The bolt pattern on the 2012 Toyota Tundra Double Cab 4×4 is 5-150 mm. This indicates that there are 5 lugs, and the circumference of the circle formed by the lugs is 150 mm, or 5.9 inches.
You should measure from the center of one lug to the outer edge of the lug farthest from it in order to obtain an accurate measurement of your five lug bolt pattern without the use of a bolt pattern tool.
In This Article...
What is the Tundra’s bolt pattern?
The second-generation Tundra adopted a 5-bolt, 5×150 wheel layout (5×5. 9″). According to images and videos, the third-generation Tundra has a 6-bolt wheel layout once again.
Are 5×5 5 and 5×150 equivalent?
The initial “5” of the phrase “5×5” denotes how many wheel studs your wheel mounts onto. It is five for the Jeep. Trucks may have 5, 6, or 8 while some automobiles have four.
5.9 inches is equal to 150 millimeters. On a JK, wheels with a 5x150mm lug pattern won’t fit.
The 5×150 bolt pattern is what?
The stud count (five) and bolt circle measurement (150), the notional circle determined by the studs’ centers, make up the 5×150 Bolt Pattern or Pitch Circle Diameter (PCD).
Common to FAW Toyota, Lexus, and Toyota automobiles is the 5×150 bolt pattern. The following is a complete list of car makes and models:
What is the Toyota Tundra’s bolt pattern for 2013?
Hub Centric Rings can be used to modify it. A hole in the center of a car’s wheel is known as a wheel bore. The fact that not every car has this particular dimension means that no matter what kind of automotive part you’re shopping for, it will likely have some variation on hub rings.
A bolt pattern is defined. The phrase might have come up before, but you don’t know what it implies. The center of a wheel is where the lug holes are positioned; this is known as the “lug pattern.” The first number indicates how many of these fictitious circles will be present around the tires of your cyclists when they are in use (the second one refers to their diameter).
Are the bolt patterns on Toyota vehicles uniform?
Although Toyota’s lug designs differ from model to model, the 5×4 bolt pattern is the most prevalent. Knowing your car’s lug pattern is necessary if you want to acquire a second set of wheels or repair a damaged rim.
How many lugs does a 2010 Tundra have?
The bolt pattern on the 2010 Toyota Tundra Double Cab 4×4 is 5-150 mm. This indicates that there are 5 lugs, and the circumference of the circle formed by the lugs is 150 mm, or 5.9 inches.
A Toyota pickup has what kind of bolt pattern?
The wheel bolt pattern for vehicles with two-wheel drive and models from 2000 to 2020 is five lugs, 4.5 inches (114.3 mm) high, positive offset. A 4WD vehicle has a medium offset of 6 lugs, 5.5 inches, or 139.7 mm.
Although having this knowledge is crucial, it might not be sufficient to enable you to make the necessary adjustments when you wish to change the vehicle’s tires. Because of this, we are going to give you some additional information here. For even more accurate information, be sure to take the time to search for the model year or trim model on Vehicle History.
Which wheels suit the Toyota Tundra?
Kit 3 Lift The options keep getting greater with a 3 lift kit. However, trimming is more likely to occur the broader the tire. Maximum tire sizes are:
- 16 rims: 285/75 R16this tire is 8/10ths wider and slightly more than 2 taller than factory. At full suspension compression or during tight turns, this breadth could present a challenge.
- 17 rims: 285/70 R17This tire is 8/10ths wider and little more than 2 higher than factory specifications. At full suspension compression or during tight turns, this breadth could present a challenge.
- 16 rims: 265/80 R16This tire is an interesting size; it is identical in width to the factory tires but is more than 2 inches taller.
Second-Gen Tundra
Max tire sizes for no lift kits are:
- 20 rims, same width but one inch taller with 275/60 R20 tires.
- 18 rims with 285/65 R185 tires that are 4/10ths wider and taller than stock. It might be essential to trim.
Leveling Kit 1.52 (or less) You might be able to use some wider tires than those we’ve specified when adding a leveling kit. It could need some cutting, but it is still feasible. Maximum tire sizes are:
- 18 wheels: 275/70 R18 One inch taller but with the same width as OEM wheels.
- 18 rims: 8/10ths wider and 295/65 R181 inch taller than stock. Due the width, trimming is probably necessary.
- 18 wheels with 285/70 R184 tires that are 1.7 inches higher and wider than stock. It might be essential to trim.
A 5×5 5 can it fit a 5×5?
It is what it is, the bolt pattern. Strength is largely the same, but it makes little difference because your axles won’t function for either. I’ll assume you have a JK. Your bolt pattern is 5×5, thus. Without adapters, you can’t put 5×5.5 tires on that, and I’m not even sure they produce 5×5 to 5×5.5 adapters.
Having saying that, a larger bolt pattern often has stronger axles. Out of a truck, tons.
What I’m essentially trying to convey is that the stock JK is OK. Purchase the desired 5×5 wheels and use them.
What does lug pattern 5×5 mean?
The stud count (five) and bolt circle measurement (five), the notional circle formed by the center position of the studs, make up the 5×5 Bolt Pattern or Pitch Circle Diameter (PCD).
Vehicles from Buick, Cadillac, Chevrolet, Chrysler, Daewoo, Dodge, and Fiat all use the 5×5 bolt pattern. The following is a complete list of car makes and models:
What is the Toyota Tundra’s bolt pattern for 2005?
The bolt pattern of the 2005 Toyota Tundra Double Cab SR5 2WD is 6-139.7 mm. This indicates that there are 6 lugs, and the circumference of the circle formed by the lugs is 139.7 mm, or 5.5 inches.
What trucks have a bolt pattern of 5×5-5?
The following is a complete list of car makes and models:
- ARO (1) 24 (1978-2006)
- BAW (4) BJ212 (2011-2020) Gladiator (2010-2020) Zhanqi (2005) Zhanqi (2010) Zhanqi (2015-2020) Pickup Zhanqi (2015-2016)
- Chevrolet (2) Niva Tracker (2002-2020) (1989-2009)
- Aspen (1) Chrysler (2006-2009)
- Daihatsu (3)
- Dodge (6)
- Ford (5)
- GAZ (3)
The 5×127 bolt pattern is what?
The stud count (five) and bolt circle dimension (127), the notional circle determined by the studs’ centers, make up the 5×127 Bolt Pattern or Pitch Circle Diameter (PCD).
Vehicles from Buick, Cadillac, Chevrolet, Chrysler, Daewoo, Dodge, and Fiat all use the 5×127 bolt pattern. The following is a complete list of car makes and models: