No matter the type of wheel, the AWD Camry should have all tires inflated to 36 psi. As you can see from the chart above, most 2WD machines need 35 psi in both the front and rear wheels to operate at their best.
In This Article...
Why are your tires so important for your vehicle?
Naturally, it’s crucial to maintain your Camry’s tires at the proper pressure since they are the only four points of contact the vehicle has with the road. Every time you go out, you’ll experience superior efficiency, handling, and smoothness if your tread is even and your tires are properly inflated on all sides. A properly inflated tire also significantly lessens the strain on the axles of your car.
Additionally, the 2018 Camry has all-season tires as standard equipment, so you won’t have any trouble navigating any terrain or weather!
Optimal tire pressure of the 2018 Toyota Camry
A good rule of thumb is to maintain your tires inflated to 35 psi, or pounds per square inch, at both the front and back axles, although this can often be difficult to determine by eye. No matter where you’re going, you’ll have a responsive and comfortable ride this way! The 2018 Camry also includes a Tire Pressure Monitoring System, which employs sensors to warn you if your levels are falling too low. This system helps you have a better understanding of your tires’ performance.
What tire pressure is recommended for a 2017 Toyota Camry?
It’s crucial to top off the air when your tires are starting to look a bit low because studies show that underinflated or overinflated tires can reduce your Toyota’s fuel economy by up to 5%. The 2017 Toyota Camry’s factory-recommended tire pressure values are listed below.
Tire Pressure PSI for 2017 Toyota Camry
For the front tires on the 2017 Toyota Camry XLE, the original equipment tire size is P215/55R17 93, and for the rear tires, the original equipment tire size is P215/55R17 93, with a 35 PSI recommended tire pressure. Checking the pressure of your tires when they are “cold,” or have not been driven for at least three hours, is crucial since air pressure can expand when the tires are heated up, resulting in a more accurate pressure reading.
40 PSI—is it too much?
For some vehicles with specs within this range, a pressure of 40 psi may be suitable. But for some other tires, this number can likewise be too high or too low.
For example, sports automobiles or passenger cars may be suitable with a pressure level of 40 psi. However, this is too low for heavy trucks and below the recommended pressure of 35 psi for small cars.
The recommended pressure range for tires on well-known sports cars and passenger vehicles is 32 to 40 psi. Depending on the type of vehicle, a specific index will be given. It should be noted that this level is suggested while the tire is cold, so after a lengthy trip, you must check it again to ensure proper adjustment.
There are many various car models available today, and each will utilize a different type of tire. Therefore, the manufacturer will decide in advance what pressure should be used in each of these tires.
It is your responsibility to maintain the best level for the car to run safely and smoothly. To find out whether or not this 40 psi pressure level is good for your car, you must first verify the tire specifications.
What results from excessive tire pressure?
Less of the tire contacts the ground if tire pressure is too high. Your automobile will consequently jolt around on the road. Additionally, grip is hampered and stopping distances increase when your tires are bouncing rather than being securely planted on the pavement. Additionally, the comfort of the ride will lessen.
Is a tire pressure of 30 psi ideal?
Your tires have a tire pressure marking on the sidewall, but this is not the recommended tire pressure; rather, it is the maximum.
For instance, the words “Max. Press. 35 PSI” denote the highest pounds per square inch pressure required for your tire to support the weight of its maximum load-carrying capacity. Most passenger automobiles will have a suggested or ideal pressure of 30 or 32 PSI for regular use.
Is 44 psi excessive?
The tire should be filled almost to its maximum pressure. That is, if the tire’s maximum pressure rating is 44 PSI, you should raise it to 42 or 43 PSI. You should disregard the suggested tire pressure (often 30 PSI) on the driver’s door.
Should the pressure in each tire be the same?
The owner’s manual for your car contains the recommended PSI for the front and rear tires. Each tire will have a maximum psi that you may check as well. However, keep in mind that you shouldn’t pressurize your tires to their maximum pressure.
Each tire has a number inscribed on it as a reference, but this number applies to all tires, not just the ones on the car you own.
You can find the precise ideal PSI for both the front and back tires in your owner’s manual.
To account for the heavy engine that is often positioned at the front of most vehicles, the front tires typically need a little bit of extra tire pressure (especially front-wheel-drive cars). As a result, the optimal PSI for the front tires will differ from that for the back tires.
The idea that all four tires on your car should be inflated to the same pressure is untrue. Regardless of the tire manufacturer or the PSI recommended in the owner’s handbook, any tires you purchase for the same vehicle will need the same tire pressure.
What is a low tire pressure?
We’ve already established why driving with low tire pressure is not a good idea. However, pay attention if you’re curious about how “low you can go and yet drive your car.
The lowest tire pressure you can typically drive with if your tires are normal passenger tires, which 90 percent of vehicles have, is 20 pounds per square inch (PSI). A flat tire is defined as having less than 20 PSI, which puts you at risk of a possibly disastrous blowout.
How can the tire pressure be checked on the Toyota Camry dashboard?
That you are being cautious with your new car is fantastic! Observe these procedures to check the tire pressure on a 2018 Toyota Camry:
- Restart your automobile after turning it off. It’s possible that your tires or the sensor itself are malfunctioning if the TPMS indicator illuminates and blinks.
- As your vehicle records the tire pressure for each tire, let it run for three to five minutes.
- Locate the reset button on the instrument panel’s lower right and press and hold it there while waiting for the TPMS light to flash three times.
- Start the car’s engine.
It’s still a good idea to check your tires with a gauge even though this will alert you if your tire pressure is dangerously low. This will enable you to check that each tire is at the recommended tire pressure for 2018 Camrys in cold weather, which is 32 psi.
Why not spend a moment on the Jerry app learning about your insurance options while you’re learning more about your new car? Download Jerry and respond to a few short questions to quickly receive competitive bids. The typical user saves $879 yearly!
On a 2019 Toyota Camry, how do you reset the tire pressure light?
Resetting the Tire Pressure Light on a Toyota Turn the key to the “On position when the car is off, but don’t let it run. When the tire pressure light blinks three times, release pressure on the TPMS reset button. Start the car and let it run for 20 minutes to let the sensor reset.