For the 2007 Avalon, Toyota offers the following technical advise regarding oil viscosity: “SAE 5W30 is the optimum choice for good fuel economy and good starting in cold weather.
In This Article...
What kind of oil does Toyota advise using?
For brand-new vehicles, Toyota suggests using Toyota Genuine SAE 0W-20 Full-Synthetic motor oil. Older models might need Toyota Genuine 5W-30 motor oil; if in doubt, check with one of our service consultants or the owner’s manual.
Describe SAE 5w30.
A popular motor oil for light-duty gasoline and diesel engines is 5w30. 5w30 is a multi-grade oil, like the majority of modern motor oils, ranging from a lower viscosity grade of 5 to a higher viscosity grade of 30.
The “W” stands for “winter; the number before it denotes the thickness or viscosity of the oil at low temperatures (thus the “W”); the number following it denotes the thickness or viscosity of the oil at higher temperatures, when the engine is operating.
How frequently should a Toyota Avalon have its oil changed?
For traditional oil, Toyota advises changing your Toyota Avalon’s oil and filter every 3,000 to 5,000 miles. Generally speaking, synthetic oil needs to be changed every 7,500 to 10,000 miles.
For a Toyota Avalon, how much does an oil change cost?
A Toyota Avalon oil change typically costs between $142 and $156. Between $49 and $62 is the expected cost of labor, and between $92 and $94 is the estimated cost of parts. Taxes and other fees are not included in this range, nor are your particular model year or geographic area taken into account.
Do I need synthetic oil for my Toyota?
Only Toyota cars (apart from 3UR-FBE Engines*) that require 0w-20 synthetic oil have been given the go-ahead for longer oil change intervals of 10,000 miles or 12 months. (You should, though, keep checking the oil level frequently and topping off as necessary. This will enable your engine to benefit fully from synthetic oil.)
Is full synthetic Toyota oil recommended?
There are two sorts of oil in the world, regular and synthetic, apart from different viscosities. Although there is a third variety that combines the first two, you often deal with either one or the other. The best option for your Toyota? What kind of oil is used in your Toyota? We offer all the solutions you require.
Does a Toyota need a specific kind of oil?
At this point, all current Toyota vehicles either require synthetic oil or at least recommend it. You must reference your manual to be certain. However, if you only decide to use synthetic oil, it will be far better for your engine and will simplify everything.
Toyota 0W-20 oil is synthetic, right?
Finding the ideal motor oil for your car is more challenging now that there are so many options available. Oil types like OW-20 are currently becoming much more widespread. Why should you use this oil? What is it?
Toyota car owners now favor the new 0W-20 Oil over other types of oils.
The cost of a quart of the pure synthetic 0W-20 oil is approximately $6.36. Although a quart costs quite a bit, it is the best oil you can use in your Toyota.
The use of synthetic oil is spreading. Simply said, it outperforms traditional motor oil in a wider range of driving circumstances and doesn’t degrade as quickly. Toyota advises using it in all of their vehicles, with the exception of select 4Runner/Tacoma and Flex Fuel Tundra/Sequoia models, because it is so well-liked (see: is Synthetic Oil Good or Bad).
Visit your local Toyota dealership soon and ask about this new, lighter oil. These days, it is the ideal option for your Toyota automobile.
Are SAE and synthetic 5W-30 the same thing?
SAE 30 and 5w30 are not the same thing, to be clear. Because SAE 30 is a single-grade oil, it can only withstand one very high temperature rating. With a rating of 30, this high temperature is in the center. Contrarily, 5w30 is a multi-grade oil with two grades. It is rated at 30, which also applies to high temperatures, yet at low temperatures, it is classified at 5. This low-temperature grade is indicated by a “w, which stands for winter. These are the technical variations, but in the parts that follow, I’ll go into greater detail about each characteristic and application.
Can I swap out 5w20 with SAE 5W-30?
Yes. Using an oil with a greater viscosity, like 5w30, won’t cause short-term damage to your engine. To create uniform criteria for achieving realistic fuel efficiency and engine operating conditions, automakers collaborate closely with industry oil specialists like the SAE. These guidelines enable automakers to use particular oil grades and viscosities to achieve MPG and engine life objectives. The SAE claims that using low viscosity engine oil to increase fuel efficiency not only reduces frictional loss of the engine oil seal but also has no performance flaws.
Even though there are few practical differences between 5w30 and 5w20 in terms of fuel economy and engine wear, utilizing the recommended oil grade could void your powertrain warranty if the manufacturer. However, if your warranty is no longer valid, you can use any oil without any problems.
While using a thicker oil, such as 5w30, won’t cause your engine any short-term harm. It is advised that you, whenever feasible, abide by manufacturer recommendations.
Low-Shear-Rate Viscosity for 5w30 and 5w40
At 100g, the viscosity of 40 ranges from 12.5 to 16.3 mm2/s. At 100g, the operating viscosity of 30 ranges from 9.3 to 12.5 mm2/s. Both oils are 5 grade while they are cold, however at operating temperatures, 5w30 becomes 30 grade and 5w40 becomes 40 grade. With greater temperatures in the summer, 5w40 has a higher viscosity than 5w30, which aids in the motor’s continual operation.
High-Shear Rate Viscosity
This value is a minimum of 3.5 at 150g for a working viscosity of 40. The value of this parameter at 150g must be at least 2.9 for a working viscosity of 30. This indicator largely reveals how much the oil can withstand under harsh loads.
Application
Although it may be utilized by various types of cars and in a variety of temperatures, 5w30 is best in colder climates. Higher mileage engines frequently employ 5w40, which operates better in warmer climates.
In a 2008 Toyota Avalon, how many quarts of oil are used?
Let’s start with a much basic inquiry before discussing the type of oil your 2008 Toyota Avalon requires: how much oil is required?
The 3.5-liter V6 engine in a 2008 Toyota Avalon can hold 6.4 quarts (6.05 liters) of oil. You might be unsure of the definition of the 3.5-liter unit. That number represents your engine’s displacement, or the volume that the cylinders in your engine occupy. Your engine’s oil capacity, or how much oil you require for each oil change, is 6.05 liters. Make careful you don’t confuse the terms “engine capacity” and “engine displacement,” even though they are both measured in liters.
What kind of oil does a 2008 Toyota Avalon need?
The finest oil for the engine of your 2008 Toyota Avalon should now be understood. Look for SAE 5W-30 full synthetic oil when comparing prices, whether it’s on Amazon or at your local auto supplies store. To maintain the engine in your Avalon working at its best, Toyota advises that you install it.
We’ll explain it in simpler terms if you’re having trouble understanding the numbers and letters. While the W refers for winter, the 5 and the 30 both allude to the viscosity, or thickness, of the oil. The 30 defines the oil thickness at typical engine running temperature, whereas the 5 describes the oil thickness at lower temperatures.
Simply said, 5W-30 is the perfect oil for your 2008 Avalon engine since it is just thin enough to maintain flowing at 0F and thick enough to function at 212F.
What about detergent oil verses synthetic oil? Detergent oil is natural oil that has additional chemicals added by the oil producer to prevent corrosion, sludge, and debris buildup. On the other hand, synthetic oil is a mixture of various chemical lubricants. Toyota advises using only synthetic oil in its engines.
Just keep in mind to check for 5W-30 if you’re unsure of which oil to purchase. Three of our top picks for a 2008 Toyota Avalon are listed below: