using full synthetic oil in the Highlander for maximum performance and engine protection. But which viscosity should you pick?
For newer Toyota Highlander models, Toyota Genuine full synthetic 0w-20 oil is the best option. However, it is advisable to choose complete synthetic 5w-30 oil if you have an older model with higher mileage.
Depending on the year and mileage, a Toyota repair may occasionally suggest using a complete synthetic 5w-20.
Full synthetic oil will not only guarantee that your engine is operating at peak efficiency, but it will also allow you to travel 7,500–10,000 miles between oil changes.
The normal oil can still be used, but you will need to change it every 3,500 to 5,000 miles. Additionally, synthetic oil and your engine won’t be protected by conventional oil if you drive a lot.
For more information on the recommended oil for your specific Highlander model, be sure to consult your owner’s manual or with a Toyota-certified repair. Your car can need a different type of oil depending on its year and mileage.
What type of oil should I use in my 2012 Toyota?
The 2.5L and 3.5L engines are available for the 2012 Toyota Camry. The 2.5L (153 cc) engine requires 4.5 quarts of SAE 0W-20 oil to be used. The 3.5L (211 ci) engine requires 6.4 quarts of SAE 0W-20 oil to be used.
You can use the typical SAE 5W-20 oil for one oil change if the lower viscosity oil is not readily available. Make sure SAE 0W-20 is on hand the next time you get your oil changed.
Depending on the oil you use, you need to replace your oil every 3,000 to 10,000 miles. If you use synthetic oil, you can wait longer.
How can you turn a 2012 Toyota Highlander’s oil maintenance light back on?
If you are certain that the light is malfunctioning, it makes sense that you would want to reset it yourself. By following these instructions, you can reset the oil maintenance light on your 2012 Toyota Highlander:
- Activate the RUN position on the ignition if your Highlander has a key. Push the starter button once without depressing the brake if your Highlander has one.
- Turn off your car after confirming that Trip Meter A is displayed on the dashboard.
- On your dashboard, push and hold the trip meter reset button.
- Holding down the button causes the ignition to turn back to the RUN position.
- Check your display after starting your engine to ensure that the light has reset.
- Release the button only when the display says 000000. Release the button after which to switch off your car.
Even while doing this would turn off the maintenance light, it’s still a good idea to get the issue looked at by a professional, particularly if the oil light reappears after the light has been turned off. Not just a low oil level, but a number of additional issues, can be indicated by the light. Even if you haven’t yet traveled the anticipated mileage, you can still require an oil change.
Keeping an eye on your car is usually a good idea, but it doesn’t have to be expensive. Because of this, the Jerry app was created to provide you with the best vehicle insurance prices in just one minute. Download the app, then fill out a few short questions to access a lengthy collection of quotes chosen just for you. Jerry drivers save $879 annually on auto insurance.
What kind of oil does Toyota suggest?
For brand-new vehicles, Toyota suggests using Toyota Genuine SAE 0W-20 Full-Synthetic motor oil. Older models might need Toyota Genuine 5W-30 motor oil; if in doubt, check with one of our service consultants or the owner’s manual.
Is full synthetic Toyota oil recommended?
There are two sorts of oil in the world, regular and synthetic, apart from different viscosities. Although there is a third variety that combines the first two, you often deal with either one or the other. The best option for your Toyota? What kind of oil is used in your Toyota? We offer all the solutions you require.
Does a Toyota need a specific kind of oil?
At this point, all current Toyota vehicles either require synthetic oil or at least recommend it. You must reference your manual to be certain. However, if you only decide to use synthetic oil, it will be far better for your engine and will simplify everything.
How frequently should a Toyota Highlander have its synthetic oil changed?
Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles. For traditional oil, Toyota suggests changing your 2020 Toyota Highlander’s oil and filter every 3,000 to 5,000 miles.
What is engine oil 0W-20?
In colder temperatures, 0W-20 motor oil flows as freely as 0 Weight oil, but once the engine reaches operating temperature, it behaves more like 20 Weight oil. This guarantees that oil will begin to flow through the engine right away, lubricating important engine components even in cold weather.
The ‘W’ in viscosity descriptions does not, contrary to popular belief, stand for weight. In actuality, it represents Winter. This means that synthetic 0W-20 oil performs as a 0 Weight oil in cold areas but becomes as thick and viscous as a 20 Weight oil once the typical engine temperature has been attained.
