What is the bolt pattern for Toyota Tacoma wheels?
The wheel bolt pattern for vehicles with two-wheel drive and models from 2000 to 2020 is five lugs, 4.5 inches (114.3 mm) high, positive offset. A 4WD vehicle has a medium offset of 6 lugs, 5.5 inches, or 139.7 mm.
Although having this knowledge is crucial, it might not be sufficient to enable you to make the necessary adjustments when you wish to change the vehicle’s tires. Because of this, we are going to give you some additional information here. For even more accurate information, be sure to take the time to search for the model year or trim model on Vehicle History.
In This Article...
What is the Toyota Tacoma’s bolt pattern for 2008?
The bolt pattern of a 2008 Toyota Tacoma Regular Cab 2wd is 5-114.3 mm. This indicates that there are 5 lugs and that the circumference of the circle formed by the lugs is 114.3 mm, or 4.5 inches.
What is the third generation Tacoma’s bolt pattern?
Running your original equipment wheels can save you money, and you might also appreciate the way they appear. However, you can experience problems with your upper control arms being hit or rubbed by bigger and wider tires when using your factory wheels (UCA). In order to push the tire away from the UCA and provide you better clearance when switching to larger tires, you often require wheels with a zero or negative offset.
The decision to use aftermarket wheels is influenced by several different things. There is a wheel for everyone, regardless of whether you want it for off-road functionality or looks.
The following details I first check that a wheel has:
- Wheel/Center 106mm bore
- Zero or negative offset is an offset.
- the 6139.7mm or 65.5 bolt pattern
mm SCS (Stealth Custom Series) F5
In my opinion, a wheel with zero offset is preferable because it keeps the width low for shorter trails while pulling the tire out to the edge of the fender and sticking out somewhat. The SCS (Stealth Custom Series) F5 with a -38mm offset is a prime example of offset. That will force your wheel 1.5 times out of the well, which is a lot. Most wheels will have an offset of -6mm (.2) or -10mm (.4).
What is the 2014 Toyota Tacoma’s bolt pattern?
The bolt pattern for the 2014 Toyota Tacoma 2wd Prerunner Double Cab is 6-139.7 mm. This indicates that there are 6 lugs, and the circumference of the circle formed by the lugs is 139.7 mm, or 5.5 inches.
Are there any Tacomas with different bolt patterns?
What are the Toyota Tacoma’s wheel bolt patterns, then? All current models of the Toyota Tacoma have the following wheel bolt pattern: For 2WD vehicles, the positive offset is five lugs, 4.5 inches, or 114.3 mm high. Six lug, 5.5 inch, or 139.7 mm medium offset for 4WD vehicles.
Will 4Runner wheels fit Tacomas?
Will 4Runner TRD Pro Wheels Fit A Tacoma? No. A Tacoma’s TRD Pro wheels won’t fit on a 4Runner. The reason for this is that 16″ Tacoma-designed wheels cannot fit the 4Runner’s braking rotors and calipers because they are too large.
Which wheel sizes work with my Tacoma?
Nothing catches my eye more quickly than a Tacoma with large tires. Just how good do they look? If you want to perform serious off-roading and overlanding with the Tacoma, you really need to go bigger to notice the wheels and enhance break-over angles. This explains why so many people are interested in learning what tire size will fit comfortably on a stock Tacoma. Can 33 inches fit without a lift? Will you require a front leveling kit or wheel spacers? This essay will provide answers to all of these queries and more.
What size tire can you fit on a Toyota Tacoma that is factory-fresh? The largest tire that will fit on factory rims without a body or suspension lift is 275/70/17. To fit 33-inch tires, or 285/70/17, on a stock suspension, the front fender liner and rear fender flair must be altered.
Therefore, there are three things to think about before upgrading the factory tires on your truck or ute.
- Clearance for fender liners
- Wheel offset and backspacing
- spare wheel room
Since the 275/70/17 tire is narrower but still offers more ground clearance with the 70 profile, which is 1 inch taller but the same width as the factory, you can get away with installing a wider tire on the stock Tacoma rims.
But what if you want to travel 33 miles per hour with a factory suspension and a 0 offset wheel? What adjustments are necessary to make them fit?
My Toyota Tacoma will fit 17-inch wheels, but can I?
Please take note that these suggestions are based on OEM wheels. You can use a wider tire by using an updated rim with a different backspacing. Also, you should think about fender flares if you go very wide (more than 285).
Maximum tire sizes are:
15-inch rims, 265/75 R15A Although a 265/80 R15 tire would fit well, to our knowledge no one manufactures one. The biggest size that is available is 265/75 R15.
You might be able to use some wider tires than those we’ve specified when adding a leveling kit. It could need some cutting, but it is still feasible.
15-inch wheels: If you have 15-inch wheels and have purchased a lift kit, spend a little more money and purchase some 16- or 17-inch wheels to go with it. There are no suitable tire sizes for 15-inch wheels.
Reminder: If you’re considering a three-lift, you should think about getting a new set of wheels or getting some wheel spacers. The truth is that there aren’t many widely used tire sizes that can benefit from your raise while also fitting the stock rims.
You may widen the tires on the Tacoma to a maximum of 315mm using aftermarket rims (or about 12.5). However, if you choose to go this big, be ready to reduce the fenders and wheel wells because the tires will rub. The same holds true with 1.5 wheel spacers. Running tires as wide as 315 poses an increased danger of early front wheel bearing failure. The weight of 315 tires and the increased offset they demand were too much for the Tacoma front wheel bearing to support.
For three lift kits, a standard Tacoma tire width is 285mm. Thus, 17-inch wheels with 285/70 R17 tires are a wise choice (2 taller and .8 wider than factory). 285/75 R16 tires are identical in size to the 17-inch wheels for 16-inch wheels. In order to prevent rubbing, you will probably need to reduce the forward cab mount if you are interested in using tires of this size. In addition, even though there are many 285mm tires available, most of them need wheels that are 8″, which are wider than the OEM wheels.
What is the 2009 Tacoma’s bolt pattern?
The bolt pattern for the 2009 Toyota Tacoma Double Cab 4WD is 6-139.7 mm. This indicates that there are 6 lugs, and the circumference of the circle formed by the lugs is 139.7 mm, or 5.5 inches.
How many lugs does a 2010 Tundra have?
The bolt pattern on the 2010 Toyota Tundra Double Cab 4×4 is 5-150 mm. This indicates that there are 5 lugs, and the circumference of the circle formed by the lugs is 150 mm, or 5.9 inches.