Castrol EDGE, a cutting-edge full synthetic 0W-20 motor oil, is part of the company’s line of low viscosity 0W-20 lubricants. It is our toughest oil and is made to endure high temperatures and pressure. For those who want to push their car to the limit, it’s the perfect choice. Full synthetic 0W-20 motor oil liquid Castrol GTX MAGNATEC is designed with protective, clever ingredients that offer outstanding wear prevention.
Toyota uses synthetic oil for what reason?
In addition to preventing corrosion and lumping, the ideal mixture of Toyota Synthetic and Mobil 1 Synthetic Motor Oil functions smoothly in both low and high temperatures. Every six months or 10,000 miles, Toyota advises having factory-trained technicians perform an oil change (whichever comes first).
What Are the Benefits of Synthetic Oil?
It mostly depends on the model you purchase, how the engine was made, and what is advised in the owner’s manual whether your new Toyota utilizes synthetic or traditional oil. There are advantages and disadvantages to using each type of oil, but here are a few of the advantages of synthetic oil. Before using synthetic oil, make sure to verify with the Toyota service center in your area.
- increased protection against engine wear
- Enhanced Protection at Higher Temperatures
- Synthetic Oil Maintains Cleaner Engines
- Enhanced Protection for Performance and Turbocharged Parts
- Better Performance at Low Temperatures
How Often Should You Change Synthetic Oil?
To guarantee best performance, standard oil change intervals are commonly set as 5,000 miles or 6 months. That period is increased to 10,000 miles or 12 months on Toyota cars that are required to use 0W-20 synthetic oil. Within that time frame, you should still periodically check and top off the oil level. For other models, synthetic oil is an option, and regardless of the type of oil you choose to use in those models, it is advised that you stick to the 5,000-mile/6-month intervals.
0W-20 oil: is it synthetic?
High quality base oils and potent additives are required to manufacture a 0W-20. At very low temperatures, the basic oils must still be able to protect and flow. For the oil to flow smoothly at these low temperatures, a lot of synthetic oil is typically required. 0W-20 motor oils are either fully synthetic or partially synthetic (synthetic blend) and need synthetic base oils; they are not conventional (or mineral) motor oils. And the additives must be light enough to move easily while still guarding these more modern, sophisticated motors.
Which synthetic motor oil is the best?
Best Synthetic Motor Oils: A Ranking
- Extended Performance Synthetic Motor Oil from Mobil 1. Our preferred choice is this for a variety of reasons.
- High-Performance Synthetic Motor Oil in Royal Purple.
- Full synthetic diesel engine oil from Shell.
- Full synthetic Pennzoil Ultra Platinum motor oil
- MaxLife High Mileage Motor Oil from Valvoline.
Describe SAE oil.
Which is that? A rating system created by the SAE is used to categorize motor oils based on their viscosity (Society of Automotive Engineers).
On the motor oil labels, the letters “SAE should come before the oil viscosity. If it doesn’t, the oil might not meet the SAE viscosity grade requirements.
This implies that an oil labeled just “10W30 might not fulfill the viscosity criteria of the specified oil if your engine manufacturer recommends “SAE 10W-30.
The amount of oil a Toyota Highlander uses
These guidelines were developed using an oil change on a 2018 Highlander XLE 3.5L V6. While you can apply the fundamentals to different models and years, you should always reference your owner’s handbook for details particular to your car.
Warm up the engine
Start your engine and let it run for a while in cold weather to thin out the air and improve oil flow. A level space is recommended for parking your Toyota Highlander. Once the engine has warmed up, shut it off.
Drain the old oil
The drain bolt can then be removed by crawling underneath your Highlander. Allow the oil to drain for at least 15 minutes into your drain pan or another suitable container.
To stop leaks, replace the washer in your drain bolt. The oil drain bolt should then be installed once more and tightened.
Remove the filter
A 2018 Toyota Highlander’s oil filter is located underneath the vehicle. Utilizing the Toyota Highlander oil filter wrench, remove the filter housing. Take off the O-rings and old filter from the housing. Verify that the engine surface is free of any adhesion to the filter gasket.
Install the new oil filter
Before installing the replacement filter, clean the engine block of any debris and residue. Place the replacement filter and O-rings inside the housing after lubricating them.
Put new oil in the engine
5.8 quarts of engine oil should be poured into the oil fill hole. Start the engine after replacing the fill cap and making sure it is properly screwed in. Time you let the engine run for a while, look for leaks from the oil filter and drain bolt.
Stop the engine and check the oil level
Stop and wait for three minutes after running the engine for a while. Check the oil level with the dipstick and add extra if necessary